lkml.org 
[lkml]   [2011]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/9] mfd: Only register wm831x RTC device if the 32.768kHz crystal is enabled
Date
The RTC uses the 32.768kHz crystal so if it's not enabled (and it can only
be enabled via OTP or InstantConfig, not runtime software) the RTC can't
function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 48 ++++++++++++++++++++++++++------------------
1 files changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index ff57a16..58f033b 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -976,11 +976,6 @@ static struct mfd_cell wm8310_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1108,11 +1103,6 @@ static struct mfd_cell wm8311_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1264,11 +1254,6 @@ static struct mfd_cell wm8312_devs[] = {
.resources = wm831x_power_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1395,11 +1380,6 @@ static struct mfd_cell wm8320_devs[] = {
.resources = wm831x_on_resources,
},
{
- .name = "wm831x-rtc",
- .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
- .resources = wm831x_rtc_resources,
- },
- {
.name = "wm831x-status",
.id = 1,
.num_resources = ARRAY_SIZE(wm831x_status1_resources),
@@ -1426,6 +1406,13 @@ static struct mfd_cell touch_devs[] = {
},
};

+static struct mfd_cell rtc_devs[] = {
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+};

static struct mfd_cell backlight_devs[] = {
{
@@ -1658,6 +1645,27 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
goto err_irq;
}

+ /* The RTC can only be used if the 32.768kHz crystal is
+ * enabled; this can't be controlled by software at runtime.
+ */
+ ret = wm831x_reg_read(wm831x, WM831X_CLOCK_CONTROL_2);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read clock status: %d\n", ret);
+ goto err_irq;
+ }
+
+ if (ret & WM831X_XTAL_ENA) {
+ ret = mfd_add_devices(wm831x->dev, wm831x_num,
+ rtc_devs, ARRAY_SIZE(rtc_devs),
+ NULL, wm831x->irq_base);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret);
+ goto err_irq;
+ }
+ } else {
+ dev_info(wm831x->dev, "32.768kHz clock disabled, no RTC\n");
+ }
+
if (pdata && pdata->backlight) {
/* Treat errors as non-critical */
ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs,
--
1.7.5.3


\
 
 \ /
  Last update: 2011-06-02 20:23    [W:0.062 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site