lkml.org 
[lkml]   [2011]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Zaurus-devel] spitz pm: add power monitoring driver
Date
On Saturday, May 21, 2011 07:01:29 PM Pavel Machek wrote:
> This adds battery/charge monitoring driver for spitz.
>
> This is version I'd like to see merged.
>
> Is it ok for Marek to merge this?

No, I believe Anton should merge this.
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/arch/arm/mach-pxa/sharpsl_pm.c
> b/arch/arm/mach-pxa/sharpsl_pm.c index 785880f..513588c 100644
> --- a/arch/arm/mach-pxa/sharpsl_pm.c
> +++ b/arch/arm/mach-pxa/sharpsl_pm.c
> @@ -68,6 +51,7 @@ static void sharpsl_battery_thread(struct work_struct
> *private_); * Variables
> */
> struct sharpsl_pm_status sharpsl_pm;
> +EXPORT_SYMBOL(sharpsl_pm);
> static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
> static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
> DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 01c5769..ddb1b24 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -920,6 +920,25 @@ static void __init spitz_i2c_init(void)
> static inline void spitz_i2c_init(void) {}
> #endif
>
> +
> +/*************************************************************************
> ***** + * Battery
> +
> **************************************************************************
> ****/ +
> +#if defined(CONFIG_BATTERY_SPITZ) || defined(CONFIG_BATTERY_SPITZ_MODULE)
> +static struct platform_device spitz_battery_device = {
> + .name = "spitz-battery",
> + .id = -1,
> +};
> +
> +static void __init spitz_battery_init(void)
> +{
> + platform_device_register(&spitz_battery_device);
> +}
> +#else
> +static void __init spitz_battery_init(void) {}
> +#endif
> +
> /*************************************************************************
> ***** * Machine init
>
> **************************************************************************
> ****/ @@ -968,6 +987,7 @@ static void __init spitz_init(void)
> spitz_nor_init();
> spitz_nand_init();
> spitz_i2c_init();
> + spitz_battery_init();
> }
>
> static void __init spitz_fixup(struct machine_desc *desc,
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 52a462f..df54d70 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -102,6 +102,12 @@ config BATTERY_COLLIE
> Say Y to enable support for the battery on the Sharp Zaurus
> SL-5500 (collie) models.
>
> +config BATTERY_SPITZ
> + tristate "Sharp SL-3000C (spitz) battery"
> + help
> + Say Y to enable support for the battery on the Sharp Zaurus
> + SL-3000C (spitz) models.
> +
> config BATTERY_WM97XX
> bool "WM97xx generic battery driver"
> depends on TOUCHSCREEN_WM97XX=y
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 8385bfa..7a82c1e 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
> obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
> obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
> obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
> +obj-$(CONFIG_BATTERY_SPITZ) += spitz_battery.o
> obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
> obj-$(CONFIG_BATTERY_BQ20Z75) += bq20z75.o
> obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
> diff --git a/drivers/power/spitz_battery.c b/drivers/power/spitz_battery.c
> new file mode 100644
> index 0000000..5981f58
> --- /dev/null
> +++ b/drivers/power/spitz_battery.c
> @@ -0,0 +1,355 @@
> +/*
> + * Battery and Power Management code for the Sharp SL-3000c
> + *
> + * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#include <linux/platform_device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/power_supply.h>
> +#include <linux/delay.h>
> +#include <linux/spinlock.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +
> +#include <asm/mach-types.h>
> +#include <mach/spitz.h>
> +#include <mach/sharpsl_pm.h>
> +
> +extern struct sharpsl_pm_status sharpsl_pm;
> +
> +struct spitz_bat {
> + struct power_supply psy;
> +
> + bool (*is_present)(struct spitz_bat *bat);
> +};
> +
> +struct battery_thresh sharpsl_battery_levels[] = {
> + { 3980, 100 },
> + { 3900, 95 },
> + { 3860, 90 },
> + { 3800, 85 },
> + { 3760, 80 },
> + { 3720, 74 },
> + { 3680, 69 },
> + { 3620, 65 },
> + { 3570, 59 },
> + { 3560, 55 },
> + { 3550, 48 },
> + { 3530, 45 },
> + { 3510, 39 },
> + { 3490, 33 },
> + { 3470, 29 },
> + { 3450, 23 },
> + { 3410, 16 },
> + { 0, 0 },
> +};
> +
> +static struct spitz_bat spitz_bat_main, spitz_ac;
> +
> +extern int sharpsl_pm_pxa_read_max1111(int channel);
> +
> +typedef int milliamp_t;
> +typedef int milliohm_t;
> +typedef int millivolt_t;
> +typedef int microvolt_t;
> +
> +milliamp_t basic_current = 125;
> +milliohm_t battery_resistance = 100;
> +
> +/* 422 seems to be suitable for very old, 1Ah battery.
> + 2Ah battery probably has better resistance */
> +
> +/* Unfortunately, resistance depends on state of charge, current
> + * direction and temperature.
> + *
> + * Ouch, and dependency is actually _not_ too simple. It is lowest
> + * at 3.55V, very slowly rises at 4V (approximately linear dependency),
> + * and quickly rises towards 3.2V (in something exponential-looking).
> + *
> + * It is about same at 25Celsius and 40Celsius, and about 2.5x the value
> + * on 0Celsius, rising _very_ sharply.
> + *
> + * Li-ion should only be charged between 0 and 45 Celsius, and discharged
> + * between -20 and 60 celsius.
> + */
> +
> +extern int backlight_current;
> +
> +/* Positive values: current drawn from battery */
> +milliamp_t battery_current(void)
> +{
> + int bl_status = sharpsl_pm.machinfo->backlight_get_status ?
> sharpsl_pm.machinfo->backlight_get_status() : 0; +
> + printk("bl_status: %d\n", bl_status);

