lkml.org 
[lkml]   [2011]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [tip:sched/locking] sched: Add p->pi_lock to task_rq_lock()
On 01.06.2011 20:44, Peter Zijlstra wrote:
> On Wed, 2011-06-01 at 20:09 +0200, Peter Zijlstra wrote:
>> On Wed, 2011-06-01 at 19:20 +0200, Arne Jansen wrote:
>>> On 01.06.2011 18:35, Peter Zijlstra wrote:
>>>> On Wed, 2011-06-01 at 15:58 +0200, Arne Jansen wrote:
>>>>> git bisect blames this commit for a problem I have with v3.0-rc1:
>>>>> If I printk large amounts of data, the machine locks up.
>>>>> As the commit does not revert cleanly on top of 3.0, I haven't been
>>>>> able to double check.
>>>>> The test I use is simple, just add something like
>>>>>
>>>>> for (i=0; i< 10000; ++i) printk("test %d\n", i);
>>>>>
>>>>> and trigger it, in most cases I can see the first 10 printks before
>>>>> I have to power cycle the machine (sysrq-b does not work anymore).
>>>>> Attached my .config.
>>>>
>>>> I've made me a module that does the above, I've also changed my .config
>>>> to match yours (smp=y, sched-cgroup=y, autogroup=n, preempt=n, no_hz=y),
>>>> but sadly I cannot reproduce, I get all 10k prints on my serial line.
>>>>
>>>> Even without serial line it works (somehow booting without visible
>>>> console is scary as hell :)
>>>>
>>>> Which makes me ask, how are you observing your console?
>>>>
>>>
>>> They don't go out to the serial line, I only observe them with a
>>> tail -f on messages. Default log level doesn't go the console here.
>>
>> Right ok, so I used your exact .config, added a few drivers needed for
>> my hardware and indeed, it doesn't even finish booting and gets stuck
>> someplace.
>>
>> Sadly it looks like even the NMI watchdog is dead,.. /me goes try and
>> make sense of this.
>
> Sadly both 0122ec5b02f766c355b3168df53a6c038a24fa0d^1 and
> 0122ec5b02f766c355b3168df53a6c038a24fa0d itself boot just fine and run
> the test module without problems.

I can only partially confirm this:

2acca55ed98ad9b9aa25e7e587ebe306c0313dc7 runs fine
0122ec5b02f766c355b3168df53a6c038a24fa0d freezes after line 189
ab2515c4b98f7bc4fa11cad9fa0f811d63a72a26 freezes after line 39

>
> I will have to re-bisect this.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



\
 
 \ /
  Last update: 2011-06-01 21:35    [W:0.138 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site