lkml.org 
[lkml]   [2011]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectWARNING: at arch/x86/mm/ioremap.c and mm/page_alloc.c
From
Date
Hi,

while trying to get an x86_64 kernel to run on an Fedora 15 32-bit
userland I get these warning in the dmesg. compiling this kernel for x86
with a similar config file doesn't show these warning.

any ideas?

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38.4 (thomas@localhost.localdomain) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #11 Sat Apr 30 12:32:25 CEST 2011
[ 0.000000] Command line: ro root=UUID=54c1f2-f119-4f97-b8e2-d827b8655edb LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys kgdboc=kms,kbd
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba63000 (usable)
[ 0.000000] BIOS-e820: 000000007ba63000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
[ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe0000 (usable)
[ 0.000000] BIOS-e820: 000000007bbe0000 - 000000007bbf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Acer Aspire 1810T/JM11-MS, BIOS v1.3310 03/25/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007bc00000
[ 0.000000] 0000000000 - 007bc00000 page 2M
[ 0.000000] kernel direct mapping tables up to 7bc00000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 377a8000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000007bbf6120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 000000007bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 000000007bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 000000007bb8d000 00040
[ 0.000000] ACPI: DMAR 000000007bbf5000 00068 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: HPET 000000007bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 000000007bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 000000007bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASF! 000000007bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 000000007bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 000000007bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 000000007bbe2000 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000007bbe1000 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 000000007bbe0000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079200000-ffff88007adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ba63
[ 0.000000] 0: 0x0007babf -> 0x0007bb80
[ 0.000000] 0: 0x0007bbbf -> 0x0007bbe0
[ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 506588
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6874 pages used for memmap
[ 0.000000] DMA32 zone: 495732 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007ba63000 - 000000007babf000
[ 0.000000] PM: Registered nosave memory: 000000007bb80000 - 000000007bbbf000
[ 0.000000] PM: Registered nosave memory: 000000007bbe0000 - 000000007bbf7000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 499652
[ 0.000000] Kernel command line: ro root=UUID=54c1f2-f119-4f97-b8e2-d827b8655edb LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys kgdboc=kms,kbd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x8a/0xa0()
[ 0.000000] Hardware name: Aspire 1810T
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
[ 0.000000] BIOS vendor: INSYDE; Ver: v1.3310; Product Version: v1.3310
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.38.4 #11
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8103175a>] ? warn_slowpath_common+0x7a/0xb0
[ 0.000000] [<ffffffff8146fa8b>] ? _etext+0x0/0x1ff575
[ 0.000000] [<ffffffff810317ea>] ? warn_slowpath_fmt_taint+0x3a/0x40