lkml.org 
[lkml]   [2011]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH -v2] pci: Check bridge resources after resource allocation.
On Tue, May 10, 2011 at 06:19:17PM -0700, Yinghai Lu wrote:
> On 05/09/2011 03:36 PM, Linus Torvalds wrote:
> > On Mon, May 9, 2011 at 2:20 PM, Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> >>
> >> Linus? Bjorn? Ram?
> >
> > I dunno. The patch really makes me go "that looks *broken*". I really
> > dislike it. But maybe the crappiness of the patch comes from the
> > horror that is the current code.
>
> please check if this one is ok.

I like this approach than the earlier approach because it
closes the subtle bug _introduced_ by my earlier patch,
commit c8adf9a3e873eddaaec11ac410a99ef6b9656938

However i think the implementation can be made cleaner. Comments below..


>
> [PATCH] pci: Clear bridge resource flags if requested size is 0
>
> During pci remove/rescan testing found:
>
> [ 541.141614] pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
> [ 541.141965] pci 0000:c0:03.0: bridge window [io 0x1000-0x0fff]
> [ 541.159181] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff]
> [ 541.159540] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
> [ 541.179374] pci 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff])
> [ 541.199198] pci 0000:c0:03.0: Error enabling bridge (-22), continuing
> [ 541.199202] pci 0000:c0:03.0: enabling bus mastering
> [ 541.199209] pci 0000:c0:03.0: setting latency timer to 64
> [ 541.199917] pcieport 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff])
> [ 541.199963] pcieport: probe of 0000:c0:03.0 failed with error -22
>
> This bug was cause by commit
> | commit c8adf9a3e873eddaaec11ac410a99ef6b9656938
> | Author: Ram Pai <linuxram@us.ibm.com>
> | Date: Mon Feb 14 17:43:20 2011 -0800
> |
> | PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.
>
> After that commit, pci_hotplug_io_size is changed to additional_io_size from minium size.
> So it will not go through resource_size(res) != 0 path, and will not be reset there.
>
> The root cause is: pci_bridge_check_ranges will set RESOURCE_IO flag for pci
> bridge, and later if children do not need IO resource. those bridge
> resources will not need to be allocated. but flags is still there. that will
> confuse the the pci_enable_bridges later.
>
> related code:
> | static void assign_requested_resources_sorted(struct resource_list *head,
> | struct resource_list_x *fail_head)
> | {
> | struct resource *res;
> | struct resource_list *list;
> | int idx;
> |
> | for (list = head->next; list; list = list->next) {
> | res = list->res;
> | idx = res - &list->dev->resource[0];
> | if (resource_size(res) && pci_assign_resource(list->dev, idx)) {
> | ...
> | reset_resource(res);
> | }
> | }
> | }
>
> At last, We have to clear the flags in pbus_size_mem/io and etc.
>
> also need to update adjust_resources_sorted() to handle this special case if
> requested_size is 0, but add_size is not 0.
>
> after patch, will get right result:
> [ 621.206655] pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
> [ 621.206912] pci 0000:c0:03.0: bridge window [io disabled]
> [ 621.226594] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff]
> [ 621.226904] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
> [ 621.247012] pci 0000:c0:03.0: enabling bus mastering
> [ 621.247275] pci 0000:c0:03.0: setting latency timer to 64
> [ 621.267656] pcieport 0000:c0:03.0: setting latency timer to 64
> [ 621.268134] pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X
> [ 621.286832] pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt
> [ 621.306360] pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt
> [ 621.306684] pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded
> [ 621.326512] aer 0000:c0:03.0:pcie02: service driver aer loaded
> [ 621.326911] pciehp 0000:c0:03.0:pcie04: Hotplug Controller:
>
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
> ---
> drivers/pci/setup-bus.c | 31 +++++++++++++++++++++----------
> 1 file changed, 21 insertions(+), 10 deletions(-)
>
> Index: linux-2.6/drivers/pci/setup-bus.c
> ===================================================================
> --- linux-2.6.orig/drivers/pci/setup-bus.c
> +++ linux-2.6/drivers/pci/setup-bus.c
> @@ -138,9 +138,26 @@ static void adjust_resources_sorted(stru
> for (list = add_head->next; list;) {
> res = list->res;
> /* skip resource that has been reset */
> - if (!res->flags)
> + if (!res->flags && !res->start && !res->end)
> goto out;
>
> + idx = res - &list->dev->resource[0];


> + add_size = list->add_size;
> + if (!add_size) {
> + dev_warn(&list->dev->dev, "idx %d add_size == 0\n",
> + idx);
> + goto out;
> + }
This code is not needed. Because add_size will alway be greater than 0. The reason
it is in the add_list means that add_size is greater than 0.


> +
> + if (!resource_size(res)) {

There is assumption made in various sections of the code that
->start and ->size cannot be relied upon if ->flags is zero.

Though in this case we know that ->start and ->size are valid
even when ->flags is reset, the fact is not easily
recognizable.


> + /* need to restore the flag */
> + res->flags = list->flags;
> + res->end = res->start + add_size - 1;
> + if (pci_assign_resource(list->dev, idx))
> + reset_resource(res);
> + goto out;
> + }
> +
> /* skip this resource if not found in head list */
> for (hlist = head->next; hlist && hlist->res != res;
> hlist = hlist->next);
> @@ -150,16 +167,8 @@ static void adjust_resources_sorted(stru
> continue;
> }
>
> - idx = res - &list->dev->resource[0];
> - add_size=list->add_size;
> - if (!resource_size(res) && add_size) {
> - res->end = res->start + add_size - 1;
> - if(pci_assign_resource(list->dev, idx))
> - reset_resource(res);
> - } else if (add_size) {
> - adjust_resource(res, res->start,
> + adjust_resource(res, res->start,
> resource_size(res) + add_size);
> - }
> out:
> tmp = list;
> prev->next = list = list->next;
> @@ -596,6 +605,8 @@ static void pbus_size_io(struct pci_bus
> b_res->flags |= IORESOURCE_STARTALIGN;
> if (size1 > size0 && add_head)
> add_to_list(add_head, bus->self, b_res, size1-size0);
> + if (!size0)
> + b_res->flags = 0;

There is code above which resets the flag in if (!size && !size0) {.. b_res->flags = 0;}

We need to restructure this code to have a single place that resets the flag.

Also I choose to capture the necessary fields of b_res in the resource_list_x structure
and totally reset b_res.

pbus_size_io() function looks very clumsy to begin with. This patch will make it
even more clumsier unless restructured a litte.

> }
>
> /**
> @@ -693,6 +704,8 @@ static int pbus_size_mem(struct pci_bus
> b_res->flags |= IORESOURCE_STARTALIGN | mem64_mask;
> if (size1 > size0 && add_head)
> add_to_list(add_head, bus->self, b_res, size1-size0);
> + if (!size0)
> + b_res->flags = 0;

same here..

> return 1;
> }


\
 
 \ /
  Last update: 2011-05-12 20:09    [W:1.393 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site