lkml.org 
[lkml]   [2011]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: I have a blaze of 353 page allocation failures, all alike
Hi Christoph,

On 05/19/2011 06:00 PM, Christoph Lameter wrote:
>
> We need the complete system log starting from bootup.
>
> This looks like it has something to do with mutexes and pipes.

ah yes, I was told that there was a program running that sent
a large file to a pipe.
Attaching dmesg from the boot after the server was reset
and the kern.log from the boot before.

Best regards,

Peter
[ 0.000000] Linux version 2.6.32.29-ql-server-20 (root@ql-dev) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Wed Feb 23 14:20:09 CET 2011
[ 0.000000] Command line: auto BOOT_IMAGE=linux ro root=100 root=/dev/mapper/vgroot-root elevator=cfq
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
[ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 type 9
[ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000c40000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc40000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EBFFF write-through
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask F800000000 write-back
[ 0.000000] 1 base 0800000000 mask FC00000000 write-back
[ 0.000000] 2 base 0C00000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 base 00BF800000 mask FFFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000c40000000
[ 0.000000] 0100000000 - 0c40000000 page 2M
[ 0.000000] kernel direct mapping tables up to c40000000 @ 13000-45000
[ 0.000000] RAMDISK: 03c83000 - 040feff0
[ 0.000000] ACPI: RSDP 00000000000f9c40 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf790100 0007C (v01 100709 XSDT1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v04 100709 FACP1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7904c0 0597A (v02 1F280 1F280000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf79e000 00040
[ 0.000000] ACPI: APIC 00000000bf790390 000EA (v02 100709 APIC1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf790480 0003C (v01 100709 OEMMCFG 20091007 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf79e040 0007A (v01 100709 OEMB1044 20091007 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf79a4c0 00150 (v02 100709 OEMSRAT 00000001 INTL 00000001)
[ 0.000000] ACPI: DMAR 00000000bf79e0c0 00128 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79f800 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: EINJ 00000000bf79a610 00130 (v01 AMIER AMI_EINJ 20091007 MSFT 00000097)
[ 0.000000] ACPI: BERT 00000000bf79a7a0 00030 (v01 AMIER AMI_BERT 20091007 MSFT 00000097)
[ 0.000000] ACPI: ERST 00000000bf79a7d0 001B0 (v01 AMIER AMI_ERST 20091007 MSFT 00000097)
[ 0.000000] ACPI: HEST 00000000bf79a980 000A8 (v01 AMIER ABC_HEST 20091007 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-640000000
[ 0.000000] SRAT: Node 1 PXM 1 640000000-c40000000
[ 0.000000] NUMA: Allocated memnodemap from 40000 - 58840
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000640000000
[ 0.000000] NODE_DATA [0000000000058840 - 000000000005d83f]
[ 0.000000] bootmap [0000000000100000 - 00000000001c7fff] pages c8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0640000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001899604] TEXT DATA BSS ==> [0001000000 - 0001899604]
[ 0.000000] #3 [0003c83000 - 00040feff0] RAMDISK ==> [0003c83000 - 00040feff0]
[ 0.000000] #4 [0000097c00 - 0000100000] BIOS reserved ==> [0000097c00 - 0000100000]
[ 0.000000] #5 [000189a000 - 000189a1b8] BRK ==> [000189a000 - 000189a1b8]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000040000] PGTABLE ==> [0000013000 - 0000040000]
[ 0.000000] #8 [0000040000 - 0000058840] MEMNODEMAP ==> [0000040000 - 0000058840]
[ 0.000000] Bootmem setup node 1 0000000640000000-0000000c40000000
[ 0.000000] NODE_DATA [0000000640000000 - 0000000640004fff]
[ 0.000000] bootmap [0000000640005000 - 00000006400c4fff] pages c0
[ 0.000000] (9 early reservations) ==> bootmem [0640000000 - 0c40000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001899604] TEXT DATA BSS
[ 0.000000] #3 [0003c83000 - 00040feff0] RAMDISK
[ 0.000000] #4 [0000097c00 - 0000100000] BIOS reserved
[ 0.000000] #5 [000189a000 - 000189a1b8] BRK
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE
[ 0.000000] #7 [0000013000 - 0000040000] PGTABLE
[ 0.000000] #8 [0000040000 - 0000058840] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880028600000-ffff88003d5fffff] on node 0
[ 0.000000] [ffffea0015e00000-ffffea002adfffff] PMD -> [ffff880640200000-ffff8806551fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00c40000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000097
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00640000
[ 0.000000] 1: 0x00640000 -> 0x00c40000
[ 0.000000] On node 0 totalpages: 6289159
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 179 pages reserved
[ 0.000000] DMA zone: 3740 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5429760 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 6291456
[ 0.000000] Normal zone: 86016 pages used for memmap
[ 0.000000] Normal zone: 6205440 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec80400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 5, version 32, address 0xfec80400, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff880028200000 s73240 r8192 d20968 u262144
[ 0.000000] pcpu-alloc: s73240 r8192 d20968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 08 10 12 14 [1] 04 05 06 07 09 11 13 15
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 12404820
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=linux ro root=100 root=/dev/mapper/vgroot-root elevator=cfq
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 49552644k/51380224k available (3972k kernel code, 1057764k absent, 769816k reserved, 2393k data, 516k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2000.312 MHz processor.
[ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.62 BogoMIPS (lpj=8001248)
[ 0.005108] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.022008] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.029345] Mount-cache hash table entries: 256
[ 0.029571] CPU: Physical Processor ID: 0
[ 0.029643] CPU: Processor Core ID: 0
[ 0.029715] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.029836] CPU: L2 cache: 256K
[ 0.029905] CPU: L3 cache: 4096K
[ 0.029977] CPU 0/0x0 -> Node 0
[ 0.030048] mce: CPU supports 9 MCE banks
[ 0.030129] CPU0: Thermal monitoring enabled (TM1)
[ 0.030204] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.030567] using mwait in idle threads.
[ 0.030638] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.030813] ... version: 3
[ 0.030884] ... bit width: 48
[ 0.030956] ... generic registers: 4
[ 0.031027] ... value mask: 0000ffffffffffff
[ 0.031102] ... max period: 000000007fffffff
[ 0.031176] ... fixed-purpose events: 3
[ 0.031248] ... event mask: 000000070000000f
[ 0.031340] ACPI: Core revision 20090903
[ 0.041731] Setting APIC routing to physical flat
[ 0.042353] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088786] CPU0: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.196236] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.206615] Initializing CPU#1
[ 0.283940] CPU: Physical Processor ID: 0
[ 0.283942] CPU: Processor Core ID: 1
[ 0.283944] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.283946] CPU: L2 cache: 256K
[ 0.283947] CPU: L3 cache: 4096K
[ 0.283949] CPU 1/0x2 -> Node 0
[ 0.283962] CPU1: Thermal monitoring enabled (TM1)
[ 0.283965] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.283988] CPU1: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.284796] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.305062] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.315316] Initializing CPU#2
[ 0.395727] CPU: Physical Processor ID: 0
[ 0.395728] CPU: Processor Core ID: 2
[ 0.395731] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.395733] CPU: L2 cache: 256K
[ 0.395734] CPU: L3 cache: 4096K
[ 0.395736] CPU 2/0x4 -> Node 0
[ 0.395749] CPU2: Thermal monitoring enabled (TM1)
[ 0.395752] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.395784] CPU2: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.396592] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.416859] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.427114] Initializing CPU#3
[ 0.507514] CPU: Physical Processor ID: 0
[ 0.507515] CPU: Processor Core ID: 3
[ 0.507518] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.507519] CPU: L2 cache: 256K
[ 0.507521] CPU: L3 cache: 4096K
[ 0.507523] CPU 3/0x6 -> Node 0
[ 0.507536] CPU3: Thermal monitoring enabled (TM1)
[ 0.507539] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.507581] CPU3: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.508390] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.528717] Booting processor 4 APIC 0x10 ip 0x6000
[ 0.538971] Initializing CPU#4
[ 0.619301] CPU: Physical Processor ID: 1
[ 0.619302] CPU: Processor Core ID: 0
[ 0.619304] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.619306] CPU: L2 cache: 256K
[ 0.619307] CPU: L3 cache: 4096K
[ 0.619310] CPU 4/0x10 -> Node 1
[ 0.619322] CPU4: Thermal monitoring enabled (TM1)
[ 0.619326] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.619339] CPU4: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.620147] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.640437] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.650693] Initializing CPU#5
[ 0.731089] CPU: Physical Processor ID: 1
[ 0.731091] CPU: Processor Core ID: 1
[ 0.731093] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.731095] CPU: L2 cache: 256K
[ 0.731097] CPU: L3 cache: 4096K
[ 0.731099] CPU 5/0x12 -> Node 1
[ 0.731114] CPU5: Thermal monitoring enabled (TM1)
[ 0.731117] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.731211] CPU5: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.732020] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.752332] Booting processor 6 APIC 0x14 ip 0x6000
[ 0.762589] Initializing CPU#6
[ 0.842876] CPU: Physical Processor ID: 1
[ 0.842877] CPU: Processor Core ID: 2
[ 0.842880] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.842882] CPU: L2 cache: 256K
[ 0.842883] CPU: L3 cache: 4096K
[ 0.842886] CPU 6/0x14 -> Node 1
[ 0.842900] CPU6: Thermal monitoring enabled (TM1)
[ 0.842904] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.842954] CPU6: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.843762] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.864070] Booting processor 7 APIC 0x16 ip 0x6000
[ 0.874326] Initializing CPU#7
[ 0.954663] CPU: Physical Processor ID: 1
[ 0.954664] CPU: Processor Core ID: 3
[ 0.954667] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.954669] CPU: L2 cache: 256K
[ 0.954670] CPU: L3 cache: 4096K
[ 0.954673] CPU 7/0x16 -> Node 1
[ 0.954688] CPU7: Thermal monitoring enabled (TM1)
[ 0.954691] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.954721] CPU7: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz stepping 05
[ 0.955529] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.975706] Brought up 8 CPUs
[ 0.975777] Total of 8 processors activated (32002.46 BogoMIPS).
