lkml.org 
[lkml]   [2011]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7] bcma: add Broadcom specific AMBA bus driver
Date
Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.

In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.

Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).

Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.

Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
V2: Rename to axi
Use DEFINE_PCI_DEVICE_TABLE in bridge
Make use of pr_fmt and pr_*
Store core class
Rename bridge to not b43 specific
Replace magic 0x1000 with BCMAI_CORE_SIZE
Remove some old "ssb" names and defines
Move BCMAI_ADDR_BASE def
Add drvdata field
V3: Fix reloading (kfree issue)
Add 14e4:0x4331
Fix non-initialized struct issue
Drop useless inline functions wrappers for pci core drv
Proper pr_* usage
V3.1: Include forgotten changes (pr_* and include related)
Explain why we dare to implement empty release function
V4: Add ABI documentation
Move struct device to wrapper and alloc it dynamically
checkpatch.pl pointed fixes
V5: Rename to bcma, AXI was really bad name
Use EXPORT_SYMBOL_GPL
Set pci driver fields in one place
Drop unlikely
Use BCMA_CORE_SIZE for calc in awrite32
Add README
Fix compilation (delay.h)
V6: Replace AXI in Documentation
Fill MAINTAINERS
Names only for Broadcom
Update TODO and README
Use errno
V7: Describe driver in commit message
Use linked list for devices
---
Documentation/ABI/testing/sysfs-bus-bcma | 31 +++
MAINTAINERS | 7 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/bcma/Kconfig | 33 +++
drivers/bcma/Makefile | 7 +
drivers/bcma/README | 19 ++
drivers/bcma/TODO | 3 +
drivers/bcma/bcma_private.h | 28 ++
drivers/bcma/core.c | 51 ++++
drivers/bcma/driver_chipcommon.c | 87 +++++++
drivers/bcma/driver_chipcommon_pmu.c | 134 ++++++++++
drivers/bcma/driver_pci.c | 163 ++++++++++++
drivers/bcma/host_pci.c | 196 +++++++++++++++
drivers/bcma/main.c | 247 ++++++++++++++++++
drivers/bcma/scan.c | 360 +++++++++++++++++++++++++++
drivers/bcma/scan.h | 56 ++++
include/linux/bcma/bcma.h | 224 +++++++++++++++++
include/linux/bcma/bcma_driver_chipcommon.h | 297 ++++++++++++++++++++++
include/linux/bcma/bcma_driver_pci.h | 89 +++++++
include/linux/bcma/bcma_regs.h | 34 +++
include/linux/mod_devicetable.h | 17 ++
scripts/mod/file2alias.c | 22 ++
23 files changed, 2108 insertions(+), 0 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-bcma
create mode 100644 drivers/bcma/Kconfig
create mode 100644 drivers/bcma/Makefile
create mode 100644 drivers/bcma/README
create mode 100644 drivers/bcma/TODO
create mode 100644 drivers/bcma/bcma_private.h
create mode 100644 drivers/bcma/core.c
create mode 100644 drivers/bcma/driver_chipcommon.c
create mode 100644 drivers/bcma/driver_chipcommon_pmu.c
create mode 100644 drivers/bcma/driver_pci.c
create mode 100644 drivers/bcma/host_pci.c
create mode 100644 drivers/bcma/main.c
create mode 100644 drivers/bcma/scan.c
create mode 100644 drivers/bcma/scan.h
create mode 100644 include/linux/bcma/bcma.h
create mode 100644 include/linux/bcma/bcma_driver_chipcommon.h
create mode 100644 include/linux/bcma/bcma_driver_pci.h
create mode 100644 include/linux/bcma/bcma_regs.h

diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 0000000..06b62ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@
+What: /sys/bus/bcma/devices/.../manuf
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ Each BCMA core has it's manufacturer id. See
+ include/linux/bcma/bcma.h for possible values.
+
+What: /sys/bus/bcma/devices/.../id
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ There are a few types of BCMA cores, they can be identified by
+ id field.
+
+What: /sys/bus/bcma/devices/.../rev
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ BCMA cores of the same type can still slightly differ depending
+ on their revision. Use it for detailed programming.
+
+What: /sys/bus/bcma/devices/.../class
+Date: May 2011
+KernelVersion: 2.6.40
+Contact: Rafał Miłecki <zajec5@gmail.com>
+Description:
+ Each BCMA core is identified by few fields, including class it
+ belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/MAINTAINERS b/MAINTAINERS
index f7cb5a7..f1e235a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5816,6 +5816,13 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/

+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M: Rafał Miłecki <zajec5@gmail.com>
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: drivers/bcma/
+F: include/linux/bcma/
+
SONY VAIO CONTROL DEVICE DRIVER
M: Mattia Dongili <malattia@linux.it>
L: platform-driver-x86@vger.kernel.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d1..aca7067 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,6 +68,8 @@ source "drivers/watchdog/Kconfig"

source "drivers/ssb/Kconfig"

+source "drivers/bcma/Kconfig"
+
source "drivers/mfd/Kconfig"

source "drivers/regulator/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 3f135b6..a29527f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
+obj-$(CONFIG_BCMA) += bcma/
obj-$(CONFIG_VHOST_NET) += vhost/
obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_STAGING) += staging/
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 0000000..353781b
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,33 @@
+config BCMA_POSSIBLE
+ bool
+ depends on HAS_IOMEM && HAS_DMA
+ default y
+
+menu "Broadcom specific AMBA"
+ depends on BCMA_POSSIBLE
+
+config BCMA
+ tristate "BCMA support"
+ depends on BCMA_POSSIBLE
+ help
+ Bus driver for Broadcom specific Advanced Microcontroller Bus
+ Architecture.
+
+config BCMA_HOST_PCI_POSSIBLE
+ bool
+ depends on BCMA && PCI = y
+ default y
+
+config BCMA_HOST_PCI
+ bool "Support for BCMA on PCI-host bus"
+ depends on BCMA_HOST_PCI_POSSIBLE
+
+config BCMA_DEBUG
+ bool "BCMA debugging"
+ depends on BCMA
+ help
+ This turns on additional debugging messages.
+
+ If unsure, say N
+
+endmenu
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
new file mode 100644
index 0000000..0d56245
--- /dev/null
+++ b/drivers/bcma/Makefile
@@ -0,0 +1,7 @@
+bcma-y += main.o scan.o core.o
+bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-y += driver_pci.o
+bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o
+obj-$(CONFIG_BCMA) += bcma.o
+
+ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG
diff --git a/drivers/bcma/README b/drivers/bcma/README
new file mode 100644
index 0000000..f7e7ce4
--- /dev/null
+++ b/drivers/bcma/README
@@ -0,0 +1,19 @@
+Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
+however from programming point of view there is nothing AMBA specific we use.