This and other debuging printks should probably be handled somehow ... different
? Also, why not use dev_info() ?

> +
> + if (sharpsl_pm.charge_mode == CHRG_ON)
> + return 0;
> +
> + /* FIXME: take backlight into account */
> + return basic_current;
> +}
> +
> +millivolt_t liion_internal_voltage(millivolt_t voltage, milliamp_t
> current_ma) +{
> + return voltage + (battery_resistance * current_ma / 1000);
> +}
> +
> +
> +static microvolt_t get_battery(void)
> +{
> + /* Thanks to Stanislav B. ADC has 3.3V as reference,
> + is connected to battery over 47kOhm,
> + and to ground over 100kOhm. */
> + int adc = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
> + return (adc * 1470 * 3300)/256;
> +}
> +
> +static int get_percentage(void)
> +{
> + int i = sharpsl_pm.machinfo->bat_levels - 1;
> + struct battery_thresh *thresh;
> + millivolt_t voltage = get_battery()/1000;
> +
> + thresh = sharpsl_battery_levels;
> +
> + while (i > 0 && (voltage > thresh[i].voltage))
> + i--;
> +
> + return thresh[i].percentage;
> +}
> +
> +static int get_status(union power_supply_propval *val)
> +{
> + if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0)
> + printk("Charge on. ");
> + if (gpio_get_value(SPITZ_GPIO_JK_B) == 0)
> + printk("Slow charge. ");

dev_info would be cool, though if this could be disabled, it'd be even cooler ;)
> +
> + val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +
> + if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> + else {
> + if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0)
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL))
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + }
> +
> + printk("ACIN: %d ",
> !!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)); + printk("Full:
> %d ", !!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL));
> + printk("Fatal: %d ",
> !!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL));
> + printk("Percent: %d\n", get_percentage());

DITTO

> +
> + return 0;
> +}
> +
> +static int spitz_bat_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + val->intval = 0;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_HEALTH:
> + /* POWER_SUPPLY_HEALTH_OVERHEAT , POWER_SUPPLY_HEALTH_COLD,
> + POWER_SUPPLY_HEALTH_OVERVOLTAGE, POWER_SUPPLY_HEALTH_UNSPEC_FAILURE,
> POWER_SUPPLY_HEALTH_GOOD + */

This comment shouldn't be here.