[ 0.978606] xor: automatically using best checksumming function: generic_sse
[ 0.998582] generic_sse: 7445.000 MB/sec
[ 0.998655] xor: using function: generic_sse (7445.000 MB/sec)
[ 0.998805] NET: Registered protocol family 16
[ 0.998970] ACPI: bus type pci registered
[ 0.999085] PCI: Using configuration type 1 for base access
[ 1.000173] bio: create slab <bio-0> at 0
[ 1.001130] ACPI: EC: Look up EC in DSDT
[ 1.003890] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 1.004092] \_SB_:_OSC evaluation returned wrong type
[ 1.004094] _OSC request data:1 6
[ 1.004603] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.012316] ACPI: Interpreter enabled
[ 1.012389] ACPI: (supports S0 S1 S5)
[ 1.012619] ACPI: Using IOAPIC for interrupt routing
[ 1.023502] ACPI Warning: Incorrect checksum in table [OEMB] - 0A, should be FF (20090903/tbutils-314)
[ 1.024009] ACPI: No dock devices found.
[ 1.024258] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.024417] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.024496] pci 0000:00:00.0: PME# disabled
[ 1.024630] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.024708] pci 0000:00:01.0: PME# disabled
[ 1.024844] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.024922] pci 0000:00:03.0: PME# disabled
[ 1.025058] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.025136] pci 0000:00:05.0: PME# disabled
[ 1.025272] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.025350] pci 0000:00:07.0: PME# disabled
[ 1.025485] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.025563] pci 0000:00:09.0: PME# disabled
[ 1.025999] pci 0000:00:16.0: reg 10 64bit mmio: [0xfb8d8000-0xfb8dbfff]
[ 1.026063] pci 0000:00:16.1: reg 10 64bit mmio: [0xfb8dc000-0xfb8dffff]
[ 1.026126] pci 0000:00:16.2: reg 10 64bit mmio: [0xfb8e0000-0xfb8e3fff]
[ 1.026190] pci 0000:00:16.3: reg 10 64bit mmio: [0xfb8e4000-0xfb8e7fff]
[ 1.026253] pci 0000:00:16.4: reg 10 64bit mmio: [0xfb8e8000-0xfb8ebfff]
[ 1.026316] pci 0000:00:16.5: reg 10 64bit mmio: [0xfb8ec000-0xfb8effff]
[ 1.026380] pci 0000:00:16.6: reg 10 64bit mmio: [0xfb8f0000-0xfb8f3fff]
[ 1.026443] pci 0000:00:16.7: reg 10 64bit mmio: [0xfb8f4000-0xfb8f7fff]
[ 1.026528] pci 0000:00:1a.0: reg 20 io port: [0x9400-0x941f]
[ 1.026601] pci 0000:00:1a.1: reg 20 io port: [0x9480-0x949f]
[ 1.026669] pci 0000:00:1a.2: reg 20 io port: [0x9800-0x981f]
[ 1.026743] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfb8fa000-0xfb8fa3ff]
[ 1.026797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.026876] pci 0000:00:1a.7: PME# disabled
[ 1.027008] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.027086] pci 0000:00:1c.0: PME# disabled
[ 1.027222] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.027300] pci 0000:00:1c.4: PME# disabled
[ 1.027424] pci 0000:00:1d.0: reg 20 io port: [0x9880-0x989f]
[ 1.027493] pci 0000:00:1d.1: reg 20 io port: [0x9c00-0x9c1f]
[ 1.027562] pci 0000:00:1d.2: reg 20 io port: [0xa000-0xa01f]
[ 1.027634] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfb8fc000-0xfb8fc3ff]
[ 1.027688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.027766] pci 0000:00:1d.7: PME# disabled
[ 1.027965] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 1.027969] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.028066] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 1.028146] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 1.028244] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
[ 1.028341] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[ 1.028486] pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
[ 1.028491] pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
[ 1.028497] pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
[ 1.028502] pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
[ 1.028508] pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f]
[ 1.028513] pci 0000:00:1f.2: reg 24 io port: [0xb080-0xb08f]
[ 1.028559] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb8fe000-0xfb8fe0ff]
[ 1.028572] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 1.028616] pci 0000:00:1f.5: reg 10 io port: [0xac00-0xac07]
[ 1.028622] pci 0000:00:1f.5: reg 14 io port: [0xa880-0xa883]
[ 1.028627] pci 0000:00:1f.5: reg 18 io port: [0xa800-0xa807]
[ 1.028632] pci 0000:00:1f.5: reg 1c io port: [0xa480-0xa483]
