lkml.org 
[lkml]   [2011]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: coretemp: Support for Intel Atom E6XX CPU (TunnelCreek)?
On Mon, Jun 27, 2011 at 06:20:51AM -0400, Alexander Stein wrote:
> Hello,
>
> I have a patch (for v2.6.39) which adds support for Intel Atom E6XX
> (TunnelCreek) to coretemp. It's merely only adding x86_model 0x26.
> But there are models (e.g. E660 and E660T) with different TjMax, namely 90
> degrees C and 110 degrees C. But these different model can't be detected by
> reading from hardware.
> IMO there should be some support to adjust the temperature from userspace.
> Reading Documentation/hwmon/sysfs-interface only temp1_offset seems to be
> useable. But I think it is somewhat misleading (especially on multicores),
> because there must only be one offset.
> What do you think about this?
>
You can adjust the reported temperature with an entry in sensors3.conf.

Guenter


\
 
 \ /
  Last update: 2011-06-27 15:45    [W:0.070 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site