lkml.org 
[lkml]   [2011]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 23/29] gma500: being abstracting out devices a bit more
Date
From: Alan Cox <alan@linux.intel.com>

We really want to move towards a completely abstracted interface rather
than having tons of per chip junk in the same files.

Begin with the power code which is probably the worst offender. Add a set
of methods, initialise a dev_priv->ops pointer and rip the chip specifics
out of the power code. While we are it pick up the display init bits.

So we know it's now chip specifics clean remove the psb_ naming from it.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

drivers/staging/gma500/Makefile | 5
drivers/staging/gma500/mdfld_device.c | 610 +++++++++++++++++++
drivers/staging/gma500/mdfld_output.c | 15
drivers/staging/gma500/mdfld_output.h | 2
drivers/staging/gma500/mrst_device.c | 230 +++++++
drivers/staging/gma500/power.c | 320 ++++++++++
drivers/staging/gma500/psb_device.c | 174 +++++
drivers/staging/gma500/psb_drv.c | 47 +
drivers/staging/gma500/psb_drv.h | 29 +
drivers/staging/gma500/psb_fb.c | 12
drivers/staging/gma500/psb_powermgmt.c | 1051 --------------------------------
11 files changed, 1402 insertions(+), 1093 deletions(-)
create mode 100644 drivers/staging/gma500/mdfld_device.c
create mode 100644 drivers/staging/gma500/mrst_device.c
create mode 100644 drivers/staging/gma500/power.c
create mode 100644 drivers/staging/gma500/psb_device.c
delete mode 100644 drivers/staging/gma500/psb_powermgmt.c


diff --git a/drivers/staging/gma500/Makefile b/drivers/staging/gma500/Makefile
index fdaac63..e93cbe3 100644
--- a/drivers/staging/gma500/Makefile
+++ b/drivers/staging/gma500/Makefile
@@ -4,6 +4,7 @@
ccflags-y += -Iinclude/drm