[ 1.028638] pci 0000:00:1f.5: reg 20 io port: [0xa400-0xa40f]
[ 1.028643] pci 0000:00:1f.5: reg 24 io port: [0xa080-0xa08f]
[ 1.028711] pci 0000:0a:00.0: reg 10 32bit mmio: [0xfbe60000-0xfbe7ffff]
[ 1.028717] pci 0000:0a:00.0: reg 14 32bit mmio: [0xfbe40000-0xfbe5ffff]
[ 1.028724] pci 0000:0a:00.0: reg 18 io port: [0xe880-0xe89f]
[ 1.028730] pci 0000:0a:00.0: reg 1c 32bit mmio: [0xfbe1c000-0xfbe1ffff]
[ 1.028745] pci 0000:0a:00.0: reg 30 32bit mmio pref: [0xfbe20000-0xfbe3ffff]
[ 1.028774] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 1.028853] pci 0000:0a:00.0: PME# disabled
[ 1.028968] pci 0000:0a:00.1: reg 10 32bit mmio: [0xfbee0000-0xfbefffff]
[ 1.028975] pci 0000:0a:00.1: reg 14 32bit mmio: [0xfbec0000-0xfbedffff]
[ 1.028981] pci 0000:0a:00.1: reg 18 io port: [0xec00-0xec1f]
[ 1.028988] pci 0000:0a:00.1: reg 1c 32bit mmio: [0xfbe9c000-0xfbe9ffff]
[ 1.029002] pci 0000:0a:00.1: reg 30 32bit mmio pref: [0xfbea0000-0xfbebffff]
[ 1.029032] pci 0000:0a:00.1: PME# supported from D0 D3hot D3cold
[ 1.029110] pci 0000:0a:00.1: PME# disabled
[ 1.029217] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 1.029220] pci 0000:00:01.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 1.029259] pci 0000:09:00.0: reg 10 64bit mmio: [0xfbc00000-0xfbdfffff]
[ 1.029281] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xfbb80000-0xfbbfffff]
[ 1.029305] pci 0000:09:00.0: supports D1
[ 1.029335] pci 0000:00:03.0: bridge 32bit mmio: [0xfbb00000-0xfbdfffff]
[ 1.029423] pci 0000:04:00.0: PXH quirk detected; SHPC device MSI disabled
[ 1.029532] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.029610] pci 0000:04:00.0: PME# disabled
[ 1.029715] pci 0000:04:00.2: PXH quirk detected; SHPC device MSI disabled
[ 1.029823] pci 0000:04:00.2: PME# supported from D0 D3hot D3cold
[ 1.029901] pci 0000:04:00.2: PME# disabled
[ 1.030190] pci 0000:02:00.0: reg 10 io port: [0xd400-0xd407]
[ 1.030199] pci 0000:02:00.0: reg 14 io port: [0xdc00-0xdc03]
[ 1.030208] pci 0000:02:00.0: reg 18 io port: [0xd880-0xd887]
[ 1.030217] pci 0000:02:00.0: reg 1c io port: [0xd800-0xd803]
[ 1.030225] pci 0000:02:00.0: reg 20 io port: [0xd480-0xd48f]
[ 1.030241] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbaf0000-0xfbafffff]
[ 1.030322] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 1.030326] pci 0000:00:1c.4: bridge 32bit mmio: [0xfba00000-0xfbafffff]
[ 1.030366] pci 0000:01:01.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 1.030373] pci 0000:01:01.0: reg 14 io port: [0xc000-0xc0ff]
[ 1.030380] pci 0000:01:01.0: reg 18 32bit mmio: [0xfb9d0000-0xfb9dffff]
[ 1.030402] pci 0000:01:01.0: reg 30 32bit mmio pref: [0xfb9e0000-0xfb9fffff]
[ 1.030421] pci 0000:01:01.0: supports D1 D2
[ 1.030464] pci 0000:00:1e.0: transparent bridge
[ 1.030542] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 1.030546] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
[ 1.030552] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff]
[ 1.030585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.030880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.030998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.031064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.031131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE5._PRT]
[ 1.031196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.031261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 1.031330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT]
[ 1.031421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT]
[ 1.031487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.031564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.073169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.073933] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.074699] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.075459] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.076220] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.077093] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 1.077853] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.078729] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 1.079477] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.079574] vgaarb: loaded
[ 1.079791] SCSI subsystem initialized
[ 1.080018] libata version 3.00 loaded.
