lkml.org 
[lkml]   [2011]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH] irq: add irq_domain translation infrastructure
From
Date
On Mon, 2011-06-27 at 11:57 +0200, Sebastian Andrzej Siewior wrote:

> I see. No, actually I don't. xics is pseries where I don't see the .dts.
> So you are saying that we have one irq_domain but 2+ different
> interrupt-parents nodes?

Yes. Basically the various PCI bridges and other interrupt sources like
HEA contain what are called "source controllers" that control the
targetting of interrupts (toward a CPU thread), priority, masking etc...

Those act as device-tree parents as well, there's pretty much one per
PCI host bridge for example since that's where all of the
configuration/masking/etc... happens.

However, they then turn interrupts into a special bus message that
reaches eventually a presentation controller (there's one per HW
thread). Those messages are basically the "HW interrupt numbers" (along
with priority info etc...) and that number encodes a "BUID" which
identifies the source controller that shot the message.

Thus the "interrupt numbers" are unique accross the fabric and live in a
unique number space. It's one domain for all intend and purposes. But
several device-nodes.

Now as to whether it's several irq_chip or not .. well, it depends :-)
On pHyp and old style pseries, it's a single set of FW call, it's
abstracted, so it's also basically one chip. On WSP, the separate source
controllers (ICS) are exposed as individual chips.

> How do you distinguish then between two different controllers lets say
> xics and a gpio based controller? This implementation calls ->dt_translate
> until one controller returns 0 which looks like brute force.

It's a bit brute force but would work if the xics implementation of that
translate call checks that the device-node is indeed a XICS source
controller (which can be identified by its compatible property).

Now I have lost track a bit with what Grant is doing, is this the old DT
stuff I objected to ? I basically asked him to make the remapping
orthogonal from the DT matching.

> xics_host_xlate() returns always zero so you would have to go for
> the compatible and check it.
> Every device has an interrupt-parent node. Shouldn't the code call exact
> this irq controller xlate function instead of trying them all?

Well, my powerpc code iterates the domains with "match" to check which
one claims to own the parent device-node, then calls xlate for that one,
but I see why one could collapse those two action after all.

Cheers,
Ben.

> >
> > Cheers,
> > Ben.
> >
> Sebastian




\
 
 \ /
  Last update: 2011-06-27 12:21    [W:0.054 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site