psb_gfx-y += gem_glue.o \
+ power.o \
psb_bl.o \
psb_drv.o \
psb_gem.o \
@@ -19,11 +20,13 @@ psb_gfx-y += gem_glue.o \
psb_intel_sdvo.o \
psb_lid.o \
psb_mmu.o \
- psb_powermgmt.o \
psb_irq.o \
+ psb_device.o \
+ mrst_device.o \
mrst_crtc.o \
mrst_lvds.o \
mrst_bios.o \
+ mdfld_device.o \
mdfld_output.o \
mdfld_pyr_cmd.o \
mdfld_tmd_vid.o \
diff --git a/drivers/staging/gma500/mdfld_device.c b/drivers/staging/gma500/mdfld_device.c
new file mode 100644
index 0000000..7caa7cd
--- /dev/null
+++ b/drivers/staging/gma500/mdfld_device.c
@@ -0,0 +1,610 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "mdfld_output.h"
+#include "mdfld_dsi_output.h"
+
+/*
+ * Provide the Medfield specific chip logic and low level methods
+ */
+
+static void mdfld_init_pm(struct drm_device *dev)
+{
+ /* No work needed here yet */
+}
+
+/**
+ * mdfld_save_display_registers - save registers for pipe
+ * @dev: our device
+ * @pipe: pipe to save
+ *
+ * Save the pipe state of the device before we power it off. Keep everything
+ * we need to put it back again
+ */
+static int mdfld_save_display_registers(struct drm_device *dev, int pipe)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int i;
+
+ /* register */
+ u32 dpll_reg = MRST_DPLL_A;
+ u32 fp_reg = MRST_FPA0;
+ u32 pipeconf_reg = PIPEACONF;
+ u32 htot_reg = HTOTAL_A;
+ u32 hblank_reg = HBLANK_A;
+ u32 hsync_reg = HSYNC_A;
+ u32 vtot_reg = VTOTAL_A;
+ u32 vblank_reg = VBLANK_A;
+ u32 vsync_reg = VSYNC_A;
+ u32 pipesrc_reg = PIPEASRC;
+ u32 dspstride_reg = DSPASTRIDE;
+ u32 dsplinoff_reg = DSPALINOFF;
+ u32 dsptileoff_reg = DSPATILEOFF;
+ u32 dspsize_reg = DSPASIZE;
+ u32 dsppos_reg = DSPAPOS;
+ u32 dspsurf_reg = DSPASURF;
+ u32 mipi_reg = MIPI;
+ u32 dspcntr_reg = DSPACNTR;
+ u32 dspstatus_reg = PIPEASTAT;
+ u32 palette_reg = PALETTE_A;
+
+ /* pointer to values */
+ u32 *dpll_val = &dev_priv->saveDPLL_A;
+ u32 *fp_val = &dev_priv->saveFPA0;
+ u32 *pipeconf_val = &dev_priv->savePIPEACONF;
+ u32 *htot_val = &dev_priv->saveHTOTAL_A;
+ u32 *hblank_val = &dev_priv->saveHBLANK_A;
+ u32 *hsync_val = &dev_priv->saveHSYNC_A;
+ u32 *vtot_val = &dev_priv->saveVTOTAL_A;
+ u32 *vblank_val = &dev_priv->saveVBLANK_A;
+ u32 *vsync_val = &dev_priv->saveVSYNC_A;
+ u32 *pipesrc_val = &dev_priv->savePIPEASRC;
+ u32 *dspstride_val = &dev_priv->saveDSPASTRIDE;
+ u32 *dsplinoff_val = &dev_priv->saveDSPALINOFF;
+ u32 *dsptileoff_val = &dev_priv->saveDSPATILEOFF;
+ u32 *dspsize_val = &dev_priv->saveDSPASIZE;
+ u32 *dsppos_val = &dev_priv->saveDSPAPOS;
+ u32 *dspsurf_val = &dev_priv->saveDSPASURF;
+ u32 *mipi_val = &dev_priv->saveMIPI;
+ u32 *dspcntr_val = &dev_priv->saveDSPACNTR;
+ u32 *dspstatus_val = &dev_priv->saveDSPASTATUS;
+ u32 *palette_val = dev_priv->save_palette_a;
+
+ switch (pipe) {
+ case 0:
+ break;
+ case 1:
+ /* register */
+ dpll_reg = MDFLD_DPLL_B;
+ fp_reg = MDFLD_DPLL_DIV0;
+ pipeconf_reg = PIPEBCONF;
+ htot_reg = HTOTAL_B;
+ hblank_reg = HBLANK_B;
+ hsync_reg = HSYNC_B;
+ vtot_reg = VTOTAL_B;
+ vblank_reg = VBLANK_B;
+ vsync_reg = VSYNC_B;
+ pipesrc_reg = PIPEBSRC;
+ dspstride_reg = DSPBSTRIDE;
+ dsplinoff_reg = DSPBLINOFF;
+ dsptileoff_reg = DSPBTILEOFF;
+ dspsize_reg = DSPBSIZE;
+ dsppos_reg = DSPBPOS;
+ dspsurf_reg = DSPBSURF;
+ dspcntr_reg = DSPBCNTR;
+ dspstatus_reg = PIPEBSTAT;
+ palette_reg = PALETTE_B;
+
+ /* values */
+ dpll_val = &dev_priv->saveDPLL_B;
+ fp_val = &dev_priv->saveFPB0;
+ pipeconf_val = &dev_priv->savePIPEBCONF;
+ htot_val = &dev_priv->saveHTOTAL_B;
+ hblank_val = &dev_priv->saveHBLANK_B;
+ hsync_val = &dev_priv->saveHSYNC_B;
+ vtot_val = &dev_priv->saveVTOTAL_B;
+ vblank_val = &dev_priv->saveVBLANK_B;
+ vsync_val = &dev_priv->saveVSYNC_B;
+ pipesrc_val = &dev_priv->savePIPEBSRC;
+ dspstride_val = &dev_priv->saveDSPBSTRIDE;
+ dsplinoff_val = &dev_priv->saveDSPBLINOFF;
+ dsptileoff_val = &dev_priv->saveDSPBTILEOFF;
+ dspsize_val = &dev_priv->saveDSPBSIZE;
+ dsppos_val = &dev_priv->saveDSPBPOS;
+ dspsurf_val = &dev_priv->saveDSPBSURF;
+ dspcntr_val = &dev_priv->saveDSPBCNTR;
+ dspstatus_val = &dev_priv->saveDSPBSTATUS;
+ palette_val = dev_priv->save_palette_b;
+ break;
+ case 2:
+ /* register */
+ pipeconf_reg = PIPECCONF;
+ htot_reg = HTOTAL_C;
+ hblank_reg = HBLANK_C;
+ hsync_reg = HSYNC_C;
+ vtot_reg = VTOTAL_C;
+ vblank_reg = VBLANK_C;
+ vsync_reg = VSYNC_C;
+ pipesrc_reg = PIPECSRC;
+ dspstride_reg = DSPCSTRIDE;
+ dsplinoff_reg = DSPCLINOFF;
+ dsptileoff_reg = DSPCTILEOFF;
+ dspsize_reg = DSPCSIZE;
+ dsppos_reg = DSPCPOS;
+ dspsurf_reg = DSPCSURF;
+ mipi_reg = MIPI_C;
+ dspcntr_reg = DSPCCNTR;
+ dspstatus_reg = PIPECSTAT;
+ palette_reg = PALETTE_C;
+
+ /* pointer to values */
+ pipeconf_val = &dev_priv->savePIPECCONF;
+ htot_val = &dev_priv->saveHTOTAL_C;
+ hblank_val = &dev_priv->saveHBLANK_C;
+ hsync_val = &dev_priv->saveHSYNC_C;
+ vtot_val = &dev_priv->saveVTOTAL_C;
+ vblank_val = &dev_priv->saveVBLANK_C;
+ vsync_val = &dev_priv->saveVSYNC_C;
+ pipesrc_val = &dev_priv->savePIPECSRC;
+ dspstride_val = &dev_priv->saveDSPCSTRIDE;
+ dsplinoff_val = &dev_priv->saveDSPCLINOFF;
+ dsptileoff_val = &dev_priv->saveDSPCTILEOFF;
+ dspsize_val = &dev_priv->saveDSPCSIZE;
+ dsppos_val = &dev_priv->saveDSPCPOS;
+ dspsurf_val = &dev_priv->saveDSPCSURF;
+ mipi_val = &dev_priv->saveMIPI_C;
+ dspcntr_val = &dev_priv->saveDSPCCNTR;
+ dspstatus_val = &dev_priv->saveDSPCSTATUS;
+ palette_val = dev_priv->save_palette_c;
+ break;
+ default:
+ DRM_ERROR("%s, invalid pipe number.\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Pipe & plane A info */
+ *dpll_val = PSB_RVDC32(dpll_reg);
+ *fp_val = PSB_RVDC32(fp_reg);
+ *pipeconf_val = PSB_RVDC32(pipeconf_reg);
+ *htot_val = PSB_RVDC32(htot_reg);
+ *hblank_val = PSB_RVDC32(hblank_reg);
+ *hsync_val = PSB_RVDC32(hsync_reg);
+ *vtot_val = PSB_RVDC32(vtot_reg);
+ *vblank_val = PSB_RVDC32(vblank_reg);
+ *vsync_val = PSB_RVDC32(vsync_reg);
+ *pipesrc_val = PSB_RVDC32(pipesrc_reg);
+ *dspstride_val = PSB_RVDC32(dspstride_reg);
+ *dsplinoff_val = PSB_RVDC32(dsplinoff_reg);
+ *dsptileoff_val = PSB_RVDC32(dsptileoff_reg);
+ *dspsize_val = PSB_RVDC32(dspsize_reg);
+ *dsppos_val = PSB_RVDC32(dsppos_reg);
+ *dspsurf_val = PSB_RVDC32(dspsurf_reg);
+ *dspcntr_val = PSB_RVDC32(dspcntr_reg);
+ *dspstatus_val = PSB_RVDC32(dspstatus_reg);
+
+ /*save palette (gamma) */
+ for (i = 0; i < 256; i++)
+ palette_val[i] = PSB_RVDC32(palette_reg + (i<<2));
+
+ if (pipe == 1) {
+ dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
+ dev_priv->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL);
+ dev_priv->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL);
+ return 0;
+ }
+ *mipi_val = PSB_RVDC32(mipi_reg);
+ return 0;
+}
+
+/**
+ * mdfld_save_cursor_overlay_registers - save cursor overlay info
+ * @dev: our device
+ *
+ * Save the cursor and overlay register state
+ */
+static int mdfld_save_cursor_overlay_registers(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ /* Save cursor regs */
+ dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
+ dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
+ dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
+
+ dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR);
+ dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE);
+ dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS);
+
+ dev_priv->saveDSPCCURSOR_CTRL = PSB_RVDC32(CURCCNTR);
+ dev_priv->saveDSPCCURSOR_BASE = PSB_RVDC32(CURCBASE);
+ dev_priv->saveDSPCCURSOR_POS = PSB_RVDC32(CURCPOS);
+
+ /* HW overlay */
+ dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD);
+ dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
+ dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
+ dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
+ dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
+ dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
+ dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
+
+ dev_priv->saveOV_OVADD_C = PSB_RVDC32(OV_OVADD + OV_C_OFFSET);
+ dev_priv->saveOV_OGAMC0_C = PSB_RVDC32(OV_OGAMC0 + OV_C_OFFSET);
+ dev_priv->saveOV_OGAMC1_C = PSB_RVDC32(OV_OGAMC1 + OV_C_OFFSET);
+ dev_priv->saveOV_OGAMC2_C = PSB_RVDC32(OV_OGAMC2 + OV_C_OFFSET);
+ dev_priv->saveOV_OGAMC3_C = PSB_RVDC32(OV_OGAMC3 + OV_C_OFFSET);
+ dev_priv->saveOV_OGAMC4_C = PSB_RVDC32(OV_OGAMC4 + OV_C_OFFSET);
+ dev_priv->saveOV_OGAMC5_C = PSB_RVDC32(OV_OGAMC5 + OV_C_OFFSET);
+
+ return 0;
+}
+/*
+ * mdfld_restore_display_registers - restore the state of a pipe
+ * @dev: our device
+ * @pipe: the pipe to restore
+ *
+ * Restore the state of a pipe to that which was saved by the register save
+ * functions.
+ */
+static int mdfld_restore_display_registers(struct drm_device *dev, int pipe)
+{
+ /* To get panel out of ULPS mode */
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct mdfld_dsi_config *dsi_config = NULL;
+ u32 i = 0;
+ u32 dpll = 0;
+ u32 timeout = 0;
+ u32 reg_offset = 0;
+
+ /* register */
+ u32 dpll_reg = MRST_DPLL_A;
+ u32 fp_reg = MRST_FPA0;
+ u32 pipeconf_reg = PIPEACONF;
+ u32 htot_reg = HTOTAL_A;
+ u32 hblank_reg = HBLANK_A;
+ u32 hsync_reg = HSYNC_A;
+ u32 vtot_reg = VTOTAL_A;
+ u32 vblank_reg = VBLANK_A;
+ u32 vsync_reg = VSYNC_A;
+ u32 pipesrc_reg = PIPEASRC;
+ u32 dspstride_reg = DSPASTRIDE;
+ u32 dsplinoff_reg = DSPALINOFF;
+ u32 dsptileoff_reg = DSPATILEOFF;
+ u32 dspsize_reg = DSPASIZE;
+ u32 dsppos_reg = DSPAPOS;
+ u32 dspsurf_reg = DSPASURF;
+ u32 dspstatus_reg = PIPEASTAT;
+ u32 mipi_reg = MIPI;
+ u32 dspcntr_reg = DSPACNTR;
+ u32 palette_reg = PALETTE_A;
+
+ /* values */
+ u32 dpll_val = dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE;
+ u32 fp_val = dev_priv->saveFPA0;
+ u32 pipeconf_val = dev_priv->savePIPEACONF;
+ u32 htot_val = dev_priv->saveHTOTAL_A;
+ u32 hblank_val = dev_priv->saveHBLANK_A;
+ u32 hsync_val = dev_priv->saveHSYNC_A;
+ u32 vtot_val = dev_priv->saveVTOTAL_A;
+ u32 vblank_val = dev_priv->saveVBLANK_A;
+ u32 vsync_val = dev_priv->saveVSYNC_A;
+ u32 pipesrc_val = dev_priv->savePIPEASRC;
+ u32 dspstride_val = dev_priv->saveDSPASTRIDE;
+ u32 dsplinoff_val = dev_priv->saveDSPALINOFF;
+ u32 dsptileoff_val = dev_priv->saveDSPATILEOFF;
+ u32 dspsize_val = dev_priv->saveDSPASIZE;
+ u32 dsppos_val = dev_priv->saveDSPAPOS;
+ u32 dspsurf_val = dev_priv->saveDSPASURF;
+ u32 dspstatus_val = dev_priv->saveDSPASTATUS;
+ u32 mipi_val = dev_priv->saveMIPI;
+ u32 dspcntr_val = dev_priv->saveDSPACNTR;
+ u32 *palette_val = dev_priv->save_palette_a;
+
+ switch (pipe) {
+ case 0:
+ dsi_config = dev_priv->dsi_configs[0];
+ break;
+ case 1:
+ /* register */
+ dpll_reg = MDFLD_DPLL_B;
+ fp_reg = MDFLD_DPLL_DIV0;
+ pipeconf_reg = PIPEBCONF;
+ htot_reg = HTOTAL_B;
+ hblank_reg = HBLANK_B;
+ hsync_reg = HSYNC_B;
+ vtot_reg = VTOTAL_B;
+ vblank_reg = VBLANK_B;
+ vsync_reg = VSYNC_B;
+ pipesrc_reg = PIPEBSRC;
+ dspstride_reg = DSPBSTRIDE;
+ dsplinoff_reg = DSPBLINOFF;
+ dsptileoff_reg = DSPBTILEOFF;
+ dspsize_reg = DSPBSIZE;
+ dsppos_reg = DSPBPOS;
+ dspsurf_reg = DSPBSURF;
+ dspcntr_reg = DSPBCNTR;
+ palette_reg = PALETTE_B;
+ dspstatus_reg = PIPEBSTAT;
+
+ /* values */
+ dpll_val = dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE;
+ fp_val = dev_priv->saveFPB0;
+ pipeconf_val = dev_priv->savePIPEBCONF;
+ htot_val = dev_priv->saveHTOTAL_B;
+ hblank_val = dev_priv->saveHBLANK_B;
+ hsync_val = dev_priv->saveHSYNC_B;
+ vtot_val = dev_priv->saveVTOTAL_B;
+ vblank_val = dev_priv->saveVBLANK_B;
+ vsync_val = dev_priv->saveVSYNC_B;
+ pipesrc_val = dev_priv->savePIPEBSRC;
+ dspstride_val = dev_priv->saveDSPBSTRIDE;
+ dsplinoff_val = dev_priv->saveDSPBLINOFF;
+ dsptileoff_val = dev_priv->saveDSPBTILEOFF;
+ dspsize_val = dev_priv->saveDSPBSIZE;
+ dsppos_val = dev_priv->saveDSPBPOS;
+ dspsurf_val = dev_priv->saveDSPBSURF;
+ dspcntr_val = dev_priv->saveDSPBCNTR;
+ dspstatus_val = dev_priv->saveDSPBSTATUS;
+ palette_val = dev_priv->save_palette_b;
+ break;
+ case 2:
+ reg_offset = MIPIC_REG_OFFSET;
+
+ /* register */
+ pipeconf_reg = PIPECCONF;
+ htot_reg = HTOTAL_C;
+ hblank_reg = HBLANK_C;
+ hsync_reg = HSYNC_C;
+ vtot_reg = VTOTAL_C;
+ vblank_reg = VBLANK_C;
+ vsync_reg = VSYNC_C;
+ pipesrc_reg = PIPECSRC;
+ dspstride_reg = DSPCSTRIDE;
+ dsplinoff_reg = DSPCLINOFF;
+ dsptileoff_reg = DSPCTILEOFF;
+ dspsize_reg = DSPCSIZE;
+ dsppos_reg = DSPCPOS;
+ dspsurf_reg = DSPCSURF;
+ mipi_reg = MIPI_C;
+ dspcntr_reg = DSPCCNTR;
+ palette_reg = PALETTE_C;
+ dspstatus_reg = PIPECSTAT;
+
+ /* values */
+ pipeconf_val = dev_priv->savePIPECCONF;
+ htot_val = dev_priv->saveHTOTAL_C;
+ hblank_val = dev_priv->saveHBLANK_C;
+ hsync_val = dev_priv->saveHSYNC_C;
+ vtot_val = dev_priv->saveVTOTAL_C;
+ vblank_val = dev_priv->saveVBLANK_C;
+ vsync_val = dev_priv->saveVSYNC_C;
+ pipesrc_val = dev_priv->savePIPECSRC;
+ dspstride_val = dev_priv->saveDSPCSTRIDE;
+ dsplinoff_val = dev_priv->saveDSPCLINOFF;
+ dsptileoff_val = dev_priv->saveDSPCTILEOFF;
+ dspsize_val = dev_priv->saveDSPCSIZE;
+ dsppos_val = dev_priv->saveDSPCPOS;
+ dspsurf_val = dev_priv->saveDSPCSURF;
+ dspstatus_val = dev_priv->saveDSPCSTATUS;
+ mipi_val = dev_priv->saveMIPI_C;
+ dspcntr_val = dev_priv->saveDSPCCNTR;
+ palette_val = dev_priv->save_palette_c;
+
+ dsi_config = dev_priv->dsi_configs[1];
+ break;
+ default:
+ DRM_ERROR("%s, invalid pipe number.\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Make sure VGA plane is off. it initializes to on after reset!*/
+ PSB_WVDC32(0x80000000, VGACNTRL);
+ if (pipe == 1) {
+ PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, dpll_reg);
+ PSB_RVDC32(dpll_reg);
+
+ PSB_WVDC32(fp_val, fp_reg);
+ } else {
+ dpll = PSB_RVDC32(dpll_reg);
+
+ if (!(dpll & DPLL_VCO_ENABLE)) {
+
+ /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
+ if (dpll & MDFLD_PWR_GATE_EN) {
+ dpll &= ~MDFLD_PWR_GATE_EN;
+ PSB_WVDC32(dpll, dpll_reg);
+ udelay(500); /* FIXME: 1 ? */
+ }
+
+ PSB_WVDC32(fp_val, fp_reg);
+ PSB_WVDC32(dpll_val, dpll_reg);
+ /* FIXME_MDFLD PO - change 500 to 1 after PO */
+ udelay(500);
+
+ dpll_val |= DPLL_VCO_ENABLE;
+ PSB_WVDC32(dpll_val, dpll_reg);
+ PSB_RVDC32(dpll_reg);
+
+ /* wait for DSI PLL to lock */
+ while ((timeout < 20000) && !(PSB_RVDC32(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
+ udelay(150);
+ timeout++;
+ }
+
+ if (timeout == 20000) {
+ DRM_ERROR("%s, can't lock DSIPLL.\n",
+ __func__);
+ return -EINVAL;
+ }
+ }
+ }
+ /* Restore mode */
+ PSB_WVDC32(htot_val, htot_reg);
+ PSB_WVDC32(hblank_val, hblank_reg);
+ PSB_WVDC32(hsync_val, hsync_reg);
+ PSB_WVDC32(vtot_val, vtot_reg);
+ PSB_WVDC32(vblank_val, vblank_reg);
+ PSB_WVDC32(vsync_val, vsync_reg);
+ PSB_WVDC32(pipesrc_val, pipesrc_reg);
+ PSB_WVDC32(dspstatus_val, dspstatus_reg);
+
+ /* Set up the plane */
+ PSB_WVDC32(dspstride_val, dspstride_reg);
+ PSB_WVDC32(dsplinoff_val, dsplinoff_reg);
+ PSB_WVDC32(dsptileoff_val, dsptileoff_reg);
+ PSB_WVDC32(dspsize_val, dspsize_reg);
+ PSB_WVDC32(dsppos_val, dsppos_reg);
+ PSB_WVDC32(dspsurf_val, dspsurf_reg);
+
+ if (pipe == 1) {
+ PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL);
+ PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
+ PSB_WVDC32(dev_priv->saveHDMIPHYMISCCTL, HDMIPHYMISCCTL);
+ PSB_WVDC32(dev_priv->saveHDMIB_CONTROL, HDMIB_CONTROL);
+
+ } else {
+ /* Set up pipe related registers */
+ PSB_WVDC32(mipi_val, mipi_reg);
+ /* Setup MIPI adapter + MIPI IP registers */
+ mdfld_dsi_controller_init(dsi_config, pipe);
+ msleep(20);
+ }
+ /* Enable the plane */
+ PSB_WVDC32(dspcntr_val, dspcntr_reg);
+ msleep(20);
+ /* Enable the pipe */
+ PSB_WVDC32(pipeconf_val, pipeconf_reg);
+
+ for (i = 0; i < 256; i++)
+ PSB_WVDC32(palette_val[i], palette_reg + (i<<2));
+ if (pipe == 1)
+ return 0;
+ if (IS_MFLD(dev) && !mdfld_panel_dpi(dev))
+ mdfld_enable_te(dev, pipe);
+ return 0;
+}
+
+/**
+ * mdfld_restore_cursor_overlay_registers - restore cursor
+ * @dev: our device
+ *
+ * Restore the cursor and overlay state that was saved earlier
+ */
+static int mdfld_restore_cursor_overlay_registers(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ /* Enable Cursor A */
+ PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR);
+ PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS);
+ PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE);
+
+ PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR);
+ PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS);
+ PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE);
+
+ PSB_WVDC32(dev_priv->saveDSPCCURSOR_CTRL, CURCCNTR);
+ PSB_WVDC32(dev_priv->saveDSPCCURSOR_POS, CURCPOS);
+ PSB_WVDC32(dev_priv->saveDSPCCURSOR_BASE, CURCBASE);
+
+ /* Restore HW overlay */
+ PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5);
+
+ PSB_WVDC32(dev_priv->saveOV_OVADD_C, OV_OVADD + OV_C_OFFSET);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC0_C, OV_OGAMC0 + OV_C_OFFSET);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC1_C, OV_OGAMC1 + OV_C_OFFSET);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC2_C, OV_OGAMC2 + OV_C_OFFSET);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC3_C, OV_OGAMC3 + OV_C_OFFSET);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC4_C, OV_OGAMC4 + OV_C_OFFSET);
+ PSB_WVDC32(dev_priv->saveOV_OGAMC5_C, OV_OGAMC5 + OV_C_OFFSET);
+
+ return 0;
+}
+
+/**
+ * mdfld_save_display_registers - save registers lost on suspend
+ * @dev: our DRM device
+ *
+ * Save the state we need in order to be able to restore the interface
+ * upon resume from suspend
+ */
+static int mdfld_save_registers(struct drm_device *dev)
+{
+ /* FIXME: We need to shut down panels here if using them
+ and once the right bits are merged */
+ mdfld_save_cursor_overlay_registers(dev);
+ mdfld_save_display_registers(dev, 0);
+ mdfld_save_display_registers(dev, 0);
+ mdfld_save_display_registers(dev, 2);
+ mdfld_save_display_registers(dev, 1);
+ mdfld_disable_crtc(dev, 0);
+ mdfld_disable_crtc(dev, 2);
+ mdfld_disable_crtc(dev, 1);
+ return 0;
+}
+
+/**
+ * mdfld_restore_display_registers - restore lost register state
+ * @dev: our DRM device
+ *
+ * Restore register state that was lost during suspend and resume.
+ */
+static int mdfld_restore_registers(struct drm_device *dev)
+{
+ mdfld_restore_display_registers(dev, 1);
+ mdfld_restore_display_registers(dev, 0);
+ mdfld_restore_display_registers(dev, 2);
+ mdfld_restore_cursor_overlay_registers(dev);
+ return 0;
+}
+
+static int mdfld_power_down(struct drm_device *dev)
+{
+ /* FIXME */
+ return 0;
+}
+
+static int mdfld_power_up(struct drm_device *dev)
+{
+ /* FIXME */
+ return 0;
+}
+
+const struct psb_ops mdfld_chip_ops = {
+ .output_init = mdfld_output_init,
+ .init_pm = mdfld_init_pm,
+ .save_regs = mdfld_save_registers,
+ .restore_regs = mdfld_restore_registers,
+ .power_down = mdfld_power_down,
+ .power_up = mdfld_power_up,
+};
+
diff --git a/drivers/staging/gma500/mdfld_output.c b/drivers/staging/gma500/mdfld_output.c
index b1fc765..7e11401 100644
--- a/drivers/staging/gma500/mdfld_output.c
+++ b/drivers/staging/gma500/mdfld_output.c
@@ -63,14 +63,20 @@ int mdfld_panel_dpi(struct drm_device *dev)
}
}