[ 1.146316] raid6: int64x1 2163 MB/s
[ 1.214186] raid6: int64x2 2503 MB/s
[ 1.282068] raid6: int64x4 1786 MB/s
[ 1.349931] raid6: int64x8 1579 MB/s
[ 1.417806] raid6: sse2x1 4875 MB/s
[ 1.485666] raid6: sse2x2 5617 MB/s
[ 1.553538] raid6: sse2x4 6703 MB/s
[ 1.553609] raid6: using algorithm sse2x4 (6703 MB/s)
[ 1.553689] PCI: Using ACPI for IRQ routing
[ 1.554096] hpet clockevent registered
[ 1.554100] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.566661] Switching to clocksource tsc
[ 1.567068] pnp: PnP ACPI init
[ 1.567159] ACPI: bus type pnp registered
[ 1.572285] pnp: PnP ACPI: found 16 devices
[ 1.572359] ACPI: ACPI bus type pnp unregistered
[ 1.572442] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 1.572521] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 1.572601] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 1.572681] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 1.572760] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
[ 1.572840] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 1.572925] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 1.579739] system 00:09: ioport range 0x800-0x87f has been reserved
[ 1.579818] system 00:09: ioport range 0x500-0x57f could not be reserved
[ 1.579897] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.579977] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.580056] system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 1.580139] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.580235] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.580318] system 00:0d: ioport range 0xa00-0xa0f has been reserved
[ 1.580399] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.580481] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 1.580560] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 1.580638] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 1.580718] system 00:0f: iomem range 0x100000-0xbf8fffff could not be reserved
[ 1.580813] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
[ 1.585552] pci 0000:01:01.0: BAR 6: address space collision on of device [0xfb9e0000-0xfb9fffff]
[ 1.585719] pci 0000:00:01.0: PCI bridge, secondary bus 0000:0a
[ 1.585795] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 1.585872] pci 0000:00:01.0: MEM window: 0xfbe00000-0xfbefffff
[ 1.585950] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.586028] pci 0000:00:03.0: PCI bridge, secondary bus 0000:09
[ 1.586104] pci 0000:00:03.0: IO window: disabled
[ 1.586180] pci 0000:00:03.0: MEM window: 0xfbb00000-0xfbdfffff
[ 1.586258] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.586336] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 1.586411] pci 0000:00:05.0: IO window: disabled
[ 1.586487] pci 0000:00:05.0: MEM window: disabled
[ 1.586562] pci 0000:00:05.0: PREFETCH window: disabled
[ 1.586642] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 1.586718] pci 0000:00:07.0: IO window: disabled
[ 1.586794] pci 0000:00:07.0: MEM window: disabled
[ 1.586869] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.586947] pci 0000:04:00.0: PCI bridge, secondary bus 0000:06
[ 1.587023] pci 0000:04:00.0: IO window: disabled
[ 1.587099] pci 0000:04:00.0: MEM window: disabled
[ 1.587174] pci 0000:04:00.0: PREFETCH window: disabled
[ 1.587252] pci 0000:04:00.2: PCI bridge, secondary bus 0000:05
[ 1.587328] pci 0000:04:00.2: IO window: disabled
[ 1.587403] pci 0000:04:00.2: MEM window: disabled
[ 1.587479] pci 0000:04:00.2: PREFETCH window: disabled
[ 1.587557] pci 0000:00:09.0: PCI bridge, secondary bus 0000:04
[ 1.587632] pci 0000:00:09.0: IO window: disabled
[ 1.587708] pci 0000:00:09.0: MEM window: disabled
[ 1.587783] pci 0000:00:09.0: PREFETCH window: disabled
[ 1.587861] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 1.587938] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 1.588016] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 1.588094] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 1.588193] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 1.588270] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 1.588348] pci 0000:00:1c.4: MEM window: 0xfba00000-0xfbafffff
[ 1.588426] pci 0000:00:1c.4: PREFETCH window: 0x000000c0400000-0x000000c05fffff
[ 1.588526] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 1.588604] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.588681] pci 0000:00:1e.0: MEM window: 0xfb900000-0xfb9fffff
[ 1.588759] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff
[ 1.588867] pci 0000:00:01.0: setting latency timer to 64
[ 1.588874] pci 0000:00:03.0: setting latency timer to 64
[ 1.588882] pci 0000:00:05.0: setting latency timer to 64
[ 1.588890] pci 0000:00:07.0: setting latency timer to 64
[ 1.588897] pci 0000:00:09.0: setting latency timer to 64
[ 1.588905] pci 0000:04:00.0: setting latency timer to 64
[ 1.588912] pci 0000:04:00.2: setting latency timer to 64
[ 1.588919] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.589004] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.589084] pci 0000:00:1c.0: setting latency timer to 64
[ 1.589091] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.589171] pci 0000:00:1c.4: setting latency timer to 64
[ 1.589177] pci 0000:00:1e.0: setting latency timer to 64
[ 1.589181] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.589184] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.589186] pci_bus 0000:0a: resource 0 io: [0xe000-0xefff]
[ 1.589188] pci_bus 0000:0a: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 1.589191] pci_bus 0000:09: resource 1 mem: [0xfbb00000-0xfbdfffff]
[ 1.589194] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
[ 1.589196] pci_bus 0000:03: resource 1 mem: [0xc0000000-0xc01fffff]
[ 1.589199] pci_bus 0000:03: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 1.589201] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 1.589203] pci_bus 0000:02: resource 1 mem: [0xfba00000-0xfbafffff]
[ 1.589205] pci_bus 0000:02: resource 2 pref mem [0xc0400000-0xc05fffff]
[ 1.589208] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 1.589210] pci_bus 0000:01: resource 1 mem: [0xfb900000-0xfb9fffff]
[ 1.589212] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 1.589214] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 1.589216] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.589280] NET: Registered protocol family 2
[ 1.589751] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.591358] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.593348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.593647] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.593725] TCP reno registered
[ 1.594006] NET: Registered protocol family 1
[ 1.594323] RPC: Registered udp transport module.
[ 1.594396] RPC: Registered tcp transport module.
[ 1.594470] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.594757] pci 0000:01:01.0: Boot video device
[ 1.594816] Trying to unpack rootfs image as initramfs...
