Messages in this thread Patch in this message | | | Date | Wed, 15 Jun 2011 16:59:52 -0700 | From | Greg KH <> | Subject | [29/89] PCI: Set PCIE maxpayload for card during hotplug insertion |
| |
2.6.39-stable review patch. If anyone has any objections, please let us know.
------------------
From: "Jordan_Hargrave@Dell.com" <Jordan_Hargrave@Dell.com>
commit e522a7126c7c144a1dd14c6f217ac31e71082b1d upstream.
The following patch sets the MaxPayload setting to match the parent reading when inserting a PCIE card into a hotplug slot. On our system, the upstream bridge is set to 256, but when inserting a card, the card setting defaults to 128. As soon as I/O is performed to the card it starts receiving errors since the payload size is too small.
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
--- drivers/pci/hotplug/pcihp_slot.c | 45 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+)
--- a/drivers/pci/hotplug/pcihp_slot.c +++ b/drivers/pci/hotplug/pcihp_slot.c @@ -158,6 +158,47 @@ static void program_hpp_type2(struct pci */ } +/* Program PCIE MaxPayload setting on device: ensure parent maxpayload <= device */ +static int pci_set_payload(struct pci_dev *dev) +{ + int pos, ppos; + u16 pctl, psz; + u16 dctl, dsz, dcap, dmax; + struct pci_dev *parent; + + parent = dev->bus->self; + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + if (!pos) + return 0; + + /* Read Device MaxPayload capability and setting */ + pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &dctl); + pci_read_config_word(dev, pos + PCI_EXP_DEVCAP, &dcap); + dsz = (dctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5; + dmax = (dcap & PCI_EXP_DEVCAP_PAYLOAD); + + /* Read Parent MaxPayload setting */ + ppos = pci_find_capability(parent, PCI_CAP_ID_EXP); + if (!ppos) + return 0; + pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl); + psz = (pctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5; + + /* If parent payload > device max payload -> error + * If parent payload > device payload -> set speed + * If parent payload <= device payload -> do nothing + */ + if (psz > dmax) + return -1; + else if (psz > dsz) { + dev_info(&dev->dev, "Setting MaxPayload to %d\n", 128 << psz); + pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, + (dctl & ~PCI_EXP_DEVCTL_PAYLOAD) + + (psz << 5)); + } + return 0; +} + void pci_configure_slot(struct pci_dev *dev) { struct pci_dev *cdev; @@ -169,6 +210,10 @@ void pci_configure_slot(struct pci_dev * (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI))) return; + ret = pci_set_payload(dev); + if (ret) + dev_warn(&dev->dev, "could not set device max payload\n"); + memset(&hpp, 0, sizeof(hpp)); ret = pci_get_hp_params(dev, &hpp); if (ret)
| |