> + return 0;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
> + if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0) {
> + if (gpio_get_value(SPITZ_GPIO_JK_B) == 1)
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
> + else
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + }
> + return 0;
> + case POWER_SUPPLY_PROP_STATUS:
> + return get_status(val);
> + case POWER_SUPPLY_PROP_TECHNOLOGY:
> + val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
> + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + val->intval = get_battery();
> + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + val->intval = 4200000;
> + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> + val->intval = 3400000;
> + return 0;
> + case POWER_SUPPLY_PROP_TEMP:
> + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
> + sharpsl_pm.machinfo->measure_temp(1);
> + mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
> + val->intval = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
> + sharpsl_pm.machinfo->measure_temp(0);
> + return 0;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = "spitz-battery";
> + return 0;
> + case POWER_SUPPLY_PROP_PRESENT:
> + val->intval = 1;
> + return 0;
> + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> + val->intval = 2000000;
> + return 0;
> + case POWER_SUPPLY_PROP_CAPACITY:
> + val->intval = get_percentage();
> + return 0;
> + default:
> + return -EINVAL;
> + }
> + return -EINVAL;
> +}
> +
> +static int spitz_ac_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + val->intval = 0;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + /* Thanks to Stanislav B. ADC has 3.3V as reference,
> + is connected to acin over 2kOhm,
> + and to ground over 1kOhm. */
> + val->intval = (sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT) *
> 3000 * 3300)/256; + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> + val->intval = 5250000;
> + return 0;
> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> + val->intval = 4750000;
> + return 0;
> + case POWER_SUPPLY_PROP_MODEL_NAME:
> + val->strval = "spitz-power-supply";
> + return 0;
> + case POWER_SUPPLY_PROP_PRESENT:
> + val->intval = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
> + return 0;
> + default:
> + return -EINVAL;
> + }
> + return -EINVAL;
> +}
> +
> +static void spitz_bat_external_power_changed(struct power_supply *psy)
> +{
> +}
> +
> +static enum power_supply_property spitz_bat_main_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> + POWER_SUPPLY_PROP_TEMP,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> +};
> +
> +static struct spitz_bat spitz_bat_main = {
> + .psy = {
> + .name = "main-battery",
> + .type = POWER_SUPPLY_TYPE_BATTERY,
> + .properties = spitz_bat_main_props,
> + .num_properties = ARRAY_SIZE(spitz_bat_main_props),
> + .get_property = spitz_bat_get_property,
> + .external_power_changed = spitz_bat_external_power_changed,
> + .use_for_apm = 1,
> + },
> +};
> +
> +static enum power_supply_property spitz_ac_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> + POWER_SUPPLY_PROP_PRESENT,
> +};
> +
> +static struct spitz_bat spitz_ac = {
> + .psy = {
> + .name = "ac",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .properties = spitz_ac_props,
> + .num_properties = ARRAY_SIZE(spitz_ac_props),
> + .get_property = spitz_ac_get_property,
> + },
> +};
> +
> +#ifdef CONFIG_PM
> +static int spitz_bat_suspend(struct platform_device *dev, pm_message_t
> state) +{
> + return 0;
> +}
> +
> +static int spitz_bat_resume(struct platform_device *dev)
> +{
> + return 0;
> +}
> +#else
> +#define spitz_bat_suspend NULL
> +#define spitz_bat_resume NULL
> +#endif
> +
> +
> +
> +static int __devinit spitz_bat_probe(struct platform_device *dev)
> +{
> + if (!machine_is_spitz())
> + return -ENODEV;
> +
> + printk("spitz_bat_probe: register\n");
> + power_supply_register(&dev->dev, &spitz_bat_main.psy);
> + power_supply_register(&dev->dev, &spitz_ac.psy);
> + return 0;
> +}
> +
> +static int __devexit spitz_bat_remove(struct platform_device *dev)
> +{
> + power_supply_unregister(&spitz_bat_main.psy);
> + power_supply_unregister(&spitz_ac.psy);
> + return 0;
> +}
> +
> +
> +static struct platform_driver spitz_bat_driver = {
> + .driver.name = "spitz-battery",
> + .driver.owner = THIS_MODULE,
> + .probe = spitz_bat_probe,
> + .remove = __devexit_p(spitz_bat_remove),
> + .suspend = spitz_bat_suspend,
> + .resume = spitz_bat_resume,
> +};
> +
> +static int __init spitz_bat_init(void)
> +{
> + return platform_driver_register(&spitz_bat_driver);
> +}
> +
> +static void __exit spitz_bat_exit(void)
> +{
> + platform_driver_unregister(&spitz_bat_driver);
> +}
> +
> +module_init(spitz_bat_init);
> +module_exit(spitz_bat_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Pavel Machek");
> +MODULE_DESCRIPTION("Spitz battery driver");
> +MODULE_ALIAS("platform:spitz-battery");

Cheers ;)


\
 
 \ /
  Last update: 2011-05-21 19:31    [W:0.047 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site