lkml.org 
[lkml]   [2011]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] leds: Add ASIC3 LED support
From
Date
Hi Paul,

Am Samstag, den 30.04.2011, 17:59 +0000 schrieb Paul Parsons:
> Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.
> Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
> ---
> diff -uprN clean-2.6.39-rc5/drivers/leds/Kconfig linux-2.6.39-rc5/drivers/leds/Kconfig
> --- clean-2.6.39-rc5/drivers/leds/Kconfig 2011-04-28 11:18:14.818578777 +0100
> +++ linux-2.6.39-rc5/drivers/leds/Kconfig 2011-04-30 16:39:48.434871549 +0100
> @@ -379,6 +379,16 @@ config LEDS_NETXBIG
> and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
> controlled through a GPIO extension bus.
>
> +config LEDS_ASIC3
> + bool "LED support for the HTC ASIC3"
> + depends on MFD_ASIC3
> + default y
> + help
> + This option enables support for the LEDs on the HTC ASIC3. The HTC
> + ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
> + cannot be used. This driver supports hardware blinking with an on+off
> + period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
> +
> config LEDS_TRIGGERS
> bool "LED Trigger support"
> depends on LEDS_CLASS
> diff -uprN clean-2.6.39-rc5/drivers/leds/Makefile linux-2.6.39-rc5/drivers/leds/Makefile
> --- clean-2.6.39-rc5/drivers/leds/Makefile 2011-04-28 11:18:14.818578777 +0100
> +++ linux-2.6.39-rc5/drivers/leds/Makefile 2011-04-30 15:44:30.288890098 +0100
> @@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell
> obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
> obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
> obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> +obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
>
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> diff -uprN clean-2.6.39-rc5/drivers/leds/leds-asic3.c linux-2.6.39-rc5/drivers/leds/leds-asic3.c
> --- clean-2.6.39-rc5/drivers/leds/leds-asic3.c 1970-01-01 01:00:00.000000000 +0100
> +++ linux-2.6.39-rc5/drivers/leds/leds-asic3.c 2011-04-30 16:39:41.066821912 +0100
> @@ -0,0 +1,167 @@
> +/*
> + * Copyright (C) 2011 Paul Parsons <lost.distance@yahoo.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/slab.h>
> +
> +#include <linux/mfd/asic3.h>
> +#include <linux/mfd/core.h>
> +
> +/*
> + * The HTC ASIC3 LED GPIOs are inputs, not outputs.
> + * Hence we turn the LEDs on/off via the TimeBase register.
> + */

About this, see the other patch I sent. This should work with the GPIOs
configured as outputs.

> +
> +/*
> + * When TimeBase is 4 the clock resolution is about 32Hz.
> + * This driver supports hardware blinking with an on+off
> + * period from 62ms (2 clocks) to 125s (4000 clocks).
> + */
> +#define MS_TO_CLK(ms) ((((ms)*1024)+16000)/32000) /* Round to nearest */

I'd just use DIV_ROUND_CLOSEST((ms)*1024, 32000) here.

> +#define CLK_TO_MS(clk) (((clk)*32000)/1024)
> +#define MAX_CLK 4000 /* Fits into 12-bit Time registers */
> +#define MAX_MS CLK_TO_MS(MAX_CLK)
> +
> +static const unsigned int led_n_base[ASIC3_NUM_LEDS] = {
> + [0] = ASIC3_LED_0_Base,
> + [1] = ASIC3_LED_1_Base,
> + [2] = ASIC3_LED_2_Base,
> +};

Could be moved into struct resource definitions in asic3.c.
Get to them with platform_get_resource() in asic3_led_probe().
After calculating the bus shift from the resource size, you have
everything you need to get rid of the asic3_write_register() export.

> +static void brightness_set(struct led_classdev *cdev,
> + enum led_brightness value)
> +{
> + struct platform_device *pdev = to_platform_device(cdev->dev->parent);
> + const struct mfd_cell *cell = mfd_get_cell(pdev);
> + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
> + u32 timebase;
> + unsigned int base;
> +
> + timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4);
> +
> + base = led_n_base[cell->id];
> + asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32);
> + asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32);
> + asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
> + asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase);
> +}
> +
> +static int blink_set(struct led_classdev *cdev,
> + unsigned long *delay_on,
> + unsigned long *delay_off)
> +{
> + struct platform_device *pdev = to_platform_device(cdev->dev->parent);
> + const struct mfd_cell *cell = mfd_get_cell(pdev);
> + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
> + u32 on;
> + u32 off;
> + unsigned int base;
> +
> + if (*delay_on > MAX_MS || *delay_off > MAX_MS)
> + return -EINVAL;
> +
> + if (*delay_on == 0 && *delay_off == 0) {
> + /* If both are zero then a sensible default should be chosen */
> + on = MS_TO_CLK(500);
> + off = MS_TO_CLK(500);
> + } else {
> + on = MS_TO_CLK(*delay_on);
> + off = MS_TO_CLK(*delay_off);
> + if ((on + off) > MAX_CLK)
> + return -EINVAL;
> + }
> +
> + base = led_n_base[cell->id];
> + asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off));
> + asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on);
> + asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0);
> + asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4));
> +
> + *delay_on = CLK_TO_MS(on);
> + *delay_off = CLK_TO_MS(off);
> +
> + return 0;
> +}
> +
> +static int __devinit asic3_led_probe(struct platform_device *pdev)
> +{
> + struct asic3_led *led = mfd_get_data(pdev);
> + int ret;
> +
> + ret = mfd_cell_enable(pdev);
> + if (ret < 0)
> + goto ret0;
> +
> + led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL);
> + if (!led->cdev) {
> + ret = -ENOMEM;
> + goto ret1;
> + }
> +
> + led->cdev->name = led->name;
> + led->cdev->default_trigger = led->default_trigger;
> + led->cdev->brightness_set = brightness_set;
> + led->cdev->blink_set = blink_set;
> +
> + ret = led_classdev_register(&pdev->dev, led->cdev);
> + if (ret < 0)
> + goto ret2;
> +
> + return 0;
> +
> +ret2:
> + kfree(led->cdev);
> +ret1:
> + (void) mfd_cell_disable(pdev);
> +ret0:
> + return ret;
> +}
> +
> +static int __devexit asic3_led_remove(struct platform_device *pdev)
> +{
> + struct asic3_led *led = mfd_get_data(pdev);
> +
> + led_classdev_unregister(led->cdev);
> +
> + kfree(led->cdev);
> +
> + (void) mfd_cell_disable(pdev);
> +
> + return 0;

Why not just return mfd_cell_disable(pdev);?

> +}
> +
> +static struct platform_driver asic3_led_driver = {
> + .probe = asic3_led_probe,
> + .remove = __devexit_p(asic3_led_remove),
> + .driver = {
> + .name = "leds-asic3",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +MODULE_ALIAS("platform:leds-asic3");
> +
> +static int __init asic3_led_init(void)
> +{
> + return platform_driver_register(&asic3_led_driver);
> +}
> +
> +static void __exit asic3_led_exit(void)
> +{
> + platform_driver_unregister(&asic3_led_driver);
> +}
> +
> +module_init(asic3_led_init);
> +module_exit(asic3_led_exit);
> +
> +MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
> +MODULE_DESCRIPTION("HTC ASIC3 LED driver");
> +MODULE_LICENSE("GPL");
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

regards
Philipp



\
 
 \ /
  Last update: 2011-05-03 13:21    [from the cache]
©2003-2011 Jasper Spaans