lkml.org 
[lkml]   [2011]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[patch v2 2/2] x86, mtrr: use __stop_machine() for doing MTRR rendezvous
MTRR rendezvous seqeuence using stop_one_cpu_nowait() can potentially
happen in parallel with another system wide rendezvous using
stop_machine(). This can lead to deadlock.

MTRR rendezvous sequence is not implemened using stop_machine() before, as this
gets called both from the process context aswell as the cpu online paths
(where the cpu has not come online and the interrupts are disabled etc).

Now that __stop_machine() works even when the calling cpu is not online,
use __stop_machine() to implement the MTRR rendezvous sequence. This
will consolidate the code aswell as avoid the above mentioned deadlock.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: stable@kernel.org # v2.6.35+
---
arch/x86/kernel/cpu/mtrr/main.c | 154 +++++++---------------------------------
1 file changed, 27 insertions(+), 127 deletions(-)

Index: tree/arch/x86/kernel/cpu/mtrr/main.c
===================================================================
--- tree.orig/arch/x86/kernel/cpu/mtrr/main.c
+++ tree/arch/x86/kernel/cpu/mtrr/main.c
@@ -137,18 +137,15 @@ static void __init init_table(void)
}

struct set_mtrr_data {
- atomic_t count;
- atomic_t gate;
unsigned long smp_base;
unsigned long smp_size;
unsigned int smp_reg;
mtrr_type smp_type;
};

-static DEFINE_PER_CPU(struct cpu_stop_work, mtrr_work);
-
/**
- * mtrr_work_handler - Synchronisation handler. Executed by "other" CPUs.
+ * mtrr_work_handler - Work done in the synchronisation handler. Executed by
+ * all the CPUs.
* @info: pointer to mtrr configuration data
*
* Returns nothing.
@@ -157,35 +154,26 @@ static int mtrr_work_handler(void *info)
{
#ifdef CONFIG_SMP
struct set_mtrr_data *data = info;
- unsigned long flags;
-
- atomic_dec(&data->count);
- while (!atomic_read(&data->gate))
- cpu_relax();
-
- local_irq_save(flags);