+
+Standard AMBA drivers are platform specific, have hardcoded addresses and use
+AMBA standard fields like CID and PID.
+
+In case of Broadcom's cards every device consists of:
+1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
+ as standard AMBA device. Reading it's CID or PID can cause machine lockup.
+2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
+ and PIDs (0x103BB369), but we do not use that info for anything. One of that
+ devices is used for managing Broadcom specific core.
+
+Addresses of AMBA devices are not hardcoded in driver and have to be read from
+EPROM.
+
+In this situation we decided to introduce separated bus. It can contain up to
+16 devices identified by Broadcom specific fields: manufacturer, id, revision
+and class.
diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO
new file mode 100644
index 0000000..da7aa99
--- /dev/null
+++ b/drivers/bcma/TODO
@@ -0,0 +1,3 @@
+- Interrupts
+- Defines for PCI core driver
+- Create kernel Documentation (use info from README)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
new file mode 100644
index 0000000..2f72e9c
--- /dev/null
+++ b/drivers/bcma/bcma_private.h
@@ -0,0 +1,28 @@
+#ifndef LINUX_BCMA_PRIVATE_H_
+#define LINUX_BCMA_PRIVATE_H_
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+
+#define BCMA_CORE_SIZE 0x1000
+
+struct bcma_bus;
+
+/* main.c */
+extern int bcma_bus_register(struct bcma_bus *bus);
+extern void bcma_bus_unregister(struct bcma_bus *bus);
+
+/* scan.c */
+int bcma_bus_scan(struct bcma_bus *bus);
+
+#ifdef CONFIG_BCMA_HOST_PCI
+/* host_pci.c */
+extern int __init bcma_host_pci_init(void);
+extern void __exit bcma_host_pci_exit(void);
+#endif /* CONFIG_BCMA_HOST_PCI */
+
+#endif
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
new file mode 100644
index 0000000..ced379f
--- /dev/null
+++ b/drivers/bcma/core.c
@@ -0,0 +1,51 @@
+/*
+ * Broadcom specific AMBA
+ * Core ops
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+bool bcma_core_is_enabled(struct bcma_device *core)
+{
+ if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+ != BCMA_IOCTL_CLK)
+ return false;
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return false;
+ return true;
+}
+EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
+
+static void bcma_core_disable(struct bcma_device *core, u32 flags)
+{
+ if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+ return;
+
+ bcma_awrite32(core, BCMA_IOCTL, flags);
+ bcma_aread32(core, BCMA_IOCTL);
+ udelay(10);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+ udelay(1);
+}
+
+int bcma_core_enable(struct bcma_device *core, u32 flags)
+{
+ bcma_core_disable(core, flags);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
+ bcma_aread32(core, BCMA_IOCTL);
+
+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
+ udelay(1);
+
+ bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+ bcma_aread32(core, BCMA_IOCTL);
+ udelay(1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_core_enable);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
new file mode 100644
index 0000000..caf5960
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon.c
@@ -0,0 +1,87 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+ u32 mask, u32 value)
+{
+ value &= mask;
+ value |= bcma_cc_read32(cc, offset) & ~mask;
+ bcma_cc_write32(cc, offset, value);
+
+ return value;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+ if (cc->core->id.rev >= 11)
+ cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+ cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+ if (cc->core->id.rev >= 35)
+ cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
+ bcma_cc_write32(cc, 0x58, 0);
+ bcma_cc_write32(cc, 0x5C, 0);
+
+ if (cc->capabilities & BCMA_CC_CAP_PMU)
+ bcma_pmu_init(cc);
+ if (cc->capabilities & BCMA_CC_CAP_PCTL)
+ pr_err("Power control not implemented!\n");
+}
+
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+{
+ /* instant NMI */
+ bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+}
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
+}
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
+{
+ return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
+}
+
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
+{
+ return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+}
+
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+}
+
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+}
+
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+}
+
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+ return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+}
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
new file mode 100644
index 0000000..f44177a
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -0,0 +1,134 @@
+/*
+ * Broadcom specific AMBA
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+ u32 offset, u32 mask, u32 set)
+{
+ u32 value;
+
+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+ value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+ value &= mask;
+ value |= set;
+ bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
+ bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+}
+
+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ case 0x4331:
+ case 43224:
+ case 43225:
+ break;
+ default:
+ pr_err("PLL init unknown for device 0x%04X\n",
+ bus->chipinfo.id);
+ }
+}
+
+static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+ u32 min_msk = 0, max_msk = 0;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ min_msk = 0x200D;
+ max_msk = 0xFFFF;
+ break;
+ case 43224:
+ break;
+ default:
+ pr_err("PMU resource config unknown for device 0x%04X\n",
+ bus->chipinfo.id);
+ }
+
+ /* Set the resource masks. */
+ if (min_msk)
+ bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+ if (max_msk)
+ bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+}
+
+void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ case 0x4331:
+ case 43224:
+ break;
+ default:
+ pr_err("PMU switch/regulators init unknown for device "
+ "0x%04X\n", bus->chipinfo.id);
+ }
+}
+
+void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+{
+ struct bcma_bus *bus = cc->core->bus;
+
+ switch (bus->chipinfo.id) {
+ case 0x4313:
+ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+ break;
+ case 0x4331:
+ pr_err("Enabling Ext PA lines not implemented\n");
+ break;
+ case 43224:
+ if (bus->chipinfo.rev == 0) {
+ pr_err("Workarounds for 43224 rev 0 not fully "
+ "implemented\n");
+ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ } else {
+ bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+ }
+ break;
+ default:
+ pr_err("Workarounds unknown for device 0x%04X\n",
+ bus->chipinfo.id);
+ }
+}
+
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
+ u32 pmucap;
+
+ pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+ cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+ pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+ pmucap);
+
+ if (cc->pmu.rev == 1)
+ bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+ ~BCMA_CC_PMU_CTL_NOILPONW);
+ else
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+ BCMA_CC_PMU_CTL_NOILPONW);
+
+ if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+ pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+
+ bcma_pmu_pll_init(cc);
+ bcma_pmu_resources_init(cc);
+ bcma_pmu_swreg_init(cc);
+ bcma_pmu_workarounds(cc);
+}
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
new file mode 100644
index 0000000..b98b835
--- /dev/null
+++ b/drivers/bcma/driver_pci.c
@@ -0,0 +1,163 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+{
+ pcicore_write32(pc, 0x130, address);
+ pcicore_read32(pc, 0x130);
+ return pcicore_read32(pc, 0x134);
+}
+
+#if 0
+static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
+{
+ pcicore_write32(pc, 0x130, address);
+ pcicore_read32(pc, 0x130);
+ pcicore_write32(pc, 0x134, data);
+}
+#endif
+
+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ u32 v;
+ int i;
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ v |= (0x1F << 18);
+ v |= (phy << 4);
+ pcicore_write32(pc, mdio_data, v);
+
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+}
+
+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u16 ret = 0;
+ u32 v;
+ int i;
+
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
+ if (pc->core->id.rev >= 10) {
+ max_retries = 200;
+ bcma_pcie_mdio_set_phy(pc, device);
+ }
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 29); /* Read Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->core->id.rev < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < 200; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */) {
+ udelay(10);
+ ret = pcicore_read32(pc, mdio_data);
+ break;
+ }
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
+ return ret;
+}
+
+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+ u8 address, u16 data)
+{
+ const u16 mdio_control = 0x128;
+ const u16 mdio_data = 0x12C;
+ int max_retries = 10;
+ u32 v;
+ int i;
+
+ v = 0x80; /* Enable Preamble Sequence */
+ v |= 0x2; /* MDIO Clock Divisor */
+ pcicore_write32(pc, mdio_control, v);
+
+ if (pc->core->id.rev >= 10) {
+ max_retries = 200;
+ bcma_pcie_mdio_set_phy(pc, device);
+ }
+
+ v = (1 << 30); /* Start of Transaction */
+ v |= (1 << 28); /* Write Transaction */
+ v |= (1 << 17); /* Turnaround */
+ if (pc->core->id.rev < 10)
+ v |= (u32)device << 22;
+ v |= (u32)address << 18;
+ v |= data;
+ pcicore_write32(pc, mdio_data, v);
+ /* Wait for the device to complete the transaction */
+ udelay(10);
+ for (i = 0; i < max_retries; i++) {
+ v = pcicore_read32(pc, mdio_control);
+ if (v & 0x100 /* Trans complete */)
+ break;
+ msleep(1);
+ }
+ pcicore_write32(pc, mdio_control, 0);
+}
+
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
+{
+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
+{
+ const u8 serdes_pll_device = 0x1D;
+ const u8 serdes_rx_device = 0x1F;
+ u16 tmp;
+
+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+ bcma_pcicore_polarity_workaround(pc));
+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+ if (tmp & 0x4000)
+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+/**************************************************
+ * Init.
