lkml.org 
[lkml]   [2011]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[019/165] ath9k_hw: fix dual band assumption for XB113
2.6.39-stable review patch.  If anyone has any objections, please let us know.

------------------
Content-Length: 1271
Lines: 35

From: Luis R. Rodriguez <lrodriguez@atheros.com>

commit 9ba7f4f5eba5f4b44c7796bbad29f8ec3a7d5864 upstream.

The XB113 cards are single band, 5 GHz-only, but the
default settings were configured to assume it was dual
band. Users of these cards then would see 2.4 GHz channels
but you would never get any scan results from these channels
given that the radio is not present.

Cc: Fiona Cain <Fiona.Cain@atheros.com>
Cc: Ray Li <ray.li@greenwavereality.com>
Cc: Kathy Giori <kathy.giori@atheros.com>
Cc: Aeolus Yang <aeolus.yang@atheros.com>
Cc: Dan Friedman <dan.friedman@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -652,7 +652,7 @@ static const struct ar9300_eeprom ar9300
.regDmn = { LE16(0), LE16(0x1f) },
.txrxMask = 0x77, /* 4 bits tx and 4 bits rx */
.opCapFlags = {
- .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+ .opFlags = AR5416_OPFLAGS_11A,
.eepMisc = 0,
},
.rfSilent = 0,



\
 
 \ /
  Last update: 2011-06-01 10:21    [W:0.346 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site