[ 1.715417] Freeing initrd memory: 4591k freed
[ 1.719582] VFS: Disk quotas dquot_6.5.2
[ 1.719678] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.720206] msgmni has been set to 32768
[ 1.720590] alg: No test for stdrng (krng)
[ 1.720694] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.720790] io scheduler noop registered
[ 1.720862] io scheduler anticipatory registered
[ 1.720935] io scheduler deadline registered
[ 1.721029] io scheduler cfq registered (default)
[ 1.721295] pcieport 0000:00:01.0: irq 72 for MSI/MSI-X
[ 1.721303] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.721405] pcieport 0000:00:03.0: irq 73 for MSI/MSI-X
[ 1.721411] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.721511] pcieport 0000:00:05.0: irq 74 for MSI/MSI-X
[ 1.721518] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.721617] pcieport 0000:00:07.0: irq 75 for MSI/MSI-X
[ 1.721624] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.721722] pcieport 0000:00:09.0: irq 76 for MSI/MSI-X
[ 1.721729] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.721827] pcieport 0000:00:1c.0: irq 77 for MSI/MSI-X
[ 1.721835] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.721944] pcieport 0000:00:1c.4: irq 78 for MSI/MSI-X
[ 1.721952] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.738711] Real Time Clock Driver v1.12b
[ 1.738889] Linux agpgart interface v0.103
[ 1.738962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.739132] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.739328] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.739771] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.740047] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.740378] Floppy drive(s): fd0 is 1.44M
[ 1.758132] FDC 0 is a post-1991 82077
[ 1.760145] brd: module loaded
[ 1.760670] loop: module loaded
[ 1.760740] HP CISS Driver (v 3.6.20)
[ 1.760984] Adaptec aacraid driver 1.1-5[2461]-ms
[ 1.761091] aacraid 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.761172] aacraid 0000:09:00.0: setting latency timer to 64
[ 1.826573] IRQ 16/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
[ 2.033946] AAC0: kernel 5.2-0[17899] Apr 14 2010
[ 2.034025] AAC0: monitor 5.2-0[17899]
[ 2.034096] AAC0: bios 5.2-0[17899]
[ 2.034168] AAC0: serial 9D511144775
[ 2.034238] AAC0: Non-DASD support enabled.
[ 2.034310] AAC0: 64bit support enabled.
[ 2.034382] AAC0: 64 Bit DAC enabled
[ 2.047360] scsi0 : aacraid
[ 2.047643] scsi 0:0:0:0: Direct-Access Adaptec Vol1 V1.0 PQ: 0 ANSI: 2
[ 2.048018] scsi 0:0:1:0: Direct-Access Adaptec Raid6 V1.0 PQ: 0 ANSI: 2
[ 2.059436] scsi 0:1:8:0: Direct-Access ST3250310NS SN06 PQ: 1 ANSI: 5
[ 2.059816] scsi 0:1:9:0: Direct-Access ST3250310NS SN06 PQ: 1 ANSI: 5
[ 2.060179] scsi 0:1:10:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.060547] scsi 0:1:11:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.060920] scsi 0:1:12:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.061285] scsi 0:1:13:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.061646] scsi 0:1:14:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.062017] scsi 0:1:15:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.062383] scsi 0:1:16:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.062745] scsi 0:1:17:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.063116] scsi 0:1:18:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.063481] scsi 0:1:19:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.063847] scsi 0:1:20:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.064218] scsi 0:1:21:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.064591] scsi 0:1:22:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.064959] scsi 0:1:23:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.065329] scsi 0:1:24:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.065702] scsi 0:1:25:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.066071] scsi 0:1:26:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.066437] scsi 0:1:27:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.066807] scsi 0:1:28:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.067183] scsi 0:1:29:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.067556] scsi 0:1:30:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.067933] scsi 0:1:31:0: Direct-Access Hitachi HUA722020ALA330 JKAO PQ: 1 ANSI: 5
[ 2.098990] scsi 0:3:0:0: Enclosure LSILOGIC SASX36 A.1 7015 PQ: 0 ANSI: 3
[ 2.115181] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 2.115312] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 2.115404] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 2.115499] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.115589] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 2.115678] 3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
[ 2.115788] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 2.116054] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 2.116058] sd 0:0:0:0: [sda] 488017920 512-byte logical blocks: (249 GB/232 GiB)
[ 2.116075] ata_piix 0000:00:1f.2: version 2.13
[ 2.116078] sd 0:0:0:0: [sda] Write Protect is off
[ 2.116080] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
[ 2.116092] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.116096] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.116108] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 2.116137] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.116194] scsi1 : ata_piix
[ 2.116252] scsi2 : ata_piix
[ 2.118008] ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
[ 2.118016] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
[ 2.118040] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.118045] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.118091] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.118130] scsi3 : ata_piix
[ 2.118187] scsi4 : ata_piix
[ 2.119846] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
[ 2.119851] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
[ 2.119965] Fusion MPT base driver 3.04.12
[ 2.119966] Copyright (c) 1999-2008 LSI Corporation
[ 2.119973] Fusion MPT SPI Host driver 3.04.12
[ 2.119987] Fusion MPT SAS Host driver 3.04.12
[ 2.120052] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.121561] sda:
[ 2.122348] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.122353] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.122437] mice: PS/2 mouse device common for all mice
[ 2.122469] sda1 sda2
[ 2.124892] sd 0:0:1:0: [sdb] 74113331200 512-byte logical blocks: (37.9 TB/34.5 TiB)
[ 2.124895] md: raid0 personality registered for level 0
[ 2.124897] md: raid1 personality registered for level 1
[ 2.124900] md: raid10 personality registered for level 10
[ 2.124901] md: raid6 personality registered for level 6
[ 2.124903] md: raid5 personality registered for level 5
[ 2.124904] md: raid4 personality registered for level 4
[ 2.124906] md: multipath personality registered for level -4
[ 2.124990] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.125594] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.125673] sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
[ 2.125697] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 2.125857] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.126030] EDAC MC: Ver: 2.1.0 Feb 23 2011
[ 2.126257] cpuidle: using governor ladder
[ 2.126443] TCP cubic registered
[ 2.126532] NET: Registered protocol family 17
[ 2.127508] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 2.127649] sdb: unknown partition table
[ 2.127898] sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 2.128038] sd 0:0:1:0: [sdb] Attached SCSI removable disk
[ 2.140476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.393896] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.449980] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.460683] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.765421] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 2.765510] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.776151] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 2.776239] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.776365] Freeing unused kernel memory: 516k freed
[ 2.776556] Write protecting the kernel read-only data: 5440k
[ 3.127359] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2
[ 3.127457] Copyright (c) 2007-2009 Intel Corporation.