- atomic_dec(&data->count);
- while (atomic_read(&data->gate))
- cpu_relax();
-
- /* The master has cleared me to execute */
+ /*
+ * We use this same function to initialize the mtrrs during boot,
+ * resume, runtime cpu online and on an explicit request to set a
+ * specific MTRR.
+ *
+ * During boot or suspend, the state of the boot cpu's mtrrs has been
+ * saved, and we want to replicate that across all the cpus that come
+ * online (either at the end of boot or resume or during a runtime cpu
+ * online). If we're doing that, @reg is set to something special and on
+ * all the cpu's we do mtrr_if->set_all() (On the logical cpu that
+ * started the boot/resume sequence, this might be a duplicate
+ * set_all()).
+ */
if (data->smp_reg != ~0U) {
mtrr_if->set(data->smp_reg, data->smp_base,
data->smp_size, data->smp_type);
- } else if (mtrr_aps_delayed_init) {
- /*
- * Initialize the MTRRs inaddition to the synchronisation.
- */
+ } else if (mtrr_aps_delayed_init || !cpu_online(smp_processor_id())) {
mtrr_if->set_all();
}
-
- atomic_dec(&data->count);
- while (!atomic_read(&data->gate))
- cpu_relax();
-
- atomic_dec(&data->count);
- local_irq_restore(flags);
#endif
return 0;
}
@@ -223,20 +211,11 @@ static inline int types_compatible(mtrr_
* 14. Wait for buddies to catch up
* 15. Enable interrupts.
*
- * What does that mean for us? Well, first we set data.count to the number
- * of CPUs. As each CPU announces that it started the rendezvous handler by
- * decrementing the count, We reset data.count and set the data.gate flag
- * allowing all the cpu's to proceed with the work. As each cpu disables
- * interrupts, it'll decrement data.count once. We wait until it hits 0 and
- * proceed. We clear the data.gate flag and reset data.count. Meanwhile, they
- * are waiting for that flag to be cleared. Once it's cleared, each
- * CPU goes through the transition of updating MTRRs.
- * The CPU vendors may each do it differently,
- * so we call mtrr_if->set() callback and let them take care of it.
- * When they're done, they again decrement data->count and wait for data.gate
- * to be set.
- * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
- * Everyone then enables interrupts and we all continue on.
+ * What does that mean for us? Well, __stop_machine() will ensure that
+ * the rendezvous handler is started on each CPU. And in lockstep they
+ * do the state transition of disabling interrupts, updating MTRR's
+ * (the CPU vendors may each do it differently, so we call mtrr_if->set()
+ * callback and let them take care of it.) and enabling interrupts.
*
* Note that the mechanism is the same for UP systems, too; all the SMP stuff
* becomes nops.
@@ -244,92 +223,13 @@ static inline int types_compatible(mtrr_
static void
set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
{
- struct set_mtrr_data data;
- unsigned long flags;
- int cpu;
-
- preempt_disable();
-
- data.smp_reg = reg;
- data.smp_base = base;
- data.smp_size = size;
- data.smp_type = type;
- atomic_set(&data.count, num_booting_cpus() - 1);
-
- /* Make sure data.count is visible before unleashing other CPUs */
- smp_wmb();
- atomic_set(&data.gate, 0);
-
- /* Start the ball rolling on other CPUs */
- for_each_online_cpu(cpu) {
- struct cpu_stop_work *work = &per_cpu(mtrr_work, cpu);
-
- if (cpu == smp_processor_id())
- continue;
-
- stop_one_cpu_nowait(cpu, mtrr_work_handler, &data, work);
- }
-
-
- while (atomic_read(&data.count))
- cpu_relax();
-
- /* Ok, reset count and toggle gate */
- atomic_set(&data.count, num_booting_cpus() - 1);
- smp_wmb();
- atomic_set(&data.gate, 1);
-
- local_irq_save(flags);
-
- while (atomic_read(&data.count))
- cpu_relax();
-
- /* Ok, reset count and toggle gate */
- atomic_set(&data.count, num_booting_cpus() - 1);
- smp_wmb();
- atomic_set(&data.gate, 0);
-
- /* Do our MTRR business */
-
- /*
- * HACK!
- *
- * We use this same function to initialize the mtrrs during boot,
- * resume, runtime cpu online and on an explicit request to set a
- * specific MTRR.
- *
- * During boot or suspend, the state of the boot cpu's mtrrs has been
- * saved, and we want to replicate that across all the cpus that come
- * online (either at the end of boot or resume or during a runtime cpu
- * online). If we're doing that, @reg is set to something special and on
- * this cpu we still do mtrr_if->set_all(). During boot/resume, this
- * is unnecessary if at this point we are still on the cpu that started
- * the boot/resume sequence. But there is no guarantee that we are still
- * on the same cpu. So we do mtrr_if->set_all() on this cpu aswell to be
- * sure that we are in sync with everyone else.
- */
- if (reg != ~0U)
- mtrr_if->set(reg, base, size, type);
- else
- mtrr_if->set_all();
-
- /* Wait for the others */
- while (atomic_read(&data.count))
- cpu_relax();
-
- atomic_set(&data.count, num_booting_cpus() - 1);
- smp_wmb();
- atomic_set(&data.gate, 1);
-
- /*
- * Wait here for everyone to have seen the gate change
- * So we're the last ones to touch 'data'
- */
- while (atomic_read(&data.count))
- cpu_relax();
+ struct set_mtrr_data data = { .smp_reg = reg,
+ .smp_base = base,
+ .smp_size = size,
+ .smp_type = type
+ };

- local_irq_restore(flags);
- preempt_enable();
+ __stop_machine(mtrr_work_handler, &data, cpu_callout_mask);
}

/**



\
 
 \ /
  Last update: 2011-06-07 22:19    [W:0.050 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site