-static void init_panel(struct drm_device *dev, int mipi_pipe, int p_type)
+static int init_panel(struct drm_device *dev, int mipi_pipe, int p_type)
{
struct panel_funcs *p_cmd_funcs;
struct panel_funcs *p_vid_funcs;

/* Oh boy ... FIXME */
p_cmd_funcs = kzalloc(sizeof(struct panel_funcs), GFP_KERNEL);
+ if (p_cmd_funcs == NULL)
+ return -ENODEV;
p_vid_funcs = kzalloc(sizeof(struct panel_funcs), GFP_KERNEL);
+ if (p_vid_funcs == NULL) {
+ kfree(p_cmd_funcs);
+ return -ENODEV;
+ }

switch (p_type) {
case TPO_CMD:
@@ -115,11 +121,12 @@ static void init_panel(struct drm_device *dev, int mipi_pipe, int p_type)
#endif
default:
dev_err(dev->dev, "Unsupported interface %d", p_type);
- break;
+ return -ENODEV;
}
+ return 0;
}

-void mdfld_output_init(struct drm_device *dev)
+int mdfld_output_init(struct drm_device *dev)
{
int type;

@@ -132,4 +139,6 @@ void mdfld_output_init(struct drm_device *dev)
type = mdfld_get_panel_type(dev, 2);
dev_info(dev->dev, "panel 2: type is %d\n", type);
init_panel(dev, 2, type);
+
+ return 0;
}
diff --git a/drivers/staging/gma500/mdfld_output.h b/drivers/staging/gma500/mdfld_output.h
index 36f43e1..53b57db 100644
--- a/drivers/staging/gma500/mdfld_output.h
+++ b/drivers/staging/gma500/mdfld_output.h
@@ -69,7 +69,7 @@ struct panel_funcs {
int (*get_panel_info) (struct drm_device *, int, struct panel_info *);
};

