lkml.org 
[lkml]   [2011]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 8/8] wan: Update to current logging forms
Date
Use pr_fmt, pr_<level> and netdev_<level> as appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/wan/hostess_sv11.c | 11 +++---
drivers/net/wan/lapbether.c | 18 +++++-----
drivers/net/wan/pc300_drv.c | 4 ++-
drivers/net/wan/sbni.c | 67 +++++++++++++++++++---------------------
drivers/net/wan/sealevel.c | 11 +++---
drivers/net/wan/x25_asy.c | 47 ++++++++++++++--------------
drivers/net/wan/z85230.c | 34 ++++++++++----------
7 files changed, 96 insertions(+), 96 deletions(-)
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index e817583..3d80e42 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -20,6 +20,8 @@
* Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -192,8 +194,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
*/

if (!request_region(iobase, 8, "Comtrol SV11")) {
- printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n",
- iobase);
+ pr_warn("I/O 0x%X already in use\n", iobase);
return NULL;
}

@@ -221,7 +222,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)

if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
"Hostess SV11", sv) < 0) {
- printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
+ pr_warn("IRQ %d already in use\n", irq);
goto err_irq;
}

@@ -255,7 +256,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
*/

if (z8530_init(sv)) {
- printk(KERN_ERR "Z8530 series device not found.\n");
+ pr_err("Z8530 series device not found\n");
enable_irq(irq);
goto free_dma;
}
@@ -282,7 +283,7 @@ static struct z8530_dev *sv11_init(int iobase, int irq)
netdev->irq = irq;

if (register_hdlc_device(netdev)) {
- printk(KERN_ERR "hostess: unable to register HDLC device.\n");
+ pr_err("unable to register HDLC device\n");
free_netdev(netdev);
goto free_dma;
}
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index eec463f..a817081 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -20,6 +20,8 @@
* 2000-11-14 Henner Eisen dev_hold/put, NETDEV_GOING_DOWN support
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
@@ -165,13 +167,11 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
break;
case X25_IFACE_CONNECT:
if ((err = lapb_connect_request(dev)) != LAPB_OK)
- printk(KERN_ERR "lapbeth: lapb_connect_request "
- "error: %d\n", err);
+ pr_err("lapb_connect_request error: %d\n", err);
goto drop;
case X25_IFACE_DISCONNECT:
if ((err = lapb_disconnect_request(dev)) != LAPB_OK)
- printk(KERN_ERR "lapbeth: lapb_disconnect_request "
- "err: %d\n", err);
+ pr_err("lapb_disconnect_request err: %d\n", err);
/* Fall thru */
default:
goto drop;
@@ -180,7 +180,7 @@ static netdev_tx_t lapbeth_xmit(struct sk_buff *skb,
skb_pull(skb, 1);

if ((err = lapb_data_request(dev, skb)) != LAPB_OK) {
- printk(KERN_ERR "lapbeth: lapb_data_request error - %d\n", err);
+ pr_err("lapb_data_request error - %d\n", err);
goto drop;
}
out:
@@ -220,7 +220,7 @@ static void lapbeth_connected(struct net_device *dev, int reason)
struct sk_buff *skb = dev_alloc_skb(1);

if (!skb) {
- printk(KERN_ERR "lapbeth: out of memory\n");
+ pr_err("out of memory\n");
return;
}

@@ -237,7 +237,7 @@ static void lapbeth_disconnected(struct net_device *dev, int reason)
struct sk_buff *skb = dev_alloc_skb(1);

if (!skb) {
- printk(KERN_ERR "lapbeth: out of memory\n");
+ pr_err("out of memory\n");
return;
}

@@ -277,7 +277,7 @@ static int lapbeth_open(struct net_device *dev)
int err;

if ((err = lapb_register(dev, &lapbeth_callbacks)) != LAPB_OK) {
- printk(KERN_ERR "lapbeth: lapb_register error - %d\n", err);
+ pr_err("lapb_register error: %d\n", err);
return -ENODEV;
}

