lkml.org 
[lkml]   [2011]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] s3fb: add DDC support
Date
On Monday 04 April 2011, Paul Mundt wrote:
> On Mon, Apr 04, 2011 at 10:33:16AM +0200, Ondrej Zajicek wrote:
> > On Sun, Apr 03, 2011 at 10:36:15PM +0200, Ondrej Zary wrote:
> > > Add I2C support for the DDC bus and also default mode initialization by
> > > reading monitor EDID to the s3fb driver.
> > >
> > > Tested on Trio64V+ (2 cards), Trio64V2/DX, Virge (3 cards),
> > > Virge/DX (3 cards), Virge/GX2, Trio3D/2X (4 cards), Trio3D.
> > >
> > > Will probably not work on Trio32 - my 2 cards have DDC support in BIOS
> > > that looks different from the other cards but the DDC pins on the VGA
> > > connector are not connected.
> > >
> > > Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> >
> > Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
>
> Is there much reason to leave this optional? Or are you simply waiting
> for testing feedback from Trio32 users before default-enabling it?
>
> It would generally be nice to avoid these sorts of config options for a
> specific driver if it already is quite capable of handling the
> unsupported cases and has a reasonable fallback on defaults via the error
> path.

If the config option is not desired, I'll remove it, I don't like it either.
Just did it like some other fb drivers do. The only reason why someone would
want to disable DDC is probably to have I2C-less kernel.

If the EDID cannot be read (old monitor connected or DDC pins not connected
like on Trio32 cards) or the card does not have enough memory (1280x1024 LCD
on a 1MB card), the driver falls back to 640x480-8@60.

--
Ondrej Zary


\
 
 \ /
  Last update: 2011-04-04 11:27    [W:0.101 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site