lkml.org 
[lkml]   [2011]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/4] regulator: Convert tps65023 to use regmap API
On Sat, Jul 09, 2011 at 01:50:44PM +0900, Mark Brown wrote:
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Acked-by: Liam Girdwood <lrg@ti.com>
> ---
> drivers/regulator/Kconfig | 1 +
> drivers/regulator/tps65023-regulator.c | 98 +++++++++-----------------------
> 2 files changed, 28 insertions(+), 71 deletions(-)

Nice diffstat. :-)

>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 065892a..8128db3 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -235,6 +235,7 @@ config REGULATOR_TPS6105X
> config REGULATOR_TPS65023
> tristate "TI TPS65023 Power regulators"
> depends on I2C
> + select REGMAP
> help
> This driver supports TPS65023 voltage regulator chips. TPS65023 provides
> three step-down converters and two general-purpose LDO voltage regulators.
> diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
> index fbddc15..3fa3ba5 100644
> --- a/drivers/regulator/tps65023-regulator.c
> +++ b/drivers/regulator/tps65023-regulator.c
> @@ -25,6 +25,7 @@
> #include <linux/i2c.h>
> #include <linux/delay.h>
> #include <linux/slab.h>
> +#include <linux/regmap.h>
>
> /* Register definitions */
> #define TPS65023_REG_VERSION 0
> @@ -125,93 +126,35 @@ struct tps_pmic {
> struct i2c_client *client;
> struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
> const struct tps_info *info[TPS65023_NUM_REGULATOR];
> - struct mutex io_lock;
> + struct regmap *regmap;
> };
>
> -static inline int tps_65023_read(struct tps_pmic *tps, u8 reg)
> -{
> - return i2c_smbus_read_byte_data(tps->client, reg);
> -}
> -
> -static inline int tps_65023_write(struct tps_pmic *tps, u8 reg, u8 val)
> -{
> - return i2c_smbus_write_byte_data(tps->client, reg, val);
> -}
> -
> static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
> {
> - int err, data;
> -
> - mutex_lock(&tps->io_lock);
> -
> - data = tps_65023_read(tps, reg);
> - if (data < 0) {
> - dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
> - err = data;
> - goto out;
> - }
> -
> - data |= mask;
> - err = tps_65023_write(tps, reg, data);
> - if (err)
> - dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
> -
> -out:
> - mutex_unlock(&tps->io_lock);
> - return err;
> + return regmap_update_bits(tps->regmap, reg, mask, mask);
> }
>
> static int tps_65023_clear_bits(struct tps_pmic *tps, u8 reg, u8 mask)
> {
> - int err, data;
> -
> - mutex_lock(&tps->io_lock);
> -
> - data = tps_65023_read(tps, reg);
> - if (data < 0) {
> - dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
> - err = data;
> - goto out;
> - }
> -
> - data &= ~mask;
> -
> - err = tps_65023_write(tps, reg, data);
> - if (err)
> - dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
> -
> -out:
> - mutex_unlock(&tps->io_lock);
> - return err;
> -
> + return regmap_update_bits(tps->regmap, reg, mask, 0);
> }
>
> static int tps_65023_reg_read(struct tps_pmic *tps, u8 reg)
> {
> - int data;
> + unsigned int val;
> + int ret;
>
> - mutex_lock(&tps->io_lock);
> + ret = regmap_read(tps->regmap, reg, &val);
>
> - data = tps_65023_read(tps, reg);
> - if (data < 0)
> - dev_err(&tps->client->dev, "Read from reg 0x%x failed\n", reg);
> -
> - mutex_unlock(&tps->io_lock);
> - return data;
> + if (ret != 0)
> + return ret;
> + else
> + return val;
> }
>
> static int tps_65023_reg_write(struct tps_pmic *tps, u8 reg, u8 val)
> {
> - int err;
> -
> - mutex_lock(&tps->io_lock);
> -
> - err = tps_65023_write(tps, reg, val);
> - if (err < 0)
> - dev_err(&tps->client->dev, "Write for reg 0x%x failed\n", reg);
> -
> - mutex_unlock(&tps->io_lock);
> - return err;
> + return regmap_write(tps->regmap, reg, val);
> }
>
> static int tps65023_dcdc_is_enabled(struct regulator_dev *dev)
> @@ -463,6 +406,10 @@ static struct regulator_ops tps65023_ldo_ops = {
> .list_voltage = tps65023_ldo_list_voltage,
> };
>
> +static struct regmap_config tps65023_regmap_config = {
> + .reg_bits = 8, .val_bits = 8,
> +};
> +
> static int __devinit tps_65023_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -488,7 +435,13 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
> if (!tps)
> return -ENOMEM;
>
> - mutex_init(&tps->io_lock);
> + tps->regmap = regmap_init(&client->dev, &tps65023_regmap_config);

Yeah, if this usage is typical, the caller will always know exactly
what kind of regmap it needs to set up because it had an i2c_client or
an spi_device instance. I think it would be better to drop the
central registration of regmap bus types and use bus-specific init
variant. It just makes for one more bit of registration
infrastructure that needs to be setup before any drivers us it.

> + if (IS_ERR(tps->regmap)) {
> + error = PTR_ERR(tps->regmap);
> + dev_err(&client->dev, "Failed to allocate register map: %d\n",
> + error);
> + goto fail_alloc;
> + }
>
> /* common for all regulators */
> tps->client = client;
> @@ -523,10 +476,12 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
>
> return 0;
>
> - fail:
> +fail:
> while (--i >= 0)
> regulator_unregister(tps->rdev[i]);
>
> + regmap_exit(tps->regmap);
> +fail_alloc:
> kfree(tps);
> return error;
> }
> @@ -545,6 +500,7 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
> for (i = 0; i < TPS65023_NUM_REGULATOR; i++)
> regulator_unregister(tps->rdev[i]);
>
> + regmap_exit(tps->regmap);
> kfree(tps);
>
> return 0;
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


\
 
 \ /
  Last update: 2011-07-15 04:57    [from the cache]
©2003-2011 Jasper Spaans