@@ -292,7 +292,7 @@ static int lapbeth_close(struct net_device *dev)
netif_stop_queue(dev);

if ((err = lapb_unregister(dev)) != LAPB_OK)
- printk(KERN_ERR "lapbeth: lapb_unregister error - %d\n", err);
+ pr_err("lapb_unregister error: %d\n", err);

return 0;
}
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 9617d3d..1eeedd6 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -212,6 +212,8 @@ static const char rcsid[] =
*
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -3242,7 +3244,7 @@ static inline void show_version(void)
rcsdate++;
tmp = strrchr(rcsdate, ' ');
*tmp = '\0';
- printk(KERN_INFO "Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate);
+ pr_info("Cyclades-PC300 driver %s %s\n", rcsvers, rcsdate);
} /* show_version */

static const struct net_device_ops cpc_netdev_ops = {
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index cff13a9..40e95fa 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -37,6 +37,8 @@
* Known problem: this driver wasn't tested on multiprocessor machine.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
@@ -200,8 +202,8 @@ sbni_isa_probe( struct net_device *dev )

return 0;
else {
- printk( KERN_ERR "sbni: base address 0x%lx is busy, or adapter "
- "is malfunctional!\n", dev->base_addr );
+ pr_err("base address 0x%lx is busy, or adapter is malfunctional!\n",
+ dev->base_addr);
return -ENODEV;
}
}
@@ -226,7 +228,6 @@ static void __init sbni_devsetup(struct net_device *dev)
int __init sbni_probe(int unit)
{
struct net_device *dev;
- static unsigned version_printed __initdata = 0;
int err;

dev = alloc_netdev(sizeof(struct net_local), "sbni", sbni_devsetup);
@@ -250,8 +251,7 @@ int __init sbni_probe(int unit)
free_netdev(dev);
return err;
}
- if( version_printed++ == 0 )
- printk( KERN_INFO "%s", version );
+ pr_info_once("%s", version);
return 0;
}

@@ -326,9 +326,9 @@ sbni_pci_probe( struct net_device *dev )
}

if (pci_irq_line <= 0 || pci_irq_line >= nr_irqs)
- printk( KERN_WARNING
- " WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
- " You should use the PCI BIOS setup to assign a valid IRQ line.\n",
+ pr_warn(
+"WARNING: The PCI BIOS assigned this PCI card to IRQ %d, which is unlikely to work!.\n"
+"You should use the PCI BIOS setup to assign a valid IRQ line.\n",
pci_irq_line );

/* avoiding re-enable dual adapters */
@@ -372,8 +372,7 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq )
outb( 0, ioaddr + CSR0 );

if( !irq ) {
- printk( KERN_ERR "%s: can't detect device irq!\n",
- dev->name );
+ pr_err("%s: can't detect device irq!\n", dev->name);
release_region( ioaddr, SBNI_IO_EXTENT );
return NULL;
}
@@ -386,7 +385,7 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq )
/* Fill in sbni-specific dev fields. */
nl = netdev_priv(dev);
if( !nl ) {
- printk( KERN_ERR "%s: unable to get memory!\n", dev->name );
+ pr_err("%s: unable to get memory!\n", dev->name);
release_region( ioaddr, SBNI_IO_EXTENT );
return NULL;
}
@@ -415,21 +414,21 @@ sbni_probe1( struct net_device *dev, unsigned long ioaddr, int irq )
if( inb( ioaddr + CSR0 ) & 0x01 )
nl->state |= FL_SLOW_MODE;

- printk( KERN_NOTICE "%s: ioaddr %#lx, irq %d, "
- "MAC: 00:ff:01:%02x:%02x:%02x\n",
- dev->name, dev->base_addr, dev->irq,
- ((u8 *) dev->dev_addr) [3],
- ((u8 *) dev->dev_addr) [4],
- ((u8 *) dev->dev_addr) [5] );
+ pr_notice("%s: ioaddr %#lx, irq %d, MAC: 00:ff:01:%02x:%02x:%02x\n",
+ dev->name, dev->base_addr, dev->irq,
+ ((u8 *)dev->dev_addr)[3],
+ ((u8 *)dev->dev_addr)[4],
+ ((u8 *)dev->dev_addr)[5]);