[ 3.127573] igb 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.127661] igb 0000:0a:00.0: setting latency timer to 64
[ 3.127925] igb 0000:0a:00.0: irq 79 for MSI/MSI-X
[ 3.127928] igb 0000:0a:00.0: irq 80 for MSI/MSI-X
[ 3.127931] igb 0000:0a:00.0: irq 81 for MSI/MSI-X
[ 3.127934] igb 0000:0a:00.0: irq 82 for MSI/MSI-X
[ 3.127937] igb 0000:0a:00.0: irq 83 for MSI/MSI-X
[ 3.127940] igb 0000:0a:00.0: irq 84 for MSI/MSI-X
[ 3.127943] igb 0000:0a:00.0: irq 85 for MSI/MSI-X
[ 3.127946] igb 0000:0a:00.0: irq 86 for MSI/MSI-X
[ 3.127948] igb 0000:0a:00.0: irq 87 for MSI/MSI-X
[ 3.318644] igb 0000:0a:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.318729] igb 0000:0a:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:ff:84
[ 3.318883] igb 0000:0a:00.0: eth0: PBA No: 0010ff-0ff
[ 3.318958] igb 0000:0a:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.319081] igb 0000:0a:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.319170] igb 0000:0a:00.1: setting latency timer to 64
[ 3.319431] igb 0000:0a:00.1: irq 88 for MSI/MSI-X
[ 3.319434] igb 0000:0a:00.1: irq 89 for MSI/MSI-X
[ 3.319437] igb 0000:0a:00.1: irq 90 for MSI/MSI-X
[ 3.319439] igb 0000:0a:00.1: irq 91 for MSI/MSI-X
[ 3.319442] igb 0000:0a:00.1: irq 92 for MSI/MSI-X
[ 3.319444] igb 0000:0a:00.1: irq 93 for MSI/MSI-X
[ 3.319447] igb 0000:0a:00.1: irq 94 for MSI/MSI-X
[ 3.319449] igb 0000:0a:00.1: irq 95 for MSI/MSI-X
[ 3.319452] igb 0000:0a:00.1: irq 96 for MSI/MSI-X
[ 3.482177] usbcore: registered new interface driver usbfs
[ 3.482289] usbcore: registered new interface driver hub
[ 3.482389] usbcore: registered new device driver usb
[ 3.484054] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.484192] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.484276] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.484284] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.484378] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.484497] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
[ 3.484701] usb usb1: configuration #1 chosen from 1 choice
[ 3.484798] hub 1-0:1.0: USB hub found
[ 3.484874] hub 1-0:1.0: 2 ports detected
[ 3.485013] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.485097] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.485099] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.485179] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.485303] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
[ 3.485453] usb usb2: configuration #1 chosen from 1 choice
[ 3.485549] hub 2-0:1.0: USB hub found
[ 3.485623] hub 2-0:1.0: 2 ports detected
[ 3.485752] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.485834] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.485837] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.485916] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 3.486032] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
[ 3.486126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.486182] usb usb3: configuration #1 chosen from 1 choice
[ 3.486205] hub 3-0:1.0: USB hub found
[ 3.486210] hub 3-0:1.0: 2 ports detected
[ 3.486267] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.486273] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.486276] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.486282] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.486317] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
[ 3.486395] usb usb4: configuration #1 chosen from 1 choice
[ 3.486417] hub 4-0:1.0: USB hub found
[ 3.486422] hub 4-0:1.0: 2 ports detected
[ 3.486477] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.486482] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.486485] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.486493] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.486523] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
[ 3.486596] usb usb5: configuration #1 chosen from 1 choice
[ 3.486619] hub 5-0:1.0: USB hub found
[ 3.486623] hub 5-0:1.0: 2 ports detected
[ 3.486684] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.486690] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.486693] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.486699] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.486727] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
[ 3.486805] usb usb6: configuration #1 chosen from 1 choice
[ 3.486827] hub 6-0:1.0: USB hub found
[ 3.486832] hub 6-0:1.0: 2 ports detected
[ 3.488036] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 3.488168] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.488281] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.488284] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.488370] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 3.488505] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.492452] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.492461] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb8fa000
[ 3.511843] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.512054] usb usb7: configuration #1 chosen from 1 choice
[ 3.512158] hub 7-0:1.0: USB hub found
[ 3.512235] hub 7-0:1.0: 6 ports detected
[ 3.512386] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.512480] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.512483] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.512563] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.512688] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.514455] igb 0000:0a:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 3.514541] igb 0000:0a:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:cf:ff:85