+ **************************************************/
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+ bcma_pcicore_serdes_workaround(pc);
+}
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
new file mode 100644
index 0000000..99dd36e
--- /dev/null
+++ b/drivers/bcma/host_pci.c
@@ -0,0 +1,196 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
+
+static void bcma_host_pci_switch_core(struct bcma_device *core)
+{
+ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
+ core->addr);
+ pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+ core->wrap);
+ core->bus->mapped_core = core;
+ pr_debug("Switched to core: 0x%X\n", core->id.id);
+}
+
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread8(core->bus->mmio + offset);
+}
+
+static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread16(core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread32(core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
+ u8 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite8(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
+ u16 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite16(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite32(value, core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
+ u32 value)
+{
+ if (core->bus->mapped_core != core)
+ bcma_host_pci_switch_core(core);
+ iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+const struct bcma_host_ops bcma_host_pci_ops = {
+ .read8 = bcma_host_pci_read8,
+ .read16 = bcma_host_pci_read16,
+ .read32 = bcma_host_pci_read32,
+ .write8 = bcma_host_pci_write8,
+ .write16 = bcma_host_pci_write16,
+ .write32 = bcma_host_pci_write32,
+ .aread32 = bcma_host_pci_aread32,
+ .awrite32 = bcma_host_pci_awrite32,
+};
+
+static int bcma_host_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct bcma_bus *bus;
+ int err = -ENOMEM;
+ const char *name;
+ u32 val;
+
+ /* Alloc */
+ bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ goto out;
+
+ /* Basic PCI configuration */
+ err = pci_enable_device(dev);
+ if (err)
+ goto err_kfree_bus;
+
+ name = dev_name(&dev->dev);
+ if (dev->driver && dev->driver->name)
+ name = dev->driver->name;
+ err = pci_request_regions(dev, name);
+ if (err)
+ goto err_pci_disable;
+ pci_set_master(dev);
+
+ /* Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_read_config_dword(dev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
+ /* SSB needed additional powering up, do we have any AMBA PCI cards? */
+ if (!pci_is_pcie(dev))
+ pr_err("PCI card detected, report problems.\n");
+
+ /* Map MMIO */
+ err = -ENOMEM;
+ bus->mmio = pci_iomap(dev, 0, ~0UL);
+ if (!bus->mmio)
+ goto err_pci_release_regions;
+
+ /* Host specific */
+ bus->host_pci = dev;
+ bus->hosttype = BCMA_HOSTTYPE_PCI;
+ bus->ops = &bcma_host_pci_ops;
+
+ /* Register */
+ err = bcma_bus_register(bus);
+ if (err)
+ goto err_pci_unmap_mmio;
+
+ pci_set_drvdata(dev, bus);
+
+out:
+ return err;
+
+err_pci_unmap_mmio:
+ pci_iounmap(dev, bus->mmio);
+err_pci_release_regions:
+ pci_release_regions(dev);
+err_pci_disable:
+ pci_disable_device(dev);
+err_kfree_bus:
+ kfree(bus);
+ return err;
+}
+
+static void bcma_host_pci_remove(struct pci_dev *dev)
+{
+ struct bcma_bus *bus = pci_get_drvdata(dev);
+
+ bcma_bus_unregister(bus);
+ pci_iounmap(dev, bus->mmio);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(bus);
+ pci_set_drvdata(dev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
+
+static struct pci_driver bcma_pci_bridge_driver = {
+ .name = "bcma-pci-bridge",
+ .id_table = bcma_pci_bridge_tbl,
+ .probe = bcma_host_pci_probe,
+ .remove = bcma_host_pci_remove,
+};
+
+int __init bcma_host_pci_init(void)
+{
+ return pci_register_driver(&bcma_pci_bridge_driver);
+}
+
+void __exit bcma_host_pci_exit(void)
+{
+ pci_unregister_driver(&bcma_pci_bridge_driver);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
new file mode 100644
index 0000000..be52344
--- /dev/null
+++ b/drivers/bcma/main.c
@@ -0,0 +1,247 @@
+/*
+ * Broadcom specific AMBA
+ * Bus subsystem
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+MODULE_LICENSE("GPL");
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+static int bcma_device_probe(struct device *dev);
+static int bcma_device_remove(struct device *dev);
+
+static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%03X\n", core->id.manuf);
+}
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%03X\n", core->id.id);
+}
+static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%02X\n", core->id.rev);
+}
+static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ return sprintf(buf, "0x%X\n", core->id.class);
+}
+static struct device_attribute bcma_device_attrs[] = {
+ __ATTR_RO(manuf),
+ __ATTR_RO(id),
+ __ATTR_RO(rev),
+ __ATTR_RO(class),
+ __ATTR_NULL,
+};
+
+static struct bus_type bcma_bus_type = {
+ .name = "bcma",
+ .match = bcma_bus_match,
+ .probe = bcma_device_probe,
+ .remove = bcma_device_remove,
+ .dev_attrs = bcma_device_attrs,
+};
+
+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ if (core->id.id == coreid)
+ return core;
+ }
+ return NULL;
+}
+
+static void bcma_release_core_dev(struct device *dev)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ kfree(core);
+}
+
+static int bcma_register_cores(struct bcma_bus *bus)
+{
+ struct bcma_device *core;
+ int err, dev_id = 0;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ /* We support that cores ourself */
+ switch (core->id.id) {
+ case BCMA_CORE_CHIPCOMMON:
+ case BCMA_CORE_PCI:
+ case BCMA_CORE_PCIE:
+ continue;
+ }
+
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
+
+ switch (bus->hosttype) {
+ case BCMA_HOSTTYPE_PCI:
+ core->dev.parent = &bus->host_pci->dev;
+ break;
+ case BCMA_HOSTTYPE_NONE:
+ case BCMA_HOSTTYPE_SDIO:
+ break;
+ }
+
+ err = device_register(&core->dev);
+ if (err) {
+ pr_err("Could not register dev for core 0x%03X\n",
+ core->id.id);
+ continue;
+ }
+ core->dev_registered = true;
+ dev_id++;
+ }
+
+ return 0;
+}
+
+static void bcma_unregister_cores(struct bcma_bus *bus)
+{
+ struct bcma_device *core;
+
+ list_for_each_entry(core, &bus->cores, list) {
+ if (core->dev_registered)
+ device_unregister(&core->dev);
+ }
+}
+
+int bcma_bus_register(struct bcma_bus *bus)
+{
+ int err;
+ struct bcma_device *core;
+
+ /* Scan for devices (cores) */
+ err = bcma_bus_scan(bus);
+ if (err) {
+ pr_err("Failed to scan: %d\n", err);
+ return -1;
+ }
+
+ /* Init CC core */
+ core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+ if (core) {