- printk( KERN_NOTICE "%s: speed %d, receive level ", dev->name,
- ( (nl->state & FL_SLOW_MODE) ? 500000 : 2000000)
- / (1 << nl->csr1.rate) );
+ pr_notice("%s: speed %d",
+ dev->name,
+ ((nl->state & FL_SLOW_MODE) ? 500000 : 2000000)
+ / (1 << nl->csr1.rate));

if( nl->delta_rxl == 0 )
- printk( "0x%x (fixed)\n", nl->cur_rxl_index );
+ pr_cont(", receive level 0x%x (fixed)\n", nl->cur_rxl_index);
else
- printk( "(auto)\n");
+ pr_cont(", receive level (auto)\n");

#ifdef CONFIG_SBNI_MULTILINE
nl->master = dev;
@@ -568,7 +567,7 @@ handle_channel( struct net_device *dev )
*/
csr0 = inb( ioaddr + CSR0 );
if( !(csr0 & TR_RDY) || (csr0 & RC_RDY) )
- printk( KERN_ERR "%s: internal error!\n", dev->name );
+ netdev_err(dev, "internal error!\n");

/* if state & FL_NEED_RESEND != 0 then tx_frameno != 0 */
if( req_ans || nl->tx_frameno != 0 )
@@ -851,7 +850,7 @@ prepare_to_send( struct sk_buff *skb, struct net_device *dev )

/* nl->tx_buf_p == NULL here! */
if( nl->tx_buf_p )
- printk( KERN_ERR "%s: memory leak!\n", dev->name );
+ netdev_err(dev, "memory leak!\n");

nl->outpos = 0;
nl->state &= ~(FL_WAIT_ACK | FL_NEED_RESEND);
@@ -1179,16 +1178,15 @@ sbni_open( struct net_device *dev )

((struct net_local *) (netdev_priv(*p)))
->second = dev;
- printk( KERN_NOTICE "%s: using shared irq "
- "with %s\n", dev->name, (*p)->name );
+ netdev_notice(dev, "using shared irq with %s\n",
+ (*p)->name);
nl->state |= FL_SECONDARY;
goto handler_attached;
}
}

if( request_irq(dev->irq, sbni_interrupt, IRQF_SHARED, dev->name, dev) ) {
- printk( KERN_ERR "%s: unable to get IRQ %d.\n",
- dev->name, dev->irq );
+ netdev_err(dev, "unable to get IRQ %d\n", dev->irq);
return -EAGAIN;
}

@@ -1220,8 +1218,8 @@ sbni_close( struct net_device *dev )
struct net_local *nl = netdev_priv(dev);

if( nl->second && nl->second->flags & IFF_UP ) {
- printk( KERN_NOTICE "Secondary channel (%s) is active!\n",
- nl->second->name );
+ netdev_notice(dev, "Secondary channel (%s) is active!\n",
+ nl->second->name);
return -EBUSY;
}

@@ -1363,8 +1361,8 @@ sbni_ioctl( struct net_device *dev, struct ifreq *ifr, int cmd )
return -EFAULT;
slave_dev = dev_get_by_name(&init_net, slave_name );
if( !slave_dev || !(slave_dev->flags & IFF_UP) ) {
- printk( KERN_ERR "%s: trying to enslave non-active "
- "device %s\n", dev->name, slave_name );
+ netdev_err(dev, "trying to enslave non-active device %s\n",
+ slave_name);
return -EPERM;
}

@@ -1417,8 +1415,7 @@ enslave( struct net_device *dev, struct net_device *slave_dev )

spin_unlock( &snl->lock );
spin_unlock( &nl->lock );
- printk( KERN_NOTICE "%s: slave device (%s) attached.\n",
- dev->name, slave_dev->name );
+ netdev_notice(dev, "slave device (%s) attached\n", slave_dev->name);
return 0;
}

