lkml.org 
[lkml]   [2011]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 4/6] video, sm501: add OF binding to support SM501
On Tue, Mar 22, 2011 at 09:27:30AM +0100, Heiko Schocher wrote:
> - add binding to OF, compatible name "smi,sm501"
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Acked-by: Samuel Ortiz <sameo@linux.intel.com>

Merged, thanks.

g.

> cc: Wolfram Sang <w.sang@pengutronix.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> cc: linux-fbdev@vger.kernel.org
> cc: devicetree-discuss@ozlabs.org
> cc: Ben Dooks <ben@simtec.co.uk>
> cc: Vincent Sanders <vince@simtec.co.uk>
> cc: Samuel Ortiz <sameo@linux.intel.com>
> cc: linux-kernel@vger.kernel.org
> cc: Randy Dunlap <rdunlap@xenotime.net>
> cc: Wolfgang Denk <wd@denx.de>
> cc: Paul Mundt <lethal@linux-sh.org>
> ---
> - changes since v1:
> add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
> Paul Mundt.
> - changes since v2:
> add comments from Randy Dunlap:
> - move parameter documentation to Documentation/fb/sm501.txt
> - changes since v3:
> - rebased against v2.6.38-rc2
> - split in 3 patches
> - of support patch
> - get rid of "#if defined(CONFIG_PPC_MPC52xx)" usage
> hide this in DTS, as Paul suggested.
> - i/o routine patch
> - edid support patch
> - changes since v4
> replace remaining CONFIG_PPC_MPC52xx with CONFIG_OF, as
> it is no longer MPC52xx only.
> - changes since v5
> free edid_data after its usage, as it is no longer needed,
> suggested from Paul Mundt. Also fall back to default if
> kmemdup(edid_data) fails.
> - changes for v6:
> - repost complete patchserie
> - rebased against current head
>
> Documentation/powerpc/dts-bindings/sm501.txt | 34 +++++++++++++++++++++++++
> drivers/mfd/sm501.c | 8 +++++-
> drivers/video/sm501fb.c | 35 +++++++++++++++++++++++++-
> 3 files changed, 75 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/powerpc/dts-bindings/sm501.txt
>
> diff --git a/Documentation/powerpc/dts-bindings/sm501.txt b/Documentation/powerpc/dts-bindings/sm501.txt
> new file mode 100644
> index 0000000..7d319fb
> --- /dev/null
> +++ b/Documentation/powerpc/dts-bindings/sm501.txt
> @@ -0,0 +1,34 @@
> +* SM SM501
> +
> +The SM SM501 is a LCD controller, with proper hardware, it can also
> +drive DVI monitors.
> +
> +Required properties:
> +- compatible : should be "smi,sm501".
> +- reg : contain two entries:
> + - First entry: System Configuration register
> + - Second entry: IO space (Display Controller register)
> +- interrupts : SMI interrupt to the cpu should be described here.
> +- interrupt-parent : the phandle for the interrupt controller that
> + services interrupts for this device.
> +
> +Optional properties:
> +- mode : select a video mode:
> + <xres>x<yres>[-<bpp>][@<refresh>]
> +- edid : verbatim EDID data block describing attached display.
> + Data from the detailed timing descriptor will be used to
> + program the display controller.
> +- little-endian: availiable on big endian systems, to
> + set different foreign endian.
> +- big-endian: availiable on little endian systems, to
> + set different foreign endian.
> +
> +Example for MPC5200:
> + display@1,0 {
> + compatible = "smi,sm501";
> + reg = <1 0x00000000 0x00800000
> + 1 0x03e00000 0x00200000>;
> + interrupts = <1 1 3>;
> + mode = "640x480-32@60";
> + edid = [edid-data];
> + };
> diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> index 558d5f3..574f696 100644
> --- a/drivers/mfd/sm501.c
> +++ b/drivers/mfd/sm501.c
> @@ -1377,7 +1377,7 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
> sm501_register_gpio(sm);
> }
>
> - if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
> + if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
> if (!sm501_gpio_isregistered(sm))
> dev_err(sm->dev, "no gpio available for i2c gpio.\n");
> else
> @@ -1735,10 +1735,16 @@ static struct pci_driver sm501_pci_driver = {
>
> MODULE_ALIAS("platform:sm501");
>
> +static struct of_device_id __devinitdata of_sm501_match_tbl[] = {
> + { .compatible = "smi,sm501", },
> + { /* end */ }
> +};
> +
> static struct platform_driver sm501_plat_driver = {
> .driver = {
> .name = "sm501",
> .owner = THIS_MODULE,
> + .of_match_table = of_sm501_match_tbl,
> },
> .probe = sm501_plat_probe,
> .remove = sm501_plat_remove,
> diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
> index f31252c..f275385 100644
> --- a/drivers/video/sm501fb.c
> +++ b/drivers/video/sm501fb.c
> @@ -1729,6 +1729,15 @@ static int sm501fb_init_fb(struct fb_info *fb,
> FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
> FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
>
> +#if defined(CONFIG_OF)
> +#ifdef __BIG_ENDIAN
> + if (of_get_property(info->dev->parent->of_node, "little-endian", NULL))
> + fb->flags |= FBINFO_FOREIGN_ENDIAN;
> +#else
> + if (of_get_property(info->dev->parent->of_node, "big-endian", NULL))
> + fb->flags |= FBINFO_FOREIGN_ENDIAN;
> +#endif
> +#endif
> /* fixed data */
>
> fb->fix.type = FB_TYPE_PACKED_PIXELS;
> @@ -1933,8 +1942,32 @@ static int __devinit sm501fb_probe(struct platform_device *pdev)
> }
>
> if (info->pdata == NULL) {
> - dev_info(dev, "using default configuration data\n");
> + int found = 0;
> +#if defined(CONFIG_OF)
> + struct device_node *np = pdev->dev.parent->of_node;
> + const u8 *prop;
> + const char *cp;
> + int len;
> +
> info->pdata = &sm501fb_def_pdata;
> + if (np) {
> + /* Get EDID */
> + cp = of_get_property(np, "mode", &len);
> + if (cp)
> + strcpy(fb_mode, cp);
> + prop = of_get_property(np, "edid", &len);
> + if (prop && len == EDID_LENGTH) {
> + info->edid_data = kmemdup(prop, EDID_LENGTH,
> + GFP_KERNEL);
> + if (info->edid_data)
> + found = 1;
> + }
> + }
> +#endif
> + if (!found) {
> + dev_info(dev, "using default configuration data\n");
> + info->pdata = &sm501fb_def_pdata;
> + }
> }
>
> /* probe for the presence of each panel */
> --
> 1.7.4
>


\
 
 \ /
  Last update: 2011-05-03 00:31    [W:1.127 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site