+ bus->drv_cc.core = core;
+ bcma_core_chipcommon_init(&bus->drv_cc);
+ }
+
+ /* Init PCIE core */
+ core = bcma_find_core(bus, BCMA_CORE_PCIE);
+ if (core) {
+ bus->drv_pci.core = core;
+ bcma_core_pci_init(&bus->drv_pci);
+ }
+
+ /* Register found cores */
+ bcma_register_cores(bus);
+
+ pr_info("Bus registered\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_bus_register);
+
+void bcma_bus_unregister(struct bcma_bus *bus)
+{
+ bcma_unregister_cores(bus);
+}
+EXPORT_SYMBOL_GPL(bcma_bus_unregister);
+
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+{
+ drv->drv.name = drv->name;
+ drv->drv.bus = &bcma_bus_type;
+ drv->drv.owner = owner;
+
+ return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(__bcma_driver_register);
+
+void bcma_driver_unregister(struct bcma_driver *drv)
+{
+ driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(bcma_driver_unregister);
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+ const struct bcma_device_id *cid = &core->id;
+ const struct bcma_device_id *did;
+
+ for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
+ if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
+ (did->id == cid->id || did->id == BCMA_ANY_ID) &&
+ (did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
+ (did->class == cid->class || did->class == BCMA_ANY_CLASS))
+ return 1;
+ }
+ return 0;
+}
+
+static int bcma_device_probe(struct device *dev)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+ drv);
+ int err = 0;
+
+ if (adrv->probe)
+ err = adrv->probe(core);
+
+ return err;
+}
+
+static int bcma_device_remove(struct device *dev)
+{
+ struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+ struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+ drv);
+
+ if (adrv->remove)
+ adrv->remove(core);
+
+ return 0;
+}
+
+static int __init bcma_modinit(void)
+{
+ int err;
+
+ err = bus_register(&bcma_bus_type);
+ if (err)
+ return err;
+
+#ifdef CONFIG_BCMA_HOST_PCI
+ err = bcma_host_pci_init();
+ if (err) {
+ pr_err("PCI host initialization failed\n");
+ err = 0;
+ }
+#endif
+
+ return err;
+}
+fs_initcall(bcma_modinit);
+
+static void __exit bcma_modexit(void)
+{
+#ifdef CONFIG_BCMA_HOST_PCI
+ bcma_host_pci_exit();
+#endif
+ bus_unregister(&bcma_bus_type);
+}
+module_exit(bcma_modexit)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
new file mode 100644
index 0000000..40d7dcc
--- /dev/null
+++ b/drivers/bcma/scan.c
@@ -0,0 +1,360 @@
+/*
+ * Broadcom specific AMBA
+ * Bus scanning
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "scan.h"
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct bcma_device_id_name {
+ u16 id;
+ const char *name;
+};
+struct bcma_device_id_name bcma_device_names[] = {
+ { BCMA_CORE_OOB_ROUTER, "OOB Router" },
+ { BCMA_CORE_INVALID, "Invalid" },
+ { BCMA_CORE_CHIPCOMMON, "ChipCommon" },
+ { BCMA_CORE_ILINE20, "ILine 20" },
+ { BCMA_CORE_SRAM, "SRAM" },
+ { BCMA_CORE_SDRAM, "SDRAM" },
+ { BCMA_CORE_PCI, "PCI" },
+ { BCMA_CORE_MIPS, "MIPS" },
+ { BCMA_CORE_ETHERNET, "Fast Ethernet" },
+ { BCMA_CORE_V90, "V90" },
+ { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
+ { BCMA_CORE_ADSL, "ADSL" },
+ { BCMA_CORE_ILINE100, "ILine 100" },
+ { BCMA_CORE_IPSEC, "IPSEC" },
+ { BCMA_CORE_UTOPIA, "UTOPIA" },
+ { BCMA_CORE_PCMCIA, "PCMCIA" },
+ { BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
+ { BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
+ { BCMA_CORE_OFDM, "OFDM" },
+ { BCMA_CORE_EXTIF, "EXTIF" },
+ { BCMA_CORE_80211, "IEEE 802.11" },
+ { BCMA_CORE_PHY_A, "PHY A" },
+ { BCMA_CORE_PHY_B, "PHY B" },
+ { BCMA_CORE_PHY_G, "PHY G" },
+ { BCMA_CORE_MIPS_3302, "MIPS 3302" },
+ { BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
+ { BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
+ { BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
+ { BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
+ { BCMA_CORE_SDIO_HOST, "SDIO Host" },
+ { BCMA_CORE_ROBOSWITCH, "Roboswitch" },
+ { BCMA_CORE_PARA_ATA, "PATA" },
+ { BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
+ { BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
+ { BCMA_CORE_PCIE, "PCIe" },
+ { BCMA_CORE_PHY_N, "PHY N" },
+ { BCMA_CORE_SRAM_CTL, "SRAM Controller" },
+ { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
+ { BCMA_CORE_ARM_1176, "ARM 1176" },
+ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+ { BCMA_CORE_PHY_LP, "PHY LP" },
+ { BCMA_CORE_PMU, "PMU" },
+ { BCMA_CORE_PHY_SSN, "PHY SSN" },
+ { BCMA_CORE_SDIO_DEV, "SDIO Device" },
+ { BCMA_CORE_ARM_CM3, "ARM CM3" },
+ { BCMA_CORE_PHY_HT, "PHY HT" },
+ { BCMA_CORE_MIPS_74K, "MIPS 74K" },
+ { BCMA_CORE_MAC_GBIT, "GBit MAC" },
+ { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
+ { BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
+ { BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
+ { BCMA_CORE_SHARED_COMMON, "Common Shared" },
+ { BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
+ { BCMA_CORE_SPI_HOST, "SPI Host" },
+ { BCMA_CORE_I2S, "I2S" },
+ { BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+ { BCMA_CORE_SHIM, "SHIM" },
+ { BCMA_CORE_DEFAULT, "Default" },
+};
+const char *bcma_device_name(struct bcma_device_id *id)
+{
+ int i;
+
+ if (id->manuf == BCMA_MANUF_BCM) {
+ for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
+ if (bcma_device_names[i].id == id->id)
+ return bcma_device_names[i].name;
+ }
+ }
+ return "UNKNOWN";
+}
+
+static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
+ u16 offset)
+{
+ return readl(bus->mmio + offset);
+}
+
+static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
+{
+ if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+ pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
+ addr);
+}
+
+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = readl(*eromptr);
+ (*eromptr)++;
+ return ent;
+}
+
+static void bcma_erom_push_ent(u32 **eromptr)
+{
+ (*eromptr)--;
+}
+
+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+ return -ENOENT;
+ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
+ return -ENOENT;
+ return ent;
+}
+
+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+}
+
+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ bcma_erom_push_ent(eromptr);
+ return (((ent & SCAN_ER_VALID)) &&
+ ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
+ ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+}
+
+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent;
+ while (1) {
+ ent = bcma_erom_get_ent(bus, eromptr);