[ 3.514701] igb 0000:0a:00.1: eth1: PBA No: 0010ff-0ff
[ 3.514781] igb 0000:0a:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 3.516637] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.516645] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb8fc000
[ 3.535820] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.535983] usb usb8: configuration #1 chosen from 1 choice
[ 3.536082] hub 8-0:1.0: USB hub found
[ 3.536159] hub 8-0:1.0: 6 ports detected
[ 3.824714] usb 7-5: new high speed USB device using ehci_hcd and address 2
[ 3.958182] usb 7-5: configuration #1 chosen from 1 choice
[ 4.322693] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.493529] usb 4-2: configuration #1 chosen from 1 choice
[ 5.231673] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.0/input/input2
[ 5.231858] generic-usb 0003:14DD:0002.0001: input: USB HID v1.01 Mouse [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input0
[ 5.233134] input: Peppercon AG Multidevice as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.1/input/input3
[ 5.233267] generic-usb 0003:14DD:0002.0002: input: USB HID v1.01 Keyboard [Peppercon AG Multidevice] on usb-0000:00:1a.7-5/input1
[ 5.233387] usbcore: registered new interface driver usbhid
[ 5.233463] usbhid: v2.6:USB HID core driver
[ 5.531513] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.531591] EXT3-fs: write access will be enabled during recovery.
[ 5.906543] kjournald starting. Commit interval 5 seconds
[ 5.906553] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 5.911646] ext3_orphan_cleanup: deleting unreferenced inode 36809
[ 5.923295] EXT3-fs: dm-0: 1 orphan inode deleted
[ 5.923375] EXT3-fs: recovery complete.
[ 5.930764] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.720152] udevd version 125 started
[ 7.003153] ACPI: SSDT 00000000bf79e1f0 00FAC (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 7.004045] ACPI: SSDT 00000000bf79f1a0 00659 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 7.007022] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.007126] ACPI: Power Button [PWRB]
[ 7.007209] Monitor-Mwait will be used to enter C-3 state
[ 7.007441] Monitor-Mwait will be used to enter C-3 state
[ 7.007541] processor LNXCPU:00: registered as cooling_device0
[ 7.007677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.007774] ACPI: Power Button [PWRF]
[ 7.012236] processor LNXCPU:01: registered as cooling_device1
[ 7.013692] processor LNXCPU:02: registered as cooling_device2
[ 7.015148] processor LNXCPU:03: registered as cooling_device3
[ 7.016777] processor LNXCPU:04: registered as cooling_device4
[ 7.033370] processor LNXCPU:05: registered as cooling_device5
[ 7.035002] processor LNXCPU:06: registered as cooling_device6
[ 7.045118] processor LNXCPU:07: registered as cooling_device7
[ 7.932691] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 10.151054] Adding 41943032k swap on /dev/mapper/vgroot-swap. Priority:-1 extents:1 across:41943032k
[ 10.162387] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 10.162626] EXT3 FS on dm-0, internal journal
[ 25.605369] fuse init (API version 7.13)
[ 25.787164] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 25.824638] kjournald starting. Commit interval 5 seconds
[ 25.824935] EXT3 FS on dm-2, internal journal
[ 25.825065] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.826775] kjournald starting. Commit interval 5 seconds
[ 25.826941] EXT3 FS on dm-3, internal journal
[ 25.827117] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.828785] kjournald starting. Commit interval 5 seconds
[ 25.828894] EXT3 FS on dm-4, internal journal
[ 25.828897] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.854908] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 25.860131] SGI XFS Quota Management subsystem
[ 25.878264] XFS mounting filesystem dm-6
[ 26.014187] Starting XFS recovery on filesystem: dm-6 (logdev: internal)
[ 26.168204] Ending XFS recovery on filesystem: dm-6 (logdev: internal)
[ 26.185153] XFS mounting filesystem dm-5
[ 26.338834] Starting XFS recovery on filesystem: dm-5 (logdev: internal)
[ 26.606237] Ending XFS recovery on filesystem: dm-5 (logdev: internal)
[ 26.607341] Filesystem "dm-8": Disabling barriers, not supported with external log device
[ 26.630941] XFS mounting filesystem dm-8
[ 26.787638] Starting XFS recovery on filesystem: dm-8 (logdev: /dev/vgroot/raid6-intern-log)
[ 27.425554] Ending XFS recovery on filesystem: dm-8 (logdev: /dev/vgroot/raid6-intern-log)
[ 29.169529] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 29.254818] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.266829] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.267790] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 29.267885] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 29.267981] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 39.988554] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 50.330508] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[unhandled content-type:application/x-gzip]
\
 
 \ /
  Last update: 2011-05-23 08:37    [W:0.116 / U:6.516 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site