lkml.org 
[lkml]   [2011]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] [RFC] usb: Broaden range of vendor codes for xhci
Date
My asrock P67 chipset sends code 192 on device reset. Allowing >= 192 to be treated as success fixes it, and allows me to use my USB3 port.

Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>

---
There still appears to be a possible regression though. I can't currently use my usb headset, but since my xhci port never worked, I can't tell for sure if it ever worked.

Resending, forgot to add relevant maintainers.
---
drivers/usb/host/xhci-ring.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7437386..f8b9f79 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1464,7 +1464,7 @@ static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,

int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
{
- if (trb_comp_code >= 224 && trb_comp_code <= 255) {
+ if (trb_comp_code >= 192 && trb_comp_code <= 255) {
/* Vendor defined "informational" completion code,
* treat as not-an-error.
*/
--
1.7.4.1


\
 
 \ /
  Last update: 2011-05-30 11:59    [W:0.044 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site