@@ -1547,7 +1544,7 @@ sbni_setup( char *p )
break;
}
bad_param:
- printk( KERN_ERR "Error in sbni kernel parameter!\n" );
+ pr_err("Error in sbni kernel parameter!\n");
return 0;
}

diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index e91457d..0b4fd05 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -12,6 +12,8 @@
*
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -190,7 +192,7 @@ static int slvl_setup(struct slvl_device *sv, int iobase, int irq)
dev->irq = irq;

if (register_hdlc_device(dev)) {
- printk(KERN_ERR "sealevel: unable to register HDLC device\n");
+ pr_err("unable to register HDLC device\n");
free_netdev(dev);
return -1;
}
@@ -215,8 +217,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
*/

if (!request_region(iobase, 8, "Sealevel 4021")) {
- printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n",
- iobase);
+ pr_warn("I/O 0x%X already in use\n", iobase);
return NULL;
}

@@ -267,7 +268,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,

if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
"SeaLevel", dev) < 0) {
- printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
+ pr_warn("IRQ %d already in use\n", irq);
goto err_request_irq;
}

@@ -292,7 +293,7 @@ static __init struct slvl_board *slvl_init(int iobase, int irq,
*/

if (z8530_init(dev) != 0) {
- printk(KERN_ERR "Z8530 series device not found.\n");
+ pr_err("Z8530 series device not found\n");
enable_irq(irq);
goto free_hw;
}
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 24297b2..46ceb3a 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -14,6 +14,8 @@
* 2000-10-29 Henner Eisen lapb_data_indication() return status.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>

#include <asm/system.h>
@@ -96,7 +98,7 @@ static struct x25_asy *x25_asy_alloc(void)
x25_asy_devs[i] = dev;
return sl;
} else {
- printk(KERN_WARNING "x25_asy_alloc() - register_netdev() failure.\n");
+ pr_warn("%s(): register_netdev() failure\n", __func__);
free_netdev(dev);
}
}
@@ -114,8 +116,7 @@ static void x25_asy_free(struct x25_asy *sl)
sl->xbuff = NULL;

if (!test_and_clear_bit(SLF_INUSE, &sl->flags))
- printk(KERN_ERR "%s: x25_asy_free for already free unit.\n",
- sl->dev->name);
+ netdev_err(sl->dev, "x25_asy_free for already free unit\n");
}

static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
@@ -128,8 +129,7 @@ static int x25_asy_change_mtu(struct net_device *dev, int newmtu)
rbuff = kmalloc(len + 4, GFP_ATOMIC);

if (xbuff == NULL || rbuff == NULL) {
- printk(KERN_WARNING "%s: unable to grow X.25 buffers, MTU change cancelled.\n",
- dev->name);
+ netdev_warn(dev, "unable to grow X.25 buffers, MTU change cancelled\n");
kfree(xbuff);
kfree(rbuff);
return -ENOMEM;
@@ -198,8 +198,7 @@ static void x25_asy_bump(struct x25_asy *sl)

skb = dev_alloc_skb(count+1);
if (skb == NULL) {
- printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n",
- sl->dev->name);
+ netdev_warn(sl->dev, "memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
return;
}
@@ -287,9 +286,9 @@ static void x25_asy_timeout(struct net_device *dev)
/* May be we must check transmitter timeout here ?
* 14 Oct 1994 Dmitry Gorodchanin.
*/
- printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
- (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
- "bad line quality" : "driver error");
+ netdev_warn(dev, "transmit timed out, %s?\n",
+ (tty_chars_in_buffer(sl->tty) || sl->xleft) ?
+ "bad line quality" : "driver error");
sl->xleft = 0;
clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
x25_asy_unlock(sl);
@@ -306,8 +305,7 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
int err;