-void mdfld_output_init(struct drm_device *dev);
+int mdfld_output_init(struct drm_device *dev);
int mdfld_panel_dpi(struct drm_device *dev);
int mdfld_get_panel_type(struct drm_device *dev, int pipe);
void mdfld_disable_crtc (struct drm_device *dev, int pipe);
diff --git a/drivers/staging/gma500/mrst_device.c b/drivers/staging/gma500/mrst_device.c
new file mode 100644
index 0000000..5cd8283
--- /dev/null
+++ b/drivers/staging/gma500/mrst_device.c
@@ -0,0 +1,230 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include <asm/intel_scu_ipc.h>
+
+/* IPC message and command defines used to enable/disable mipi panel voltages */
+#define IPC_MSG_PANEL_ON_OFF 0xE9
+#define IPC_CMD_PANEL_ON 1
+#define IPC_CMD_PANEL_OFF 0
+
+static int mrst_output_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ if (dev_priv->iLVDS_enable) {
+ mrst_lvds_init(dev, &dev_priv->mode_dev);
+ return 0;
+ }
+ dev_err(dev->dev, "DSI is not supported\n");
+ return -ENODEV;
+}
+
+/*
+ * Provide the Moorestown specific chip logic and low level methods
+ */
+
+static void mrst_init_pm(struct drm_device *dev)
+{
+}
+
+/**
+ * mrst_save_display_registers - save registers lost on suspend
+ * @dev: our DRM device
+ *
+ * Save the state we need in order to be able to restore the interface
+ * upon resume from suspend
+ */
+static int mrst_save_display_registers(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct drm_connector *connector;
+
+ /* Display arbitration control + watermarks */
+ dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
+ dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
+ dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
+ dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
+ dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
+ dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
+ dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
+ dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+ /* Save crtc and output state */
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ if (drm_helper_crtc_in_use(crtc))
+ crtc->funcs->save(crtc);
+ }
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ connector->funcs->save(connector);
+
+ mutex_unlock(&dev->mode_config.mutex);
+ return 0;
+}
+
+/**
+ * mrst_restore_display_registers - restore lost register state
+ * @dev: our DRM device
+ *
+ * Restore register state that was lost during suspend and resume.
+ */
+static int mrst_restore_display_registers(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct drm_connector *connector;
+ int pp_stat;
+
+ if (!dev_priv->iLVDS_enable) {
+#ifdef CONFIG_X86_MRST
+ intel_scu_ipc_simple_command(IPC_MSG_PANEL_ON_OFF,
+ IPC_CMD_PANEL_ON);
+ /* FIXME: can we avoid this delay ? */
+ msleep(2000); /* wait 2 seconds */
+#endif
+ }
+
+ /* Display arbitration + watermarks */
+ PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
+ PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
+ PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
+ PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
+ PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
+ PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
+ PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
+ PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
+
+ /*make sure VGA plane is off. it initializes to on after reset!*/
+ PSB_WVDC32(0x80000000, VGACNTRL);
+
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+ if (drm_helper_crtc_in_use(crtc))
+ crtc->funcs->restore(crtc);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ connector->funcs->restore(connector);
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ if (dev_priv->iLVDS_enable) {
+ /*shutdown the panel*/
+ PSB_WVDC32(0, PP_CONTROL);
+ do {
+ pp_stat = PSB_RVDC32(PP_STATUS);
+ } while (pp_stat & 0x80000000);
+
+ /* Turn off the plane */
+ PSB_WVDC32(0x58000000, DSPACNTR);
+ PSB_WVDC32(0, DSPASURF);/*trigger the plane disable*/
+ /* Wait ~4 ticks */
+ msleep(4);
+ /* Turn off pipe */
+ PSB_WVDC32(0x0, PIPEACONF);
+ /* Wait ~8 ticks */
+ msleep(8);
+
+ /* Turn off PLLs */
+ PSB_WVDC32(0, MRST_DPLL_A);
+ } else {
+ PSB_WVDC32(DPI_SHUT_DOWN, DPI_CONTROL_REG);
+ PSB_WVDC32(0x0, PIPEACONF);
+ PSB_WVDC32(0x2faf0000, BLC_PWM_CTL);
+ while (REG_READ(0x70008) & 0x40000000)
+ cpu_relax();
+ while ((PSB_RVDC32(GEN_FIFO_STAT_REG) & DPI_FIFO_EMPTY)
+ != DPI_FIFO_EMPTY)
+ cpu_relax();
+ PSB_WVDC32(0, DEVICE_READY_REG);
+ /* Turn off panel power */
+#ifdef CONFIG_X86_MRST /* FIXME: kill define once modular */
+ intel_scu_ipc_simple_command(IPC_MSG_PANEL_ON_OFF,
+ IPC_CMD_PANEL_OFF);
+#endif
+ }
+ return 0;
+}
+
+/**
+ * mrst_power_down - power down the display island
+ * @dev: our DRM device
+ *
+ * Power down the display interface of our device
+ */
+static int mrst_power_down(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 pwr_mask ;
+ u32 pwr_sts;
+
+ pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+ outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
+
+ while (true) {
+ pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+ if ((pwr_sts & pwr_mask) == pwr_mask)
+ break;
+ else
+ udelay(10);
+ }
+ return 0;
+}
+
+/*
+ * mrst_power_up
+ *
+ * Restore power to the specified island(s) (powergating)
+ */
+static int mrst_power_up(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+ u32 pwr_sts, pwr_cnt;
+
+ pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+ pwr_cnt &= ~pwr_mask;
+ outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
+
+ while (true) {
+ pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+ if ((pwr_sts & pwr_mask) == 0)
+ break;
+ else
+ udelay(10);
+ }
+ return 0;
+}
+
+const struct psb_ops mrst_chip_ops = {
+ .output_init = mrst_output_init,
+ .init_pm = mrst_init_pm,
+ .save_regs = mrst_save_display_registers,
+ .restore_regs = mrst_restore_display_registers,
+ .power_down = mrst_power_down,
+ .power_up = mrst_power_up,
+};
+
diff --git a/drivers/staging/gma500/power.c b/drivers/staging/gma500/power.c
new file mode 100644
index 0000000..fc2324e
--- /dev/null
+++ b/drivers/staging/gma500/power.c
@@ -0,0 +1,320 @@
+/**************************************************************************
+ * Copyright (c) 2009-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ * Benjamin Defnet <benjamin.r.defnet@intel.com>
+ * Rajesh Poornachandran <rajesh.poornachandran@intel.com>
+ * Massively reworked
+ * Alan Cox <alan@linux.intel.com>
+ */
+#include "psb_powermgmt.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+
+static struct mutex power_mutex;
+
+/**
+ * gma_power_init - initialise power manager
+ * @dev: our device
+ *
+ * Set up for power management tracking of our hardware.
+ */
+void gma_power_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ /* FIXME: need to sort out fetching apm_reg for both platforms ?? */
+
+ dev_priv->apm_base = dev_priv->apm_reg & 0xffff;
+ dev_priv->ospm_base &= 0xffff;
+
+ dev_priv->display_power = true; /* We start active */
+ dev_priv->display_count = 0; /* Currently no users */
+ dev_priv->suspended = false; /* And not suspended */
+ mutex_init(&power_mutex);
+
+ dev_priv->ops->init_pm(dev);
+}
+
+/**
+ * gma_power_uninit - end power manager
+ * @dev: device to end for
+ *
+ * Undo the effects of gma_power_init
+ */
+void gma_power_uninit(struct drm_device *dev)
+{
+ mutex_destroy(&power_mutex);
+ pm_runtime_disable(&dev->pdev->dev);
+ pm_runtime_set_suspended(&dev->pdev->dev);
+}
+
+
+
+
+/**
+ * gma_suspend_display - suspend the display logic
+ * @dev: our DRM device
+ *
+ * Suspend the display logic of the graphics interface
+ *
+ * FIXME: This ought to be replaced by a dev_priv-> ops interface
+ * where the various platforms register their save/restore methods
+ * and keep them in their own support files.
+ */
+static void gma_suspend_display(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->suspended)
+ return;
+ dev_priv->ops->save_regs(dev);
+ dev_priv->ops->power_down(dev);
+ dev_priv->display_power = false;
+}
+
+/**
+ * gma_resume_display - resume display side logic
+ *
+ * Resume the display hardware restoring state and enabling
+ * as necessary.
+ */
+static void gma_resume_display(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (dev_priv->suspended == false)
+ return;
+
+ /* turn on the display power island */
+ dev_priv->ops->power_up(dev);
+ dev_priv->suspended = false;
+ dev_priv->display_power = true;
+
+ PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
+ pci_write_config_word(pdev, PSB_GMCH_CTRL,
+ dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
+ dev_priv->ops->restore_regs(dev);
+}
+
+/**
+ * gma_suspend_pci - suspend PCI side
+ * @pdev: PCI device
+ *
+ * Perform the suspend processing on our PCI device state
+ */
+static void gma_suspend_pci(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int bsm, vbt;
+
+ if (dev_priv->suspended)
+ return;
+
+ pci_save_state(pdev);
+ pci_read_config_dword(pdev, 0x5C, &bsm);
+ dev_priv->saveBSM = bsm;
+ pci_read_config_dword(pdev, 0xFC, &vbt);
+ dev_priv->saveVBT = vbt;
+ pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr);
+ pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data);
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ dev_priv->suspended = true;
+}
+
+/**
+ * gma_resume_pci - resume helper
+ * @dev: our PCI device
+ *
+ * Perform the resume processing on our PCI device state - rewrite
+ * register state and re-enable the PCI device
+ */
+static bool gma_resume_pci(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int ret;
+
+ if (!dev_priv->suspended)
+ return true;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM);
+ pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT);
+ /* restoring MSI address and data in PCIx space */
+ pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr);
+ pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data);
+ ret = pci_enable_device(pdev);
+
+ if (ret != 0)
+ dev_err(&pdev->dev, "pci_enable failed: %d\n", ret);
+ else
+ dev_priv->suspended = false;
+ return !dev_priv->suspended;
+}
+
+/**
+ * gma_power_suspend - bus callback for suspend
+ * @pdev: our PCI device
+ * @state: suspend type
+ *
+ * Called back by the PCI layer during a suspend of the system. We
+ * perform the necessary shut down steps and save enough state that
+ * we can undo this when resume is called.
+ */
+int gma_power_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ mutex_lock(&power_mutex);
+ if (!dev_priv->suspended) {
+ if (dev_priv->display_count) {
+ mutex_unlock(&power_mutex);
+ return -EBUSY;
+ }
+ psb_irq_uninstall(dev);
+ gma_suspend_display(dev);
+ gma_suspend_pci(pdev);
+ }
+ mutex_unlock(&power_mutex);
+ return 0;
+}
+
+
+/**
+ * gma_power_resume - resume power
+ * @pdev: PCI device
+ *
+ * Resume the PCI side of the graphics and then the displays
+ */
+int gma_power_resume(struct pci_dev *pdev)
+{
+ struct drm_device *dev = pci_get_drvdata(pdev);
+
+ mutex_lock(&power_mutex);
+ gma_resume_pci(pdev);
+ gma_resume_display(pdev);
+ psb_irq_preinstall(dev);
+ psb_irq_postinstall(dev);
+ mutex_unlock(&power_mutex);
+ return 0;
+}
+
+
+
+/**
+ * gma_power_is_on - returne true if power is on
+ * @dev: our DRM device
+ *
+ * Returns true if the display island power is on at this moment
+ */
+bool gma_power_is_on(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ return dev_priv->display_power;
+}
+
+
+/**
+ * gma_power_begin - begin requiring power
+ * @dev: our DRM device
+ * @force_on: true to force power on
+ *
+ * Begin an action that requires the display power island is enabled.
+ * We refcount the islands.
+ *
+ * FIXME: locking
+ */
+bool gma_power_begin(struct drm_device *dev, bool force_on)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int ret;
+
+ /* Power already on ? */
+ if (dev_priv->display_power) {
+ dev_priv->display_count++;
+ pm_runtime_get(&dev->pdev->dev);
+ return true;
+ }
+ if (force_on == false)
+ return false;
+
+ /* Ok power up needed */
+ ret = gma_resume_pci(dev->pdev);
+ if (ret == 0) {
+ psb_irq_preinstall(dev);
+ psb_irq_postinstall(dev);
+ pm_runtime_get(&dev->pdev->dev);
+ dev_priv->display_count++;
+ return true;
+ }
+ return false;
+}
+
+
+/**
+ * gma_power_end - end use of power
+ * @dev: Our DRM device
+ *
+ * Indicate that one of our gma_power_begin() requested periods when
+ * the diplay island power is needed has completed.
+ */
+void gma_power_end(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ dev_priv->display_count--;
+ WARN_ON(dev_priv->display_count < 0);
+ pm_runtime_put(&dev->pdev->dev);
+}
+
+int psb_runtime_suspend(struct device *dev)
+{
+ static pm_message_t dummy;
+ return gma_power_suspend(to_pci_dev(dev), dummy);
+}
+
+int psb_runtime_resume(struct device *dev)
+{
+ return 0;
+}
+
+int psb_runtime_idle(struct device *dev)
+{
+ struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev));
+ struct drm_psb_private *dev_priv = drmdev->dev_private;
+ if (dev_priv->display_count)
+ return 0;
+ else
+ return 1;
+}
+
diff --git a/drivers/staging/gma500/psb_device.c b/drivers/staging/gma500/psb_device.c
new file mode 100644
index 0000000..97e25ab
--- /dev/null
+++ b/drivers/staging/gma500/psb_device.c
@@ -0,0 +1,174 @@
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+
+static int psb_output_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ psb_intel_lvds_init(dev, &dev_priv->mode_dev);
+ psb_intel_sdvo_init(dev, SDVOB);
+ return 0;
+}
+
+/*
+ * Provide the Poulsbo specific chip logic and low level methods
+ */
+
+static void psb_init_pm(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
+ gating &= ~3; /* Disable 2D clock gating */
+ gating |= 1;
+ PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
+ PSB_RSGX32(PSB_CR_CLKGATECTL);
+}
+
+/**
+ * psb_save_display_registers - save registers lost on suspend
+ * @dev: our DRM device
+ *
+ * Save the state we need in order to be able to restore the interface
+ * upon resume from suspend
+ */
+static int psb_save_display_registers(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct drm_connector *connector;
+
+ /* Display arbitration control + watermarks */
+ dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
+ dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
+ dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
+ dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
+ dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
+ dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
+ dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
+ dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+ /* Save crtc and output state */
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ if (drm_helper_crtc_in_use(crtc))
+ crtc->funcs->save(crtc);
+ }
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ connector->funcs->save(connector);
+
+ mutex_unlock(&dev->mode_config.mutex);
+ return 0;
+}
+
+/**
+ * psb_restore_display_registers - restore lost register state
+ * @dev: our DRM device
+ *
+ * Restore register state that was lost during suspend and resume.
+ */
+static int psb_restore_display_registers(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct drm_crtc *crtc;
+ struct drm_connector *connector;
+ int pp_stat;
+
+ /* Display arbitration + watermarks */
+ PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
+ PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
+ PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
+ PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
+ PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
+ PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
+ PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
+ PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
+
+ /*make sure VGA plane is off. it initializes to on after reset!*/
+ PSB_WVDC32(0x80000000, VGACNTRL);
+
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+ if (drm_helper_crtc_in_use(crtc))
+ crtc->funcs->restore(crtc);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ connector->funcs->restore(connector);
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ if (dev_priv->iLVDS_enable) {
+ /*shutdown the panel*/
+ PSB_WVDC32(0, PP_CONTROL);
+ do {
+ pp_stat = PSB_RVDC32(PP_STATUS);
+ } while (pp_stat & 0x80000000);
+
+ /* Turn off the plane */
+ PSB_WVDC32(0x58000000, DSPACNTR);
+ PSB_WVDC32(0, DSPASURF);/*trigger the plane disable*/
+ /* Wait ~4 ticks */
+ msleep(4);
+ /* Turn off pipe */
+ PSB_WVDC32(0x0, PIPEACONF);
+ /* Wait ~8 ticks */
+ msleep(8);
+
+ /* Turn off PLLs */
+ PSB_WVDC32(0, MRST_DPLL_A);
+ } else {
+ PSB_WVDC32(DPI_SHUT_DOWN, DPI_CONTROL_REG);
+ PSB_WVDC32(0x0, PIPEACONF);
+ PSB_WVDC32(0x2faf0000, BLC_PWM_CTL);
+ while (REG_READ(0x70008) & 0x40000000)
+ cpu_relax();
+ while ((PSB_RVDC32(GEN_FIFO_STAT_REG) & DPI_FIFO_EMPTY)
+ != DPI_FIFO_EMPTY)
+ cpu_relax();
+ PSB_WVDC32(0, DEVICE_READY_REG);
+ }
+ return 0;
+}
+
+int psb_power_down(struct drm_device *dev)
+{
+ return 0;
+}
+
+int psb_power_up(struct drm_device *dev)
+{
+ return 0;
+}
+
+const struct psb_ops psb_chip_ops = {
+ .output_init = psb_output_init,
+ .init_pm = psb_init_pm,
+ .save_regs = psb_save_display_registers,
+ .restore_regs = psb_restore_display_registers,
+ .power_down = psb_power_down,
+ .power_up = psb_power_up,
+};
+
diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c
index 0d65f75..6c57234 100644
--- a/drivers/staging/gma500/psb_drv.c
+++ b/drivers/staging/gma500/psb_drv.c
@@ -49,24 +49,24 @@ module_param_named(trap_pagefaults, drm_psb_trap_pagefaults, int, 0600);


