lkml.org 
[lkml]   [2011]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Linux 2.6.39
From
On Thu, May 26, 2011 at 4:37 AM, Ville Tervo <ville.tervo@nokia.com> wrote:
> On Wed, May 25, 2011 at 09:11:19PM -0400, ext Corey Boyle wrote:
>> On Wed, May 25, 2011 at 12:31 PM, Tom Allebrandi <wyrles@ytram.com> wrote:
>> > -----Original Message-----
>> > From: linux-bluetooth-owner@vger.kernel.org
>> > [mailto:linux-bluetooth-owner@vger.kernel.org] On Behalf Of Cufi, Carles
>> > Sent: Wednesday, May 25, 2011 7:15 AM
>> > To: corey@kansanian.com
>> > Cc: Ed Tomlinson; Ville Tervo; Bluettooth Linux;
>> > linux-kernel@vger.kernel.org
>> > Subject: RE: Linux 2.6.39
>> >
>> > (Snipping...)
>> > On Wed, May 25, 2011 at 8:46 AM, Cufi, Carles <carles.cufi@nordicsemi.no>
>> > wrote:
>> >> On Wednesday 25 May 2011 07:36:14 Ville Tervo wrote:
>> >>> On Wed, May 25, 2011 at 07:11:17AM -0400, ext Ed Tomlinson wrote:
>> >>> > On Wednesday 25 May 2011 06:54:54 Corey Boyle wrote:
>> >>> > > > On Mon, May 23, 2011 at 06:08:36PM -0400, ext Ed Tomlinson wrote:
>> >>> > > > > On Saturday 21 May 2011 16:31:00 Ed Tomlinson wrote:
>> >>> > > > > > On Saturday 21 May 2011 13:56:20 Milan Oravec wrote:
>> > ...
>> >>> > Read Local Version Information (0x04|0x0001) plen 0
>> >>> > > HCI Event: Command Complete (0x0e) plen 12
>> >>> >     Read Local Version Information (0x04|0x0001) ncmd 1
>> >>> >     status 0x00
>> >>> >     HCI Version: 1.1 (0x1) HCI Revision: 0x20d
>> > *************************
>> >>> >     LMP Version: 1.1 (0x1) LMP Subversion: 0x20d
>> > *************************
>> >>> >     Manufacturer: Cambridge Silicon Radio (10) < HCI Command: Set
>> >>> > Event Mask (0x03|0x0001) plen 8
>> >>> >     Mask: 0xfffffbff00000000
>> > *************************
>> >>> > > HCI Event: Command Complete (0x0e) plen 4
>> >>> >     Set Event Mask (0x03|0x0001) ncmd 1
>> >>> >     status 0x12
>> >>> >     Error: Invalid HCI Command Parameters
>> >>
>> >>Set Event Mask has been in the Bluetooth Spec since day 1, so it must be
>> > the bitmask, which has been extended with each new spec release to cover
>> > newly >added events. Looking at the latest spec, and judging by the year
>> > your chipset was released in (it probably is a 1.1 compliant chipset) I
>> > believe that >0x000000008FFFFFFF is the highest event mask it would support
>> > (up until and including Page Scan Repetition Mode Change Event), but since I
>> > don't have the >old 1.1 spec around I may be one or two bits off.
>> >
>> > The device appears to have identified itself as CSR firmware using Bluetooth
>> > version 1.1.
>> >
>> > I do happen to have the 1.1 spec lying around :-), for Set_Event_Mask it
>> > says
>> >
>> > 0x0000000100000000
>> > To                                          Reserved for future use
>> > 0x8000000000000000
>> >
>> > 0x00000000FFFFFFFF      Default (All events enabled)
>> >
>>
>> I am beginning to think that my adapter simply does not support this
>> command.  I have tried with all the suggested bitmasks, all zeros, all
>> ones, all combinations where a single bit is set, etc.  I'm not sure
>> where to go from here other than add a flag which incidates that
>> certain devices don't support this command so it can be skipped.
>> Again, the only way I have gotten it to work is by not sending the
>> command at all.  Thoughts?
>
> I also played a bit with 1.1 CSR dongle and couldn't find any mask that would
> be accepted. I think this command can be left out for older than 1.2 devices.
>
> Following patch should do it. Could you verify it. I don't have access to old
> hw ATM.
>
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index 19cd4af..86d1e26 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -477,14 +477,16 @@ static void hci_setup_event_mask(struct hci_dev *hdev)
>         * command otherwise */
>        u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 };
>
> -       /* Events for 1.2 and newer controllers */
> -       if (hdev->lmp_ver > 1) {
> -               events[4] |= 0x01; /* Flow Specification Complete */
> -               events[4] |= 0x02; /* Inquiry Result with RSSI */
> -               events[4] |= 0x04; /* Read Remote Extended Features Complete */
> -               events[5] |= 0x08; /* Synchronous Connection Complete */
> -               events[5] |= 0x10; /* Synchronous Connection Changed */
> -       }
> +       /* CSR 1.1 dongles does not accept any bitfield so don't try to set
> +        * any event mask for pre 1.2 devices */
> +       if (hdev->lmp_ver <= 1)
> +               return;
> +
> +       events[4] |= 0x01; /* Flow Specification Complete */
> +       events[4] |= 0x02; /* Inquiry Result with RSSI */
> +       events[4] |= 0x04; /* Read Remote Extended Features Complete */
> +       events[5] |= 0x08; /* Synchronous Connection Complete */
> +       events[5] |= 0x10; /* Synchronous Connection Changed */
>
>        if (hdev->features[3] & LMP_RSSI_INQ)
>                events[4] |= 0x04; /* Inquiry Result with RSSI */
> --
>
>

Patch works great - typing this email from my bluetooth keyboard.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-05-26 12:19    [W:0.054 / U:6.400 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site