lkml.org 
[lkml]   [2011]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] acpiphp: assume device is in state D0 after powering on a slot.
On Wed, 11 May 2011 17:00:32 +0100
Ian Campbell <ian.campbell@citrix.com> wrote:

> Devices which do not support PCI configuration space based power
> management may not otherwise be enabled.
>
> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
> ---
> drivers/pci/hotplug/acpiphp_glue.c | 7 +++++++
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> index 2f67e9b..a70fa89 100644
> --- a/drivers/pci/hotplug/acpiphp_glue.c
> +++ b/drivers/pci/hotplug/acpiphp_glue.c
> @@ -827,6 +827,13 @@ static int __ref enable_device(struct acpiphp_slot *slot)
> acpiphp_set_hpp_values(bus);
> acpiphp_set_acpi_region(slot);
> pci_enable_bridges(bus);
> +
> + list_for_each_entry(dev, &bus->devices, bus_list) {
> + /* Assume that newly added devices are powered on already. */
> + if (!dev->is_added)
> + dev->current_state = PCI_D0;
> + }
> +
> pci_bus_add_devices(bus);
>
> list_for_each_entry(func, &slot->funcs, sibling) {

applied to linux-next, thanks.

--
Jesse Barnes, Intel Open Source Technology Center


\
 
 \ /
  Last update: 2011-05-11 18:17    [W:0.329 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site