static DEFINE_PCI_DEVICE_TABLE(pciidlist) = {
- { 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PSB_8108 },
- { 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PSB_8109 },
- { 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MRST_4100},
- { 0x8086, 0x0130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0133, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0134, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0135, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
- { 0x8086, 0x0137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_MFLD_0130},
+ { 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
+ { 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
+ { 0x8086, 0x4100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4103, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4105, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x4107, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mrst_chip_ops},
+ { 0x8086, 0x0130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0133, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0134, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0135, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
+ { 0x8086, 0x0137, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &mdfld_chip_ops},
{ 0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, pciidlist);
@@ -257,8 +257,7 @@ out_err:

static int psb_driver_unload(struct drm_device *dev)
{
- struct drm_psb_private *dev_priv =
- (struct drm_psb_private *) dev->dev_private;
+ struct drm_psb_private *dev_priv = dev->dev_private;

/* Kill vblank etc here */

@@ -332,6 +331,10 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
if (dev_priv == NULL)
return -ENOMEM;

+ dev_priv->ops = (struct psb_ops *)chipset;
+ dev_priv->dev = dev;
+ dev->dev_private = (void *) dev_priv;
+
if (IS_MRST(dev))
dev_priv->num_pipe = 1;
else if (IS_MFLD(dev))
@@ -339,10 +342,6 @@ static int psb_driver_load(struct drm_device *dev, unsigned long chipset)
else
dev_priv->num_pipe = 2;

- dev_priv->dev = dev;
-
- dev->dev_private = (void *) dev_priv;
- dev_priv->chipset = chipset;

resource_start = pci_resource_start(dev->pdev, PSB_MMIO_RESOURCE);

diff --git a/drivers/staging/gma500/psb_drv.h b/drivers/staging/gma500/psb_drv.h
index 3b2ee08..d1c49e7 100644
--- a/drivers/staging/gma500/psb_drv.h
+++ b/drivers/staging/gma500/psb_drv.h
@@ -258,11 +258,11 @@ struct psb_intel_opregion {
int enabled;
};

+struct psb_ops;

struct drm_psb_private {
struct drm_device *dev;
-
- unsigned long chipset;
+ const struct psb_ops *ops;

struct psb_gtt *pg;

@@ -612,6 +612,23 @@ struct drm_psb_private {
};


+/*
+ * Operations for each board type
+ */
+
+struct psb_ops {
+ /* Display management hooks */
+ int (*output_init)(struct drm_device *dev);
+ /* Power management hooks */
+ void (*init_pm)(struct drm_device *dev);
+ int (*save_regs)(struct drm_device *dev);
+ int (*restore_regs)(struct drm_device *dev);
+ int (*power_up)(struct drm_device *dev);
+ int (*power_down)(struct drm_device *dev);
+};
+
+
+
struct psb_mmu_driver;

extern int drm_crtc_probe_output_modes(struct drm_device *dev, int, int);
@@ -761,6 +778,14 @@ extern int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev,
uint32_t handle, uint64_t *offset);
extern int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);

+/* psb_device.c */
+extern const struct psb_ops psb_chip_ops;
+
+/* mrst_device.c */
+extern const struct psb_ops mrst_chip_ops;
+
+/* mdfld_device.c */
+extern const struct psb_ops mdfld_chip_ops;

/*
* Debug print bits setting
diff --git a/drivers/staging/gma500/psb_fb.c b/drivers/staging/gma500/psb_fb.c
index 83095fc..32d9016 100644
--- a/drivers/staging/gma500/psb_fb.c
+++ b/drivers/staging/gma500/psb_fb.c
@@ -725,17 +725,7 @@ static void psb_setup_outputs(struct drm_device *dev)
drm_mode_create_scaling_mode_property(dev);
psb_create_backlight_property(dev);

- if (IS_MRST(dev)) {
- if (dev_priv->iLVDS_enable)
- mrst_lvds_init(dev, &dev_priv->mode_dev);
- else
- dev_err(dev->dev, "DSI is not supported\n");
- } else if (IS_MFLD(dev)) {
- mdfld_output_init(dev);
- } else {
- psb_intel_lvds_init(dev, &dev_priv->mode_dev);
- psb_intel_sdvo_init(dev, SDVOB);
- }
+ dev_priv->ops->output_init(dev);

