lkml.org 
[lkml]   [2011]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/13] mach-ux500: update the DB5500 register file
Date
From: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-ux500/include/mach/db5500-regs.h | 20 ++++++++++++++++++--
1 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index bd88c1e..6ad9832 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -17,6 +17,8 @@
#define U5500_GIC_DIST_BASE 0xA0411000
#define U5500_GIC_CPU_BASE 0xA0410100
#define U5500_DMA_BASE 0x90030000
+#define U5500_STM_BASE 0x90020000
+#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000)
#define U5500_MCDE_BASE 0xA0400000
#define U5500_MODEM_BASE 0xB0000000
#define U5500_L2CC_BASE 0xA0412000
@@ -29,7 +31,9 @@
#define U5500_NAND0_BASE 0x60000000
#define U5500_NAND1_BASE 0x70000000
#define U5500_TWD_BASE 0xa0410600
+#define U5500_ICN_BASE 0xA0040000
#define U5500_B2R2_BASE 0xa0200000
+#define U5500_BOOT_ROM_BASE 0x90000000

#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
@@ -60,6 +64,7 @@
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
+#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)

#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
@@ -83,7 +88,7 @@
#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000)
+#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100)
#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
@@ -114,8 +119,19 @@
#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20)
#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F)

-#define U5500_ESRAM_BASE 0x40000000
+#define U5500_ACCCON_BASE_SEC (0xBFFF0000)
+#define U5500_ACCCON_BASE (0xBFFF1000)
+#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
+#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+
+#define U5500_ESRAM_BASE 0x40000000
#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)

+#define U5500_MCDE_SIZE 0x1000
+#define U5500_DSI_LINK_SIZE 0x1000
+#define U5500_DSI_LINK_COUNT 0x2
+#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE)
+#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
+
#endif
--
1.7.3.2


\
 
 \ /
  Last update: 2011-05-21 10:45    [W:0.025 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site