if (!netif_running(sl->dev)) {
- printk(KERN_ERR "%s: xmit call when iface is down\n",
- dev->name);
+ netdev_err(dev, "xmit call when iface is down\n");
kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -318,13 +316,15 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,
case X25_IFACE_CONNECT: /* Connection request .. do nothing */
err = lapb_connect_request(dev);
if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy: lapb_connect_request error - %d\n", err);
+ netdev_err(dev, "lapb_connect_request error: %d\n",
+ err);
kfree_skb(skb);
return NETDEV_TX_OK;
case X25_IFACE_DISCONNECT: /* do nothing - hang up ?? */
err = lapb_disconnect_request(dev);
if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy: lapb_disconnect_request error - %d\n", err);
+ netdev_err(dev, "lapb_disconnect_request error: %d\n",
+ err);
default:
kfree_skb(skb);
return NETDEV_TX_OK;
@@ -343,7 +343,7 @@ static netdev_tx_t x25_asy_xmit(struct sk_buff *skb,

err = lapb_data_request(dev, skb);
if (err != LAPB_OK) {
- printk(KERN_ERR "x25_asy: lapb_data_request error - %d\n", err);
+ netdev_err(dev, "lapb_data_request error: %d\n", err);
kfree_skb(skb);
return NETDEV_TX_OK;
}
@@ -378,7 +378,7 @@ static void x25_asy_data_transmit(struct net_device *dev, struct sk_buff *skb)
spin_lock(&sl->lock);
if (netif_queue_stopped(sl->dev) || sl->tty == NULL) {
spin_unlock(&sl->lock);
- printk(KERN_ERR "x25_asy: tbusy drop\n");
+ netdev_err(dev, "tbusy drop\n");
kfree_skb(skb);
return;
}
@@ -404,7 +404,7 @@ static void x25_asy_connected(struct net_device *dev, int reason)

skb = dev_alloc_skb(1);
if (skb == NULL) {
- printk(KERN_ERR "x25_asy: out of memory\n");
+ netdev_err(dev, "out of memory\n");
return;
}

@@ -423,7 +423,7 @@ static void x25_asy_disconnected(struct net_device *dev, int reason)

skb = dev_alloc_skb(1);
if (skb == NULL) {
- printk(KERN_ERR "x25_asy: out of memory\n");
+ netdev_err(dev, "out of memory\n");
return;
}

@@ -603,8 +603,8 @@ static void x25_asy_close_tty(struct tty_struct *tty)

err = lapb_unregister(sl->dev);
if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
- err);
+ pr_err("x25_asy_close: lapb_unregister error: %d\n",
+ err);

tty->disc_data = NULL;
sl->tty = NULL;
@@ -782,14 +782,13 @@ static int __init init_x25_asy(void)
if (x25_asy_maxdev < 4)
x25_asy_maxdev = 4; /* Sanity */

- printk(KERN_INFO "X.25 async: version 0.00 ALPHA "
- "(dynamic channels, max=%d).\n", x25_asy_maxdev);
+ pr_info("X.25 async: version 0.00 ALPHA (dynamic channels, max=%d)\n",
+ x25_asy_maxdev);

x25_asy_devs = kcalloc(x25_asy_maxdev, sizeof(struct net_device *),
GFP_KERNEL);
if (!x25_asy_devs) {
- printk(KERN_WARNING "X25 async: Can't allocate x25_asy_ctrls[] "
- "array! Uaargh! (-> No X.25 available)\n");
+ pr_warn("Can't allocate x25_asy_ctrls[] array! Uaargh! (-> No X.25 available)\n");
return -ENOMEM;
}

diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 0806232..0e57690 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -36,6 +36,8 @@
* Synchronous mode without DMA is unlikely to pass about 2400 baud.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -365,7 +367,7 @@ static void z8530_rx(struct z8530_channel *c)
c->count=0;
if(stat&Rx_OVR)
{
- printk(KERN_WARNING "%s: overrun\n", c->dev->name);
+ pr_warn("%s: overrun\n", c->dev->name);
c->rx_overrun++;
}
if(stat&CRC_ERR)
@@ -464,12 +466,12 @@ static void z8530_status(struct z8530_channel *chan)
if (altered & chan->dcdcheck)
{
if (status & chan->dcdcheck) {
- printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
+ pr_info("%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
if (chan->netdevice)
netif_carrier_on(chan->netdevice);
} else {
- printk(KERN_INFO "%s: DCD lost\n", chan->dev->name);
+ pr_info("%s: DCD lost\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
z8530_flush_fifo(chan);
if (chan->netdevice)
@@ -538,12 +540,12 @@ static void z8530_dma_tx(struct z8530_channel *chan)
{
if(!chan->dma_tx)
{
- printk(KERN_WARNING "Hey who turned the DMA off?\n");
+ pr_warn("Hey who turned the DMA off?\n");
z8530_tx(chan);
return;
}
/* This shouldn't occur in DMA mode */
- printk(KERN_ERR "DMA tx - bogus event!\n");
+ pr_err("DMA tx - bogus event!\n");
z8530_tx(chan);
}

@@ -585,12 +587,12 @@ static void z8530_dma_status(struct z8530_channel *chan)
if (altered & chan->dcdcheck)
{
if (status & chan->dcdcheck) {
- printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
+ pr_info("%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] | RxENABLE);
if (chan->netdevice)
netif_carrier_on(chan->netdevice);
} else {
- printk(KERN_INFO "%s:DCD lost\n", chan->dev->name);
+ pr_info("%s: DCD lost\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE);
z8530_flush_fifo(chan);
if (chan->netdevice)
@@ -712,7 +714,7 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id)

if(locker)
{
- printk(KERN_ERR "IRQ re-enter\n");
+ pr_err("IRQ re-enter\n");
return IRQ_NONE;
}
locker=1;
@@ -758,7 +760,8 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id)
}
spin_unlock(&dev->lock);
if(work==5000)
- printk(KERN_ERR "%s: interrupt jammed - abort(0x%X)!\n", dev->name, intr);
+ pr_err("%s: interrupt jammed - abort(0x%X)!\n",
+ dev->name, intr);
/* Ok all done */
locker=0;
return IRQ_HANDLED;
@@ -1225,7 +1228,7 @@ static const char *z8530_type_name[]={

void z8530_describe(struct z8530_dev *dev, char *mapping, unsigned long io)
{
- printk(KERN_INFO "%s: %s found at %s 0x%lX, IRQ %d.\n",
+ pr_info("%s: %s found at %s 0x%lX, IRQ %d\n",
dev->name,
z8530_type_name[dev->type],
mapping,
@@ -1621,8 +1624,7 @@ static void z8530_rx_done(struct z8530_channel *c)
else
/* Can't occur as we dont reenable the DMA irq until
after the flip is done */
- printk(KERN_WARNING "%s: DMA flip overrun!\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "DMA flip overrun!\n");

release_dma_lock(flags);

@@ -1637,8 +1639,7 @@ static void z8530_rx_done(struct z8530_channel *c)
skb = dev_alloc_skb(ct);
if (skb == NULL) {
c->netdevice->stats.rx_dropped++;
- printk(KERN_WARNING "%s: Memory squeeze.\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "Memory squeeze\n");
} else {
skb_put(skb, ct);
skb_copy_to_linear_data(skb, rxb, ct);
@@ -1678,8 +1679,7 @@ static void z8530_rx_done(struct z8530_channel *c)

c->skb2 = dev_alloc_skb(c->mtu);
if (c->skb2 == NULL)
- printk(KERN_WARNING "%s: memory squeeze.\n",
- c->netdevice->name);
+ netdev_warn(c->netdevice, "memory squeeze\n");
else
skb_put(c->skb2, c->mtu);
c->netdevice->stats.rx_packets++;
@@ -1693,7 +1693,7 @@ static void z8530_rx_done(struct z8530_channel *c)
c->rx_function(c, skb);
} else {
c->netdevice->stats.rx_dropped++;
- printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name);
+ netdev_err(c->netdevice, "Lost a frame\n");
}
}

--
1.7.6.rc1


\
 
 \ /
  Last update: 2011-06-27 07:13    [from the cache]
©2003-2011 Jasper Spaans