list_for_each_entry(connector, &dev->mode_config.connector_list,
head) {
diff --git a/drivers/staging/gma500/psb_powermgmt.c b/drivers/staging/gma500/psb_powermgmt.c
deleted file mode 100644
index 2253ecb..0000000
--- a/drivers/staging/gma500/psb_powermgmt.c
+++ /dev/null
@@ -1,1051 +0,0 @@
-/**************************************************************************
- * Copyright (c) 2009-2011, Intel Corporation.
- * All Rights Reserved.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- *
- * Authors:
- * Benjamin Defnet <benjamin.r.defnet@intel.com>
- * Rajesh Poornachandran <rajesh.poornachandran@intel.com>
- * Massively reworked
- * Alan Cox <alan@linux.intel.com>
- */
-#include "psb_powermgmt.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_output.h"
-#include <linux/mutex.h>
-#include <linux/pm_runtime.h>
-#include <asm/intel_scu_ipc.h>
-
-/* IPC message and command defines used to enable/disable mipi panel voltages */
-#define IPC_MSG_PANEL_ON_OFF 0xE9
-#define IPC_CMD_PANEL_ON 1
-#define IPC_CMD_PANEL_OFF 0
-
-static struct mutex power_mutex;
-
-/**
- * gma_power_init - initialise power manager
- * @dev: our device
- *
- * Set up for power management tracking of our hardware.
- */
-void gma_power_init(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* FIXME: need to sort out fetching apm_reg for both platforms ?? */
-
- dev_priv->apm_base = dev_priv->apm_reg & 0xffff;
- dev_priv->ospm_base &= 0xffff;
-
- dev_priv->display_power = true; /* We start active */
- dev_priv->display_count = 0; /* Currently no users */
- dev_priv->suspended = false; /* And not suspended */
- mutex_init(&power_mutex);
-
- if (!IS_MRST(dev) && !IS_MFLD(dev)) {
- /* FIXME: wants further review */
- u32 gating = PSB_RSGX32(PSB_CR_CLKGATECTL);
- /* Disable 2D clock gating */
- gating &= ~3;
- gating |= 1;
- PSB_WSGX32(gating, PSB_CR_CLKGATECTL);
- PSB_RSGX32(PSB_CR_CLKGATECTL);
- }
-}
-
-/**
- * gma_power_uninit - end power manager
- * @dev: device to end for
- *
- * Undo the effects of gma_power_init
- */
-void gma_power_uninit(struct drm_device *dev)
-{
- mutex_destroy(&power_mutex);
- pm_runtime_disable(&dev->pdev->dev);
- pm_runtime_set_suspended(&dev->pdev->dev);
-}
-
-
-/**
- * save_display_registers - save registers lost on suspend
- * @dev: our DRM device
- *
- * Save the state we need in order to be able to restore the interface
- * upon resume from suspend
- */
-static int save_display_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
- struct drm_connector *connector;
-
- /* Display arbitration control + watermarks */
- dev_priv->saveDSPARB = PSB_RVDC32(DSPARB);
- dev_priv->saveDSPFW1 = PSB_RVDC32(DSPFW1);
- dev_priv->saveDSPFW2 = PSB_RVDC32(DSPFW2);
- dev_priv->saveDSPFW3 = PSB_RVDC32(DSPFW3);
- dev_priv->saveDSPFW4 = PSB_RVDC32(DSPFW4);
- dev_priv->saveDSPFW5 = PSB_RVDC32(DSPFW5);
- dev_priv->saveDSPFW6 = PSB_RVDC32(DSPFW6);
- dev_priv->saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
-
- /* Save crtc and output state */
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- if (drm_helper_crtc_in_use(crtc))
- crtc->funcs->save(crtc);
- }
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
- connector->funcs->save(connector);
-
- mutex_unlock(&dev->mode_config.mutex);
- return 0;
-}
-
-/**
- * restore_display_registers - restore lost register state
- * @dev: our DRM device
- *
- * Restore register state that was lost during suspend and resume.
- */
-static int restore_display_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct drm_crtc *crtc;
- struct drm_connector *connector;
-
- /* Display arbitration + watermarks */
- PSB_WVDC32(dev_priv->saveDSPARB, DSPARB);
- PSB_WVDC32(dev_priv->saveDSPFW1, DSPFW1);
- PSB_WVDC32(dev_priv->saveDSPFW2, DSPFW2);
- PSB_WVDC32(dev_priv->saveDSPFW3, DSPFW3);
- PSB_WVDC32(dev_priv->saveDSPFW4, DSPFW4);
- PSB_WVDC32(dev_priv->saveDSPFW5, DSPFW5);
- PSB_WVDC32(dev_priv->saveDSPFW6, DSPFW6);
- PSB_WVDC32(dev_priv->saveCHICKENBIT, DSPCHICKENBIT);
-
- /*make sure VGA plane is off. it initializes to on after reset!*/
- PSB_WVDC32(0x80000000, VGACNTRL);
-
- mutex_lock(&dev->mode_config.mutex);
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
- if (drm_helper_crtc_in_use(crtc))
- crtc->funcs->restore(crtc);
-
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
- connector->funcs->restore(connector);
-
- mutex_unlock(&dev->mode_config.mutex);
- return 0;
-}
-
-/**
- * mdfld_save_display_registers - save registers for pipe
- * @dev: our device
- * @pipe: pipe to save
- *
- * Save the pipe state of the device before we power it off. Keep everything
- * we need to put it back again
- */
-static int mdfld_save_display_registers(struct drm_device *dev, int pipe)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int i;
-
- /* register */
- u32 dpll_reg = MRST_DPLL_A;
- u32 fp_reg = MRST_FPA0;
- u32 pipeconf_reg = PIPEACONF;
- u32 htot_reg = HTOTAL_A;
- u32 hblank_reg = HBLANK_A;
- u32 hsync_reg = HSYNC_A;
- u32 vtot_reg = VTOTAL_A;
- u32 vblank_reg = VBLANK_A;
- u32 vsync_reg = VSYNC_A;
- u32 pipesrc_reg = PIPEASRC;
- u32 dspstride_reg = DSPASTRIDE;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dsptileoff_reg = DSPATILEOFF;
- u32 dspsize_reg = DSPASIZE;
- u32 dsppos_reg = DSPAPOS;
- u32 dspsurf_reg = DSPASURF;
- u32 mipi_reg = MIPI;
- u32 dspcntr_reg = DSPACNTR;
- u32 dspstatus_reg = PIPEASTAT;
- u32 palette_reg = PALETTE_A;
-
- /* pointer to values */
- u32 *dpll_val = &dev_priv->saveDPLL_A;
- u32 *fp_val = &dev_priv->saveFPA0;
- u32 *pipeconf_val = &dev_priv->savePIPEACONF;
- u32 *htot_val = &dev_priv->saveHTOTAL_A;
- u32 *hblank_val = &dev_priv->saveHBLANK_A;
- u32 *hsync_val = &dev_priv->saveHSYNC_A;
- u32 *vtot_val = &dev_priv->saveVTOTAL_A;
- u32 *vblank_val = &dev_priv->saveVBLANK_A;
- u32 *vsync_val = &dev_priv->saveVSYNC_A;
- u32 *pipesrc_val = &dev_priv->savePIPEASRC;
- u32 *dspstride_val = &dev_priv->saveDSPASTRIDE;
- u32 *dsplinoff_val = &dev_priv->saveDSPALINOFF;
- u32 *dsptileoff_val = &dev_priv->saveDSPATILEOFF;
- u32 *dspsize_val = &dev_priv->saveDSPASIZE;
- u32 *dsppos_val = &dev_priv->saveDSPAPOS;
- u32 *dspsurf_val = &dev_priv->saveDSPASURF;
- u32 *mipi_val = &dev_priv->saveMIPI;
- u32 *dspcntr_val = &dev_priv->saveDSPACNTR;
- u32 *dspstatus_val = &dev_priv->saveDSPASTATUS;
- u32 *palette_val = dev_priv->save_palette_a;
-
- switch (pipe) {
- case 0:
- break;
- case 1:
- /* register */
- dpll_reg = MDFLD_DPLL_B;
- fp_reg = MDFLD_DPLL_DIV0;
- pipeconf_reg = PIPEBCONF;
- htot_reg = HTOTAL_B;
- hblank_reg = HBLANK_B;
- hsync_reg = HSYNC_B;
- vtot_reg = VTOTAL_B;
- vblank_reg = VBLANK_B;
- vsync_reg = VSYNC_B;
- pipesrc_reg = PIPEBSRC;
- dspstride_reg = DSPBSTRIDE;
- dsplinoff_reg = DSPBLINOFF;
- dsptileoff_reg = DSPBTILEOFF;
- dspsize_reg = DSPBSIZE;
- dsppos_reg = DSPBPOS;
- dspsurf_reg = DSPBSURF;
- dspcntr_reg = DSPBCNTR;
- dspstatus_reg = PIPEBSTAT;
- palette_reg = PALETTE_B;
-
- /* values */
- dpll_val = &dev_priv->saveDPLL_B;
- fp_val = &dev_priv->saveFPB0;
- pipeconf_val = &dev_priv->savePIPEBCONF;
- htot_val = &dev_priv->saveHTOTAL_B;
- hblank_val = &dev_priv->saveHBLANK_B;
- hsync_val = &dev_priv->saveHSYNC_B;
- vtot_val = &dev_priv->saveVTOTAL_B;
- vblank_val = &dev_priv->saveVBLANK_B;
- vsync_val = &dev_priv->saveVSYNC_B;
- pipesrc_val = &dev_priv->savePIPEBSRC;
- dspstride_val = &dev_priv->saveDSPBSTRIDE;
- dsplinoff_val = &dev_priv->saveDSPBLINOFF;
- dsptileoff_val = &dev_priv->saveDSPBTILEOFF;
- dspsize_val = &dev_priv->saveDSPBSIZE;
- dsppos_val = &dev_priv->saveDSPBPOS;
- dspsurf_val = &dev_priv->saveDSPBSURF;
- dspcntr_val = &dev_priv->saveDSPBCNTR;
- dspstatus_val = &dev_priv->saveDSPBSTATUS;
- palette_val = dev_priv->save_palette_b;
- break;
- case 2:
- /* register */
- pipeconf_reg = PIPECCONF;
- htot_reg = HTOTAL_C;
- hblank_reg = HBLANK_C;
- hsync_reg = HSYNC_C;
- vtot_reg = VTOTAL_C;
- vblank_reg = VBLANK_C;
- vsync_reg = VSYNC_C;
- pipesrc_reg = PIPECSRC;
- dspstride_reg = DSPCSTRIDE;
- dsplinoff_reg = DSPCLINOFF;
- dsptileoff_reg = DSPCTILEOFF;
- dspsize_reg = DSPCSIZE;
- dsppos_reg = DSPCPOS;
- dspsurf_reg = DSPCSURF;
- mipi_reg = MIPI_C;
- dspcntr_reg = DSPCCNTR;
- dspstatus_reg = PIPECSTAT;
- palette_reg = PALETTE_C;
-
- /* pointer to values */
- pipeconf_val = &dev_priv->savePIPECCONF;
- htot_val = &dev_priv->saveHTOTAL_C;
- hblank_val = &dev_priv->saveHBLANK_C;
- hsync_val = &dev_priv->saveHSYNC_C;
- vtot_val = &dev_priv->saveVTOTAL_C;
- vblank_val = &dev_priv->saveVBLANK_C;
- vsync_val = &dev_priv->saveVSYNC_C;
- pipesrc_val = &dev_priv->savePIPECSRC;
- dspstride_val = &dev_priv->saveDSPCSTRIDE;
- dsplinoff_val = &dev_priv->saveDSPCLINOFF;
- dsptileoff_val = &dev_priv->saveDSPCTILEOFF;
- dspsize_val = &dev_priv->saveDSPCSIZE;
- dsppos_val = &dev_priv->saveDSPCPOS;
- dspsurf_val = &dev_priv->saveDSPCSURF;
- mipi_val = &dev_priv->saveMIPI_C;
- dspcntr_val = &dev_priv->saveDSPCCNTR;
- dspstatus_val = &dev_priv->saveDSPCSTATUS;
- palette_val = dev_priv->save_palette_c;
- break;
- default:
- DRM_ERROR("%s, invalid pipe number.\n", __func__);
- return -EINVAL;
- }
-
- /* Pipe & plane A info */
- *dpll_val = PSB_RVDC32(dpll_reg);
- *fp_val = PSB_RVDC32(fp_reg);
- *pipeconf_val = PSB_RVDC32(pipeconf_reg);
- *htot_val = PSB_RVDC32(htot_reg);
- *hblank_val = PSB_RVDC32(hblank_reg);
- *hsync_val = PSB_RVDC32(hsync_reg);
- *vtot_val = PSB_RVDC32(vtot_reg);
- *vblank_val = PSB_RVDC32(vblank_reg);
- *vsync_val = PSB_RVDC32(vsync_reg);
- *pipesrc_val = PSB_RVDC32(pipesrc_reg);
- *dspstride_val = PSB_RVDC32(dspstride_reg);
- *dsplinoff_val = PSB_RVDC32(dsplinoff_reg);
- *dsptileoff_val = PSB_RVDC32(dsptileoff_reg);
- *dspsize_val = PSB_RVDC32(dspsize_reg);
- *dsppos_val = PSB_RVDC32(dsppos_reg);
- *dspsurf_val = PSB_RVDC32(dspsurf_reg);
- *dspcntr_val = PSB_RVDC32(dspcntr_reg);
- *dspstatus_val = PSB_RVDC32(dspstatus_reg);
-
- /*save palette (gamma) */
- for (i = 0; i < 256; i++)
- palette_val[i] = PSB_RVDC32(palette_reg + (i<<2));
-
- if (pipe == 1) {
