lkml.org 
[lkml]   [2011]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/10] arch/arm/mach-s5pv210/cpufreq.c: add missing clk_put
On 06/01/11 10:10, Julia Lawall wrote:
> From: Julia Lawall<julia@diku.dk>
>
> The successive calls to clk_get each call clk_put in the case of failure,
> but this is not done for subsequent error handling code. The calls to
> clk_get are moved to the end of the function, and appropriate gotos are
> added.
>
> A simplified version of the semantic match that finds this problem is as
> follows: (http://coccinelle.lip6.fr/)
>
> //<smpl>
> @r exists@
> expression e1,e2;
> statement S;
> @@
>
> e1 = clk_get@p1(...);
> ... when != e1 = e2
> when != clk_put(e1)
> when any
> if (...) { ... when != clk_put(e1)
> when != if (...) { ... clk_put(e1) ... }
> * return@p3 ...;
> } else S
> //</smpl>
>
> Signed-off-by: Julia Lawall<julia@diku.dk>
>
> ---
> arch/arm/mach-s5pv210/cpufreq.c | 25 +++++++++++++++++--------
> 1 file changed, 17 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
> index 22046e2..97a29e1 100644
> --- a/arch/arm/mach-s5pv210/cpufreq.c
> +++ b/arch/arm/mach-s5pv210/cpufreq.c
> @@ -414,6 +414,7 @@ static int check_mem_type(void __iomem *dmc_reg)
> static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
> {
> unsigned long mem_type;
> + int ret;
>
> cpu_clk = clk_get(NULL, "armclk");
> if (IS_ERR(cpu_clk))
> @@ -421,19 +422,20 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
>
> dmc0_clk = clk_get(NULL, "sclk_dmc0");
> if (IS_ERR(dmc0_clk)) {
> - clk_put(cpu_clk);
> - return PTR_ERR(dmc0_clk);
> + ret = PTR_ERR(dmc0_clk);
> + goto out_dmc0;
> }
>
> dmc1_clk = clk_get(NULL, "hclk_msys");
> if (IS_ERR(dmc1_clk)) {
> - clk_put(dmc0_clk);
> - clk_put(cpu_clk);
> - return PTR_ERR(dmc1_clk);
> + ret = PTR_ERR(dmc1_clk);
> + goto out_dmc1;
> }
>
> - if (policy->cpu != 0)
> - return -EINVAL;
> + if (policy->cpu != 0) {
> + ret = -EINVAL;
> + goto out_dmc1;
> + }
>
> /*
> * check_mem_type : This driver only support LPDDR& LPDDR2.
> @@ -443,7 +445,8 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
>
> if ((mem_type != LPDDR)&& (mem_type != LPDDR2)) {
> printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto out_dmc1;
> }
>
> /* Find current refresh counter and frequency each DMC */
> @@ -460,6 +463,12 @@ static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
> policy->cpuinfo.transition_latency = 40000;
>
> return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
> +
> +out_dmc1:
> + clk_put(dmc0_clk);
> +out_dmc0:
> + clk_put(cpu_clk);
> + return ret;
> }
>
> static struct cpufreq_driver s5pv210_driver = {
>
>

Yeah, OK to me, will apply.
Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.


\
 
 \ /
  Last update: 2011-06-01 23:29    [W:0.032 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site