+ if ((ent & SCAN_ER_VALID) &&
+ ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
+ break;
+ if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
+ break;
+ }
+ bcma_erom_push_ent(eromptr);
+}
+
+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
+{
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if (!(ent & SCAN_ER_VALID))
+ return -ENOENT;
+ if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
+ return -ENOENT;
+ return ent;
+}
+
+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
+ u32 type, u8 port)
+{
+ u32 addrl, addrh, sizel, sizeh = 0;
+ u32 size;
+
+ u32 ent = bcma_erom_get_ent(bus, eromptr);
+ if ((!(ent & SCAN_ER_VALID)) ||
+ ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
+ ((ent & SCAN_ADDR_TYPE) != type) ||
+ (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+ bcma_erom_push_ent(eromptr);
+ return -EINVAL;
+ }
+
+ addrl = ent & SCAN_ADDR_ADDR;
+ if (ent & SCAN_ADDR_AG32)
+ addrh = bcma_erom_get_ent(bus, eromptr);
+ else
+ addrh = 0;
+
+ if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
+ size = bcma_erom_get_ent(bus, eromptr);
+ sizel = size & SCAN_SIZE_SZ;
+ if (size & SCAN_SIZE_SG32)
+ sizeh = bcma_erom_get_ent(bus, eromptr);
+ } else
+ sizel = SCAN_ADDR_SZ_BASE <<
+ ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
+
+ return addrl;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+ u32 erombase;
+ u32 __iomem *eromptr, *eromend;
+
+ s32 cia, cib;
+ u8 ports[2], wrappers[2];
+
+ s32 tmp;
+ u8 i, j;
+
+ int err;
+
+ INIT_LIST_HEAD(&bus->cores);
+ bus->nr_cores = 0;
+
+ bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
+
+ tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+
+ erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+ eromptr = bus->mmio;
+ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+ bcma_scan_switch_core(bus, erombase);
+
+ while (eromptr < eromend) {
+ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
+ if (!core)
+ return -ENOMEM;
+ INIT_LIST_HEAD(&core->list);
+ core->bus = bus;
+
+ /* get CIs */
+ cia = bcma_erom_get_ci(bus, &eromptr);
+ if (cia < 0) {
+ bcma_erom_push_ent(&eromptr);
+ if (bcma_erom_is_end(bus, &eromptr))
+ break;
+ err= -EILSEQ;
+ goto out;
+ }
+ cib = bcma_erom_get_ci(bus, &eromptr);
+ if (cib < 0) {
+ err= -EILSEQ;
+ goto out;
+ }
+
+ /* parse CIs */
+ core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+ core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+ core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+ ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+ ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+ wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+ wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+ core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+ if (((core->id.manuf == BCMA_MANUF_ARM) &&
+ (core->id.id == 0xFFF)) ||
+ (ports[1] == 0)) {
+ bcma_erom_skip_component(bus, &eromptr);
+ continue;
+ }
+
+ /* check if component is a core at all */
+ if (wrappers[0] + wrappers[1] == 0) {
+ /* we could save addrl of the router
+ if (cid == BCMA_CORE_OOB_ROUTER)
+ */
+ bcma_erom_skip_component(bus, &eromptr);
+ continue;
+ }
+
+ if (bcma_erom_is_bridge(bus, &eromptr)) {
+ bcma_erom_skip_component(bus, &eromptr);
+ continue;
+ }
+
+ /* get & parse master ports */
+ for (i = 0; i < ports[0]; i++) {
+ u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+ if (mst_port_d < 0) {
+ err= -EILSEQ;
+ goto out;
+ }
+ }
+
+ /* get & parse slave ports */
+ for (i = 0; i < ports[1]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+ SCAN_ADDR_TYPE_SLAVE, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: slave port %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->addr = tmp;
+ }
+ }
+ }
+
+ /* get & parse master wrappers */
+ for (i = 0; i < wrappers[0]; i++) {
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+ SCAN_ADDR_TYPE_MWRAP, i);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * "has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (i == 0 && j == 0)
+ core->wrap = tmp;
+ }
+ }
+ }
+
+ /* get & parse slave wrappers */
+ for (i = 0; i < wrappers[1]; i++) {
+ u8 hack = (ports[1] == 1) ? 0 : 1;
+ for (j = 0; ; j++) {
+ tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+ SCAN_ADDR_TYPE_SWRAP, i + hack);
+ if (tmp < 0) {
+ /* no more entries for port _i_ */
+ /* pr_debug("erom: master wrapper %d "
+ * has %d descriptors\n", i, j); */
+ break;
+ } else {
+ if (wrappers[0] == 0 && !i && !j)
+ core->wrap = tmp;
+ }
+ }
+ }
+
+ pr_info("Core %d found: %s "
+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ bus->nr_cores, bcma_device_name(&core->id),
+ core->id.manuf, core->id.id, core->id.rev,
+ core->id.class);
+
+ core->core_index = bus->nr_cores++;
+ list_add(&core->list, &bus->cores);
+ continue;
+out:
+ return err;
+ }
+
+ return 0;
+}
diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h
new file mode 100644
index 0000000..113e6a6
--- /dev/null
+++ b/drivers/bcma/scan.h
@@ -0,0 +1,56 @@
+#ifndef BCMA_SCAN_H_
+#define BCMA_SCAN_H_
+
+#define BCMA_ADDR_BASE 0x18000000
+#define BCMA_WRAP_BASE 0x18100000
+
+#define SCAN_ER_VALID 0x00000001
+#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
+#define SCAN_ER_TAG 0x0000000E
+#define SCAN_ER_TAG_CI 0x00000000
+#define SCAN_ER_TAG_MP 0x00000002
+#define SCAN_ER_TAG_ADDR 0x00000004
+#define SCAN_ER_TAG_END 0x0000000E
+#define SCAN_ER_BAD 0xFFFFFFFF
+
+#define SCAN_CIA_CLASS 0x000000F0
+#define SCAN_CIA_CLASS_SHIFT 4
+#define SCAN_CIA_ID 0x000FFF00
+#define SCAN_CIA_ID_SHIFT 8
+#define SCAN_CIA_MANUF 0xFFF00000
+#define SCAN_CIA_MANUF_SHIFT 20
+
+#define SCAN_CIB_NMP 0x000001F0
+#define SCAN_CIB_NMP_SHIFT 4
+#define SCAN_CIB_NSP 0x00003E00
+#define SCAN_CIB_NSP_SHIFT 9
+#define SCAN_CIB_NMW 0x0007C000
+#define SCAN_CIB_NMW_SHIFT 14
+#define SCAN_CIB_NSW 0x00F80000
+#define SCAN_CIB_NSW_SHIFT 17
+#define SCAN_CIB_REV 0xFF000000
+#define SCAN_CIB_REV_SHIFT 24
+
+#define SCAN_ADDR_AG32 0x00000008
+#define SCAN_ADDR_SZ 0x00000030
+#define SCAN_ADDR_SZ_SHIFT 4
+#define SCAN_ADDR_SZ_4K 0x00000000
+#define SCAN_ADDR_SZ_8K 0x00000010
+#define SCAN_ADDR_SZ_16K 0x00000020
+#define SCAN_ADDR_SZ_SZD 0x00000030
+#define SCAN_ADDR_TYPE 0x000000C0
+#define SCAN_ADDR_TYPE_SLAVE 0x00000000
+#define SCAN_ADDR_TYPE_BRIDGE 0x00000040
+#define SCAN_ADDR_TYPE_SWRAP 0x00000080
+#define SCAN_ADDR_TYPE_MWRAP 0x000000C0
+#define SCAN_ADDR_PORT 0x00000F00
+#define SCAN_ADDR_PORT_SHIFT 8
+#define SCAN_ADDR_ADDR 0xFFFFF000
+