- dev_priv->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
- dev_priv->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL);
- dev_priv->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL);
- return 0;
- }
- *mipi_val = PSB_RVDC32(mipi_reg);
- return 0;
-}
-
-/**
- * mdfld_save_cursor_overlay_registers - save cursor overlay info
- * @dev: our device
- *
- * Save the cursor and overlay register state
- */
-static int mdfld_save_cursor_overlay_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* Save cursor regs */
- dev_priv->saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
- dev_priv->saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
- dev_priv->saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
-
- dev_priv->saveDSPBCURSOR_CTRL = PSB_RVDC32(CURBCNTR);
- dev_priv->saveDSPBCURSOR_BASE = PSB_RVDC32(CURBBASE);
- dev_priv->saveDSPBCURSOR_POS = PSB_RVDC32(CURBPOS);
-
- dev_priv->saveDSPCCURSOR_CTRL = PSB_RVDC32(CURCCNTR);
- dev_priv->saveDSPCCURSOR_BASE = PSB_RVDC32(CURCBASE);
- dev_priv->saveDSPCCURSOR_POS = PSB_RVDC32(CURCPOS);
-
- /* HW overlay */
- dev_priv->saveOV_OVADD = PSB_RVDC32(OV_OVADD);
- dev_priv->saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
- dev_priv->saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
- dev_priv->saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
- dev_priv->saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
- dev_priv->saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
- dev_priv->saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
-
- dev_priv->saveOV_OVADD_C = PSB_RVDC32(OV_OVADD + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC0_C = PSB_RVDC32(OV_OGAMC0 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC1_C = PSB_RVDC32(OV_OGAMC1 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC2_C = PSB_RVDC32(OV_OGAMC2 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC3_C = PSB_RVDC32(OV_OGAMC3 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC4_C = PSB_RVDC32(OV_OGAMC4 + OV_C_OFFSET);
- dev_priv->saveOV_OGAMC5_C = PSB_RVDC32(OV_OGAMC5 + OV_C_OFFSET);
-
- return 0;
-}
-/*
- * mdfld_restore_display_registers - restore the state of a pipe
- * @dev: our device
- * @pipe: the pipe to restore
- *
- * Restore the state of a pipe to that which was saved by the register save
- * functions.
- */
-static int mdfld_restore_display_registers(struct drm_device *dev, int pipe)
-{
- /* To get panel out of ULPS mode */
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct mdfld_dsi_config *dsi_config = NULL;
- u32 i = 0;
- u32 dpll = 0;
- u32 timeout = 0;
- u32 reg_offset = 0;
-
- /* register */
- u32 dpll_reg = MRST_DPLL_A;
- u32 fp_reg = MRST_FPA0;
- u32 pipeconf_reg = PIPEACONF;
- u32 htot_reg = HTOTAL_A;
- u32 hblank_reg = HBLANK_A;
- u32 hsync_reg = HSYNC_A;
- u32 vtot_reg = VTOTAL_A;
- u32 vblank_reg = VBLANK_A;
- u32 vsync_reg = VSYNC_A;
- u32 pipesrc_reg = PIPEASRC;
- u32 dspstride_reg = DSPASTRIDE;
- u32 dsplinoff_reg = DSPALINOFF;
- u32 dsptileoff_reg = DSPATILEOFF;
- u32 dspsize_reg = DSPASIZE;
- u32 dsppos_reg = DSPAPOS;
- u32 dspsurf_reg = DSPASURF;
- u32 dspstatus_reg = PIPEASTAT;
- u32 mipi_reg = MIPI;
- u32 dspcntr_reg = DSPACNTR;
- u32 palette_reg = PALETTE_A;
-
- /* values */
- u32 dpll_val = dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE;
- u32 fp_val = dev_priv->saveFPA0;
- u32 pipeconf_val = dev_priv->savePIPEACONF;
- u32 htot_val = dev_priv->saveHTOTAL_A;
- u32 hblank_val = dev_priv->saveHBLANK_A;
- u32 hsync_val = dev_priv->saveHSYNC_A;
- u32 vtot_val = dev_priv->saveVTOTAL_A;
- u32 vblank_val = dev_priv->saveVBLANK_A;
- u32 vsync_val = dev_priv->saveVSYNC_A;
- u32 pipesrc_val = dev_priv->savePIPEASRC;
- u32 dspstride_val = dev_priv->saveDSPASTRIDE;
- u32 dsplinoff_val = dev_priv->saveDSPALINOFF;
- u32 dsptileoff_val = dev_priv->saveDSPATILEOFF;
- u32 dspsize_val = dev_priv->saveDSPASIZE;
- u32 dsppos_val = dev_priv->saveDSPAPOS;
- u32 dspsurf_val = dev_priv->saveDSPASURF;
- u32 dspstatus_val = dev_priv->saveDSPASTATUS;
- u32 mipi_val = dev_priv->saveMIPI;
- u32 dspcntr_val = dev_priv->saveDSPACNTR;
- u32 *palette_val = dev_priv->save_palette_a;
-
- switch (pipe) {
- case 0:
- dsi_config = dev_priv->dsi_configs[0];
- break;
- case 1:
- /* register */
- dpll_reg = MDFLD_DPLL_B;
- fp_reg = MDFLD_DPLL_DIV0;
- pipeconf_reg = PIPEBCONF;
- htot_reg = HTOTAL_B;
- hblank_reg = HBLANK_B;
- hsync_reg = HSYNC_B;
- vtot_reg = VTOTAL_B;
- vblank_reg = VBLANK_B;
- vsync_reg = VSYNC_B;
- pipesrc_reg = PIPEBSRC;
- dspstride_reg = DSPBSTRIDE;
- dsplinoff_reg = DSPBLINOFF;
- dsptileoff_reg = DSPBTILEOFF;
- dspsize_reg = DSPBSIZE;
- dsppos_reg = DSPBPOS;
- dspsurf_reg = DSPBSURF;
- dspcntr_reg = DSPBCNTR;
- palette_reg = PALETTE_B;
- dspstatus_reg = PIPEBSTAT;
-
- /* values */
- dpll_val = dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE;
- fp_val = dev_priv->saveFPB0;
- pipeconf_val = dev_priv->savePIPEBCONF;
- htot_val = dev_priv->saveHTOTAL_B;
- hblank_val = dev_priv->saveHBLANK_B;
- hsync_val = dev_priv->saveHSYNC_B;
- vtot_val = dev_priv->saveVTOTAL_B;
- vblank_val = dev_priv->saveVBLANK_B;
- vsync_val = dev_priv->saveVSYNC_B;
- pipesrc_val = dev_priv->savePIPEBSRC;
- dspstride_val = dev_priv->saveDSPBSTRIDE;
- dsplinoff_val = dev_priv->saveDSPBLINOFF;
- dsptileoff_val = dev_priv->saveDSPBTILEOFF;
- dspsize_val = dev_priv->saveDSPBSIZE;
- dsppos_val = dev_priv->saveDSPBPOS;
- dspsurf_val = dev_priv->saveDSPBSURF;
- dspcntr_val = dev_priv->saveDSPBCNTR;
- dspstatus_val = dev_priv->saveDSPBSTATUS;
- palette_val = dev_priv->save_palette_b;
- break;
- case 2:
- reg_offset = MIPIC_REG_OFFSET;
-
- /* register */
- pipeconf_reg = PIPECCONF;
- htot_reg = HTOTAL_C;
- hblank_reg = HBLANK_C;
- hsync_reg = HSYNC_C;
- vtot_reg = VTOTAL_C;
- vblank_reg = VBLANK_C;
- vsync_reg = VSYNC_C;
- pipesrc_reg = PIPECSRC;
- dspstride_reg = DSPCSTRIDE;
- dsplinoff_reg = DSPCLINOFF;
- dsptileoff_reg = DSPCTILEOFF;
- dspsize_reg = DSPCSIZE;
- dsppos_reg = DSPCPOS;
- dspsurf_reg = DSPCSURF;
- mipi_reg = MIPI_C;
- dspcntr_reg = DSPCCNTR;
- palette_reg = PALETTE_C;
- dspstatus_reg = PIPECSTAT;
-
- /* values */
- pipeconf_val = dev_priv->savePIPECCONF;
- htot_val = dev_priv->saveHTOTAL_C;
- hblank_val = dev_priv->saveHBLANK_C;
- hsync_val = dev_priv->saveHSYNC_C;
- vtot_val = dev_priv->saveVTOTAL_C;
- vblank_val = dev_priv->saveVBLANK_C;
- vsync_val = dev_priv->saveVSYNC_C;
- pipesrc_val = dev_priv->savePIPECSRC;
- dspstride_val = dev_priv->saveDSPCSTRIDE;
- dsplinoff_val = dev_priv->saveDSPCLINOFF;
- dsptileoff_val = dev_priv->saveDSPCTILEOFF;
- dspsize_val = dev_priv->saveDSPCSIZE;
- dsppos_val = dev_priv->saveDSPCPOS;
- dspsurf_val = dev_priv->saveDSPCSURF;
- dspstatus_val = dev_priv->saveDSPCSTATUS;
- mipi_val = dev_priv->saveMIPI_C;
- dspcntr_val = dev_priv->saveDSPCCNTR;
- palette_val = dev_priv->save_palette_c;
-
- dsi_config = dev_priv->dsi_configs[1];
- break;
- default:
- DRM_ERROR("%s, invalid pipe number.\n", __func__);
- return -EINVAL;
- }
-
- /* Make sure VGA plane is off. it initializes to on after reset!*/
- PSB_WVDC32(0x80000000, VGACNTRL);
- if (pipe == 1) {
- PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, dpll_reg);
- PSB_RVDC32(dpll_reg);
-
- PSB_WVDC32(fp_val, fp_reg);
- } else {
- dpll = PSB_RVDC32(dpll_reg);
-
- if (!(dpll & DPLL_VCO_ENABLE)) {
-
- /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */
- if (dpll & MDFLD_PWR_GATE_EN) {
- dpll &= ~MDFLD_PWR_GATE_EN;
- PSB_WVDC32(dpll, dpll_reg);
- udelay(500); /* FIXME: 1 ? */
- }
-
- PSB_WVDC32(fp_val, fp_reg);
- PSB_WVDC32(dpll_val, dpll_reg);
- /* FIXME_MDFLD PO - change 500 to 1 after PO */
- udelay(500);
-
- dpll_val |= DPLL_VCO_ENABLE;
- PSB_WVDC32(dpll_val, dpll_reg);
- PSB_RVDC32(dpll_reg);
-
- /* wait for DSI PLL to lock */
- while ((timeout < 20000) && !(PSB_RVDC32(pipeconf_reg) & PIPECONF_DSIPLL_LOCK)) {
- udelay(150);
- timeout++;
- }
-
- if (timeout == 20000) {
- DRM_ERROR("%s, can't lock DSIPLL.\n",
- __func__);
- return -EINVAL;
- }
- }
- }
- /* Restore mode */
- PSB_WVDC32(htot_val, htot_reg);
- PSB_WVDC32(hblank_val, hblank_reg);
- PSB_WVDC32(hsync_val, hsync_reg);
- PSB_WVDC32(vtot_val, vtot_reg);
- PSB_WVDC32(vblank_val, vblank_reg);
- PSB_WVDC32(vsync_val, vsync_reg);
- PSB_WVDC32(pipesrc_val, pipesrc_reg);
- PSB_WVDC32(dspstatus_val, dspstatus_reg);
-
- /* Set up the plane */
- PSB_WVDC32(dspstride_val, dspstride_reg);
- PSB_WVDC32(dsplinoff_val, dsplinoff_reg);
- PSB_WVDC32(dsptileoff_val, dsptileoff_reg);
- PSB_WVDC32(dspsize_val, dspsize_reg);
- PSB_WVDC32(dsppos_val, dsppos_reg);
- PSB_WVDC32(dspsurf_val, dspsurf_reg);
-
- if (pipe == 1) {
- PSB_WVDC32(dev_priv->savePFIT_CONTROL, PFIT_CONTROL);
- PSB_WVDC32(dev_priv->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
- PSB_WVDC32(dev_priv->saveHDMIPHYMISCCTL, HDMIPHYMISCCTL);
- PSB_WVDC32(dev_priv->saveHDMIB_CONTROL, HDMIB_CONTROL);
-
- } else {
- /* Set up pipe related registers */
- PSB_WVDC32(mipi_val, mipi_reg);
- /* Setup MIPI adapter + MIPI IP registers */
- mdfld_dsi_controller_init(dsi_config, pipe);
- msleep(20);
- }
- /* Enable the plane */
- PSB_WVDC32(dspcntr_val, dspcntr_reg);
- msleep(20);
- /* Enable the pipe */
- PSB_WVDC32(pipeconf_val, pipeconf_reg);
-
- for (i = 0; i < 256; i++)
- PSB_WVDC32(palette_val[i], palette_reg + (i<<2));
- if (pipe == 1)
- return 0;
- if (IS_MFLD(dev) && !mdfld_panel_dpi(dev))
- mdfld_enable_te(dev, pipe);
- return 0;
-}
-
-/**
- * mdfld_restore_cursor_overlay_registers - restore cursor
- * @dev: our device
- *
- * Restore the cursor and overlay state that was saved earlier
- */
-static int mdfld_restore_cursor_overlay_registers(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- /* Enable Cursor A */
- PSB_WVDC32(dev_priv->saveDSPACURSOR_CTRL, CURACNTR);
- PSB_WVDC32(dev_priv->saveDSPACURSOR_POS, CURAPOS);
- PSB_WVDC32(dev_priv->saveDSPACURSOR_BASE, CURABASE);
-
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_CTRL, CURBCNTR);
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_POS, CURBPOS);
