lkml.org 
[lkml]   [2011]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] pch_gpio: Support interrupt function
Hi Grant,

(2011/07/05 14:52), Tomoya MORINAGA wrote:
> (2011/07/05 12:59), Grant Likely wrote:
>>> As we discussed before,
>>> without specifying PCH_IRQ_BASE,
>>> it seemed IRQ number collision issue occurred.
>>> Thus, I added PCH_IRQ_BASE.
>>
>> Then fix the irq collision. If the core code hands out an irq range
>> that is in-use by some other driver, then the other driver isn't
>> reserving it's irqs correctly and it needs to be fixed. Hacking
>> around the problem doesn't help anything in the long run.
>>
>
> I tried to work irq_alloc_descs with dynamic allocation.(Set 2nd
> parameter as 0).
> However it seems the issue remains to be seen.
> I attached dmesg output log, /proc/interrupts log and modified PCH-GPIO
> source code.
>
> Could you give me your opinion or information ?
>
> NOTE: I tested on linux-3.0-rc3
>
How is it going ?

--
tomoya
OKI SEMICONDUCTOR CO., LTD.


\
 
 \ /
  Last update: 2011-07-11 10:29    [W:0.055 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site