+#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */
+
+#define SCAN_SIZE_SZ_ALIGN 0x00000FFF
+#define SCAN_SIZE_SZ 0xFFFFF000
+#define SCAN_SIZE_SG32 0x00000008
+
+#endif /* BCMA_SCAN_H_ */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 0000000..08763e4
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+ BCMA_HOSTTYPE_NONE,
+ BCMA_HOSTTYPE_PCI,
+ BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+ u16 id;
+ u8 rev;
+ u8 pkg;
+};
+
+struct bcma_host_ops {
+ u8 (*read8)(struct bcma_device *core, u16 offset);
+ u16 (*read16)(struct bcma_device *core, u16 offset);
+ u32 (*read32)(struct bcma_device *core, u16 offset);
+ void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+ void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+ void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+ /* Agent ops */
+ u32 (*aread32)(struct bcma_device *core, u16 offset);
+ void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM 0x43B
+#define BCMA_MANUF_MIPS 0x4A7
+#define BCMA_MANUF_BCM 0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM 0x0
+#define BCMA_CL_EROM 0x1
+#define BCMA_CL_CORESIGHT 0x9
+#define BCMA_CL_VERIF 0xB
+#define BCMA_CL_OPTIMO 0xD
+#define BCMA_CL_GEN 0xE
+#define BCMA_CL_PRIMECELL 0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */
+#define BCMA_CORE_INVALID 0x700
+#define BCMA_CORE_CHIPCOMMON 0x800
+#define BCMA_CORE_ILINE20 0x801
+#define BCMA_CORE_SRAM 0x802
+#define BCMA_CORE_SDRAM 0x803
+#define BCMA_CORE_PCI 0x804
+#define BCMA_CORE_MIPS 0x805
+#define BCMA_CORE_ETHERNET 0x806
+#define BCMA_CORE_V90 0x807
+#define BCMA_CORE_USB11_HOSTDEV 0x808
+#define BCMA_CORE_ADSL 0x809
+#define BCMA_CORE_ILINE100 0x80A
+#define BCMA_CORE_IPSEC 0x80B
+#define BCMA_CORE_UTOPIA 0x80C
+#define BCMA_CORE_PCMCIA 0x80D
+#define BCMA_CORE_INTERNAL_MEM 0x80E
+#define BCMA_CORE_MEMC_SDRAM 0x80F
+#define BCMA_CORE_OFDM 0x810
+#define BCMA_CORE_EXTIF 0x811
+#define BCMA_CORE_80211 0x812
+#define BCMA_CORE_PHY_A 0x813
+#define BCMA_CORE_PHY_B 0x814
+#define BCMA_CORE_PHY_G 0x815
+#define BCMA_CORE_MIPS_3302 0x816
+#define BCMA_CORE_USB11_HOST 0x817
+#define BCMA_CORE_USB11_DEV 0x818
+#define BCMA_CORE_USB20_HOST 0x819
+#define BCMA_CORE_USB20_DEV 0x81A
+#define BCMA_CORE_SDIO_HOST 0x81B
+#define BCMA_CORE_ROBOSWITCH 0x81C
+#define BCMA_CORE_PARA_ATA 0x81D
+#define BCMA_CORE_SATA_XORDMA 0x81E
+#define BCMA_CORE_ETHERNET_GBIT 0x81F
+#define BCMA_CORE_PCIE 0x820
+#define BCMA_CORE_PHY_N 0x821
+#define BCMA_CORE_SRAM_CTL 0x822
+#define BCMA_CORE_MINI_MACPHY 0x823
+#define BCMA_CORE_ARM_1176 0x824
+#define BCMA_CORE_ARM_7TDMI 0x825
+#define BCMA_CORE_PHY_LP 0x826
+#define BCMA_CORE_PMU 0x827
+#define BCMA_CORE_PHY_SSN 0x828
+#define BCMA_CORE_SDIO_DEV 0x829
+#define BCMA_CORE_ARM_CM3 0x82A
+#define BCMA_CORE_PHY_HT 0x82B
+#define BCMA_CORE_MIPS_74K 0x82C
+#define BCMA_CORE_MAC_GBIT 0x82D
+#define BCMA_CORE_DDR12_MEM_CTL 0x82E
+#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE 0x830
+#define BCMA_CORE_SHARED_COMMON 0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE 0x832
+#define BCMA_CORE_SPI_HOST 0x833
+#define BCMA_CORE_I2S 0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT 0xFFF
+
+#define BCMA_MAX_NR_CORES 16
+
+struct bcma_device {
+ struct bcma_bus *bus;
+ struct bcma_device_id id;
+
+ struct device dev;
+ bool dev_registered;
+
+ u8 core_index;
+
+ u32 addr;
+ u32 wrap;
+
+ void *drvdata;
+ struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+ return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+ core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+ const char *name;
+ const struct bcma_device_id *id_table;
+
+ int (*probe)(struct bcma_device *dev);
+ void (*remove)(struct bcma_device *dev);
+ int (*suspend)(struct bcma_device *dev, pm_message_t state);
+ int (*resume)(struct bcma_device *dev);
+ void (*shutdown)(struct bcma_device *dev);
+
+ struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+ return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+ /* The MMIO area. */
+ void __iomem *mmio;
+
+ const struct bcma_host_ops *ops;
+
+ enum bcma_hosttype hosttype;
+ union {
+ /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+ struct pci_dev *host_pci;
+ /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+ struct sdio_func *host_sdio;
+ };
+
+ struct bcma_chipinfo chipinfo;
+
+ struct bcma_device *mapped_core;
+ struct list_head cores;
+ u8 nr_cores;
+
+ struct bcma_drv_cc drv_cc;
+ struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+ return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+ core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 0000000..4f8fd6a
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,297 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID 0x0000
+#define BCMA_CC_ID_ID 0x0000FFFF
+#define BCMA_CC_ID_ID_SHIFT 0
+#define BCMA_CC_ID_REV 0x000F0000
+#define BCMA_CC_ID_REV_SHIFT 16
+#define BCMA_CC_ID_PKG 0x00F00000
+#define BCMA_CC_ID_PKG_SHIFT 20
+#define BCMA_CC_ID_NRCORES 0x0F000000
+#define BCMA_CC_ID_NRCORES_SHIFT 24
+#define BCMA_CC_ID_TYPE 0xF0000000
+#define BCMA_CC_ID_TYPE_SHIFT 28
+#define BCMA_CC_CAP 0x0004 /* Capabilities */
+#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */
+#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
+#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */
+#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
+#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
+#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */
+#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */
+#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */
+#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */
+#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
+#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */
+#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */
+#define BCMA_PLLTYPE_NONE 0x00000000
+#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
+#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
+#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
+#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
+#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
+#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
+#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
+#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */
+#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */
+#define BCMA_CC_CAP_OTPS_SHIFT 19
+#define BCMA_CC_CAP_OTPS_BASE 5
+#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */
+#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */
+#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */
+#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */
+#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */
+#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */
+#define BCMA_CC_CORECTL 0x0008
+#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
+#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
+#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST 0x000C
+#define BCMA_CC_OTPS 0x0010 /* OTP status */
+#define BCMA_CC_OTPS_PROGFAIL 0x80000000
+#define BCMA_CC_OTPS_PROTECT 0x00000007
+#define BCMA_CC_OTPS_HW_PROTECT 0x00000001
+#define BCMA_CC_OTPS_SW_PROTECT 0x00000002
+#define BCMA_CC_OTPS_CID_PROTECT 0x00000004
+#define BCMA_CC_OTPC 0x0014 /* OTP control */
+#define BCMA_CC_OTPC_RECWAIT 0xFF000000
+#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00
+#define BCMA_CC_OTPC_PRW_SHIFT 8
+#define BCMA_CC_OTPC_MAXFAIL 0x00000038
+#define BCMA_CC_OTPC_VSEL 0x00000006
+#define BCMA_CC_OTPC_SELVL 0x00000001
+#define BCMA_CC_OTPP 0x0018 /* OTP prog */
+#define BCMA_CC_OTPP_COL 0x000000FF
+#define BCMA_CC_OTPP_ROW 0x0000FF00
+#define BCMA_CC_OTPP_ROW_SHIFT 8
+#define BCMA_CC_OTPP_READERR 0x10000000
+#define BCMA_CC_OTPP_VALUE 0x20000000
+#define BCMA_CC_OTPP_READ 0x40000000
+#define BCMA_CC_OTPP_START 0x80000000
+#define BCMA_CC_OTPP_BUSY 0x80000000
+#define BCMA_CC_IRQSTAT 0x0020
+#define BCMA_CC_IRQMASK 0x0024
+#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */
+#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
+#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */
+#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
+#define BCMA_CC_JCMD_START 0x80000000
+#define BCMA_CC_JCMD_BUSY 0x80000000
+#define BCMA_CC_JCMD_PAUSE 0x40000000
+#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000
+#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000
+#define BCMA_CC_JCMD0_ACC_DR 0x00001000
+#define BCMA_CC_JCMD0_ACC_IR 0x00002000
+#define BCMA_CC_JCMD0_ACC_RESET 0x00003000
+#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000
+#define BCMA_CC_JCMD0_ACC_PDR 0x00005000
+#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00
+#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
+#define BCMA_CC_JCMD_ACC_IRDR 0x00000000
+#define BCMA_CC_JCMD_ACC_DR 0x00010000
+#define BCMA_CC_JCMD_ACC_IR 0x00020000
+#define BCMA_CC_JCMD_ACC_RESET 0x00030000
+#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000
+#define BCMA_CC_JCMD_ACC_PDR 0x00050000
+#define BCMA_CC_JCMD_IRW_MASK 0x00001F00
+#define BCMA_CC_JCMD_IRW_SHIFT 8
+#define BCMA_CC_JCMD_DRW_MASK 0x0000003F
+#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */
+#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */
+#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */
+#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */
+#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */
+#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */
+#define BCMA_CC_FLASHCTL 0x0040
+#define BCMA_CC_FLASHCTL_START 0x80000000
+#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR 0x0044
+#define BCMA_CC_FLASHDATA 0x0048
+#define BCMA_CC_BCAST_ADDR 0x0050
+#define BCMA_CC_BCAST_DATA 0x0054
+#define BCMA_CC_GPIOIN 0x0060
+#define BCMA_CC_GPIOOUT 0x0064
+#define BCMA_CC_GPIOOUTEN 0x0068
+#define BCMA_CC_GPIOCTL 0x006C
+#define BCMA_CC_GPIOPOL 0x0070
+#define BCMA_CC_GPIOIRQ 0x0074
+#define BCMA_CC_WATCHDOG 0x0080
+#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
+#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16
+#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N 0x0090
+#define BCMA_CC_CLOCK_SB 0x0094
+#define BCMA_CC_CLOCK_PCI 0x0098
+#define BCMA_CC_CLOCK_M2 0x009C
+#define BCMA_CC_CLOCK_MIPS 0x00A0
+#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */
+#define BCMA_CC_CLKDIV_SFLASH 0x0F000000
+#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24
+#define BCMA_CC_CLKDIV_OTP 0x000F0000
+#define BCMA_CC_CLKDIV_OTP_SHIFT 16
+#define BCMA_CC_CLKDIV_JTAG 0x00000F00
+#define BCMA_CC_CLKDIV_JTAG_SHIFT 8
+#define BCMA_CC_CLKDIV_UART 0x000000FF
+#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */
+#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
+#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
+#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
+#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
+#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
+#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
+#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16
+#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
+#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
+#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
+#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
+#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
+#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
+#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
+#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16
+#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */
+#define BCMA_CC_EROM 0x00FC
+#define BCMA_CC_PCMCIA_CFG 0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT 0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108
+#define BCMA_CC_PCMCIA_IOWAIT 0x010C
+#define BCMA_CC_IDE_CFG 0x0110
+#define BCMA_CC_IDE_MEMWAIT 0x0114
+#define BCMA_CC_IDE_ATTRWAIT 0x0118
+#define BCMA_CC_IDE_IOWAIT 0x011C
+#define BCMA_CC_PROG_CFG 0x0120
+#define BCMA_CC_PROG_WAITCNT 0x0124
+#define BCMA_CC_FLASH_CFG 0x0128
+#define BCMA_CC_FLASH_WAITCNT 0x012C
+#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
+#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
+#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
+#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
+#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
+#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
+#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
+#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */
+#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA 0x0300
+#define BCMA_CC_UART0_IMR 0x0304
+#define BCMA_CC_UART0_FCR 0x0308
+#define BCMA_CC_UART0_LCR 0x030C
+#define BCMA_CC_UART0_MCR 0x0310
+#define BCMA_CC_UART0_LSR 0x0314
+#define BCMA_CC_UART0_MSR 0x0318
+#define BCMA_CC_UART0_SCRATCH 0x031C
+#define BCMA_CC_UART1_DATA 0x0400
+#define BCMA_CC_UART1_IMR 0x0404
+#define BCMA_CC_UART1_FCR 0x0408