- PSB_WVDC32(dev_priv->saveDSPBCURSOR_BASE, CURBBASE);
-
- PSB_WVDC32(dev_priv->saveDSPCCURSOR_CTRL, CURCCNTR);
- PSB_WVDC32(dev_priv->saveDSPCCURSOR_POS, CURCPOS);
- PSB_WVDC32(dev_priv->saveDSPCCURSOR_BASE, CURCBASE);
-
- /* Restore HW overlay */
- PSB_WVDC32(dev_priv->saveOV_OVADD, OV_OVADD);
- PSB_WVDC32(dev_priv->saveOV_OGAMC0, OV_OGAMC0);
- PSB_WVDC32(dev_priv->saveOV_OGAMC1, OV_OGAMC1);
- PSB_WVDC32(dev_priv->saveOV_OGAMC2, OV_OGAMC2);
- PSB_WVDC32(dev_priv->saveOV_OGAMC3, OV_OGAMC3);
- PSB_WVDC32(dev_priv->saveOV_OGAMC4, OV_OGAMC4);
- PSB_WVDC32(dev_priv->saveOV_OGAMC5, OV_OGAMC5);
-
- PSB_WVDC32(dev_priv->saveOV_OVADD_C, OV_OVADD + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC0_C, OV_OGAMC0 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC1_C, OV_OGAMC1 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC2_C, OV_OGAMC2 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC3_C, OV_OGAMC3 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC4_C, OV_OGAMC4 + OV_C_OFFSET);
- PSB_WVDC32(dev_priv->saveOV_OGAMC5_C, OV_OGAMC5 + OV_C_OFFSET);
-
- return 0;
-}
-
-/**
- * power_down - power down the display island
- * @dev: our DRM device
- *
- * Power down the display interface of our device
- */
-static void power_down(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pwr_mask ;
- u32 pwr_sts;
-
- if (IS_MRST(dev)) {
- pwr_mask = PSB_PWRGT_DISPLAY_MASK;
- outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
-
- while (true) {
- pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
- if ((pwr_sts & pwr_mask) == pwr_mask)
- break;
- else
- udelay(10);
- }
- dev_priv->display_power = false;
- }
-}
-
-
-/**
- * gma_suspend_display - suspend the display logic
- * @dev: our DRM device
- *
- * Suspend the display logic of the graphics interface
- *
- * FIXME: This ought to be replaced by a dev_priv-> ops interface
- * where the various platforms register their save/restore methods
- * and keep them in their own support files.
- */
-static void gma_suspend_display(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int pp_stat;
-
- if (dev_priv->suspended)
- return;
-
- if (IS_MFLD(dev)) {
- /* FIXME: We need to shut down panels here if using them
- and once the right bits are merged */
- mdfld_save_cursor_overlay_registers(dev);
- mdfld_save_display_registers(dev, 0);
- mdfld_save_display_registers(dev, 0);
- mdfld_save_display_registers(dev, 2);
- mdfld_save_display_registers(dev, 1);
- mdfld_disable_crtc(dev, 0);
- mdfld_disable_crtc(dev, 2);
- mdfld_disable_crtc(dev, 1);
- } else {
- save_display_registers(dev);
-
- if (dev_priv->iLVDS_enable) {
- /*shutdown the panel*/
- PSB_WVDC32(0, PP_CONTROL);
-
- do {
- pp_stat = PSB_RVDC32(PP_STATUS);
- } while (pp_stat & 0x80000000);
-
- /* Turn off the plane */
- PSB_WVDC32(0x58000000, DSPACNTR);
- PSB_WVDC32(0, DSPASURF);/*trigger the plane disable*/
- /* Wait ~4 ticks */
- msleep(4);
-
- /* Turn off pipe */
- PSB_WVDC32(0x0, PIPEACONF);
- /* Wait ~8 ticks */
- msleep(8);
-
- /* Turn off PLLs */
- PSB_WVDC32(0, MRST_DPLL_A);
- } else {
- PSB_WVDC32(DPI_SHUT_DOWN, DPI_CONTROL_REG);
- PSB_WVDC32(0x0, PIPEACONF);
- PSB_WVDC32(0x2faf0000, BLC_PWM_CTL);
- while (REG_READ(0x70008) & 0x40000000)
- cpu_relax();
- while ((PSB_RVDC32(GEN_FIFO_STAT_REG) & DPI_FIFO_EMPTY)
- != DPI_FIFO_EMPTY)
- cpu_relax();
- PSB_WVDC32(0, DEVICE_READY_REG);
- /* Turn off panel power */
-#ifdef CONFIG_X86_MRST
- intel_scu_ipc_simple_command(IPC_MSG_PANEL_ON_OFF,
- IPC_CMD_PANEL_OFF);
-#endif
- }
- }
- power_down(dev);
-}
-
-/*
- * power_up
- *
- * Description: Restore power to the specified island(s) (powergating)
- */
-static void power_up(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
- u32 pwr_sts, pwr_cnt;
-
- if (IS_MRST(dev)) {
- pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
- pwr_cnt &= ~pwr_mask;
- outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
-
- while (true) {
- pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
- if ((pwr_sts & pwr_mask) == 0)
- break;
- else
- udelay(10);
- }
- }
- dev_priv->suspended = false;
- dev_priv->display_power = true;
-}
-
-/**
- * gma_resume_display - resume display side logic
- *
- * Resume the display hardware restoring state and enabling
- * as necessary.
- */
-static void gma_resume_display(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- if (dev_priv->suspended == false)
- return;
-
- /* turn on the display power island */
- power_up(dev);
-
- PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
- pci_write_config_word(pdev, PSB_GMCH_CTRL,
- dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
-
- /* Don't reinitialize the GTT as it is unnecessary. The gtt is
- * stored in memory so it will automatically be restored. All
- * we need to do is restore the PGETBL_CTL which we already do
- * above.
- */
- /*psb_gtt_init(dev_priv->pg, 1);*/
- if (IS_MFLD(dev)) {
- mdfld_restore_display_registers(dev, 1);
- mdfld_restore_display_registers(dev, 0);
- mdfld_restore_display_registers(dev, 2);
- mdfld_restore_cursor_overlay_registers(dev);
- } else if (IS_MRST(dev)) {
- if (!dev_priv->iLVDS_enable) {
-#ifdef CONFIG_X86_MRST
- intel_scu_ipc_simple_command(IPC_MSG_PANEL_ON_OFF,
- IPC_CMD_PANEL_ON);
- /* FIXME: can we avoid this delay ? */
- msleep(2000); /* wait 2 seconds */
-#endif
- }
- }
- restore_display_registers(dev);
-}
-
-/**
- * gma_suspend_pci - suspend PCI side
- * @pdev: PCI device
- *
- * Perform the suspend processing on our PCI device state
- */
-static void gma_suspend_pci(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int bsm, vbt;
-
- if (dev_priv->suspended)
- return;
-
- pci_save_state(pdev);
- pci_read_config_dword(pdev, 0x5C, &bsm);
- dev_priv->saveBSM = bsm;
- pci_read_config_dword(pdev, 0xFC, &vbt);
- dev_priv->saveVBT = vbt;
- pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr);
- pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data);
-
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- dev_priv->suspended = true;
-}
-
-/**
- * gma_resume_pci - resume helper
- * @dev: our PCI device
- *
- * Perform the resume processing on our PCI device state - rewrite
- * register state and re-enable the PCI device
- */
-static bool gma_resume_pci(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
-
- if (!dev_priv->suspended)
- return true;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_write_config_dword(pdev, 0x5c, dev_priv->saveBSM);
- pci_write_config_dword(pdev, 0xFC, dev_priv->saveVBT);
- /* retoring MSI address and data in PCIx space */
- pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr);
- pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data);
- ret = pci_enable_device(pdev);
-
- if (ret != 0)
- dev_err(&pdev->dev, "pci_enable failed: %d\n", ret);
- else
- dev_priv->suspended = false;
- return !dev_priv->suspended;
-}
-
-/**
- * gma_power_suspend - bus callback for suspend
- * @pdev: our PCI device
- * @state: suspend type
- *
- * Called back by the PCI layer during a suspend of the system. We
- * perform the necessary shut down steps and save enough state that
- * we can undo this when resume is called.
- */
-int gma_power_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
- struct drm_psb_private *dev_priv = dev->dev_private;
-
- mutex_lock(&power_mutex);
- if (!dev_priv->suspended) {
- if (dev_priv->display_count) {
- mutex_unlock(&power_mutex);
- return -EBUSY;
- }
- psb_irq_uninstall(dev);
- gma_suspend_display(dev);
- gma_suspend_pci(pdev);
- }
- mutex_unlock(&power_mutex);
- return 0;
-}
-
-
-/**
- * gma_power_resume - resume power
- * @pdev: PCI device
- *
- * Resume the PCI side of the graphics and then the displays
- */
-int gma_power_resume(struct pci_dev *pdev)
-{
- struct drm_device *dev = pci_get_drvdata(pdev);
-
- mutex_lock(&power_mutex);
- gma_resume_pci(pdev);
- gma_resume_display(pdev);
- psb_irq_preinstall(dev);
- psb_irq_postinstall(dev);
- mutex_unlock(&power_mutex);
- return 0;
-}
-
-
-
-/**
- * gma_power_is_on - returne true if power is on
- * @dev: our DRM device
- *
- * Returns true if the display island power is on at this moment
- */
-bool gma_power_is_on(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- return dev_priv->display_power;
-}
-
-
-/**
- * gma_power_begin - begin requiring power
- * @dev: our DRM device
- * @force_on: true to force power on
- *
- * Begin an action that requires the display power island is enabled.
- * We refcount the islands.
- *
- * FIXME: locking
- */
-bool gma_power_begin(struct drm_device *dev, bool force_on)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- int ret;
-
- /* Power already on ? */
- if (dev_priv->display_power) {
- dev_priv->display_count++;
- pm_runtime_get(&dev->pdev->dev);
- return true;
- }
- if (force_on == false)
- return false;
-
- /* Ok power up needed */
- ret = gma_resume_pci(dev->pdev);
- if (ret == 0) {
- psb_irq_preinstall(dev);
- psb_irq_postinstall(dev);
- pm_runtime_get(&dev->pdev->dev);
- dev_priv->display_count++;
- return true;
- }
- return false;
-}
-
-
-/**
- * gma_power_end - end use of power
- * @dev: Our DRM device
- *
- * Indicate that one of our gma_power_begin() requested periods when
- * the diplay island power is needed has completed.
- */
-void gma_power_end(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- dev_priv->display_count--;
- WARN_ON(dev_priv->display_count < 0);
- pm_runtime_put(&dev->pdev->dev);
-}
-
-int psb_runtime_suspend(struct device *dev)
-{
- static pm_message_t dummy;
- return gma_power_suspend(to_pci_dev(dev), dummy);
-}
-
-int psb_runtime_resume(struct device *dev)
-{
- return 0;
-}
-
-int psb_runtime_idle(struct device *dev)
-{
- struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev));
- struct drm_psb_private *dev_priv = drmdev->dev_private;
- if (dev_priv->display_count)
- return 0;
- else
- return 1;
-}
-


\
 
 \ /
  Last update: 2011-06-29 00:13    [W:0.288 / U:31.848 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site