+#define BCMA_CC_UART1_LCR 0x040C
+#define BCMA_CC_UART1_MCR 0x0410
+#define BCMA_CC_UART1_LSR 0x0414
+#define BCMA_CC_UART1_MSR 0x0418
+#define BCMA_CC_UART1_SCRATCH 0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */
+#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
+#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16
+#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
+#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
+#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
+#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
+#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2
+#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
+#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */
+#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */
+#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
+#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
+#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
+#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */
+#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR 0x0650
+#define BCMA_CC_CHIPCTL_DATA 0x0654
+#define BCMA_CC_REGCTL_ADDR 0x0658
+#define BCMA_CC_REGCTL_DATA 0x065C
+#define BCMA_CC_PLLCTL_ADDR 0x0660
+#define BCMA_CC_PLLCTL_DATA 0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+ u8 rev; /* PMU revision */
+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+ struct bcma_device *core;
+ u32 status;
+ u32 capabilities;
+ u32 capabilities_ext;
+ /* Fast Powerup Delay constant */
+ u16 fast_pwrup_delay;
+ struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+ bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+ bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+ bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+ bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+ u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 0000000..b7e191c
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */
+#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */
+#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */
+#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */
+#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */
+#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */
+#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */
+#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */
+#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */
+#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */
+#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */
+#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */
+#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */
+#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */
+#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */
+#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */
+#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */
+#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */
+#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */
+#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */
+#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */
+#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */
+#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */
+#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */
+#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */
+#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000
+#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */
+#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+ struct bcma_device *core;
+ u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 0000000..f82d88a
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL 0x0408
+#define BCMA_IOCTL_CLK 0x0001
+#define BCMA_IOCTL_FGC 0x0002
+#define BCMA_IOCTL_CORE_BITS 0x3FFC
+#define BCMA_IOCTL_PME_EN 0x4000
+#define BCMA_IOCTL_BIST_EN 0x8000
+#define BCMA_RESET_CTL 0x0800
+#define BCMA_RESET_CTL_RESET 0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR 0x44
+#define BCMA_PCI_PE 0x100
+#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */
+#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */
+#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */
+#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2 0xAC
+#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
+#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
+#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
+#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48c007d..ae28e93 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -382,6 +382,23 @@ struct ssb_device_id {
#define SSB_ANY_ID 0xFFFF
#define SSB_ANY_REV 0xFF

+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+ __u16 manuf;
+ __u16 id;
+ __u8 rev;
+ __u8 class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class) \
+ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END \
+ { 0, },
+
+#define BCMA_ANY_MANUF 0xFFFF
+#define BCMA_ANY_ID 0xFFFF
+#define BCMA_ANY_REV 0xFF
+#define BCMA_ANY_CLASS 0xFF
+
struct virtio_device_id {
__u32 device;
__u32 vendor;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 88f3f07..e26e2fb 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -702,6 +702,24 @@ static int do_ssb_entry(const char *filename,
return 1;
}

+/* Looks like: bcma:mNidNrevNclN. */
+static int do_bcma_entry(const char *filename,
+ struct bcma_device_id *id, char *alias)
+{
+ id->manuf = TO_NATIVE(id->manuf);
+ id->id = TO_NATIVE(id->id);
+ id->rev = TO_NATIVE(id->rev);
+ id->class = TO_NATIVE(id->class);
+
+ strcpy(alias, "bcma:");
+ ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
+ ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
+ ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
+ ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
+ add_wildcard(alias);
+ return 1;
+}
+
/* Looks like: virtio:dNvN */
static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
char *alias)
@@ -968,6 +986,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
do_table(symval, sym->st_size,
sizeof(struct ssb_device_id), "ssb",
do_ssb_entry, mod);
+ else if (sym_is(symname, "__mod_bcma_device_table"))
+ do_table(symval, sym->st_size,
+ sizeof(struct bcma_device_id), "bcma",
+ do_bcma_entry, mod);
else if (sym_is(symname, "__mod_virtio_device_table"))
do_table(symval, sym->st_size,
sizeof(struct virtio_device_id), "virtio",
--
1.7.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-05-09 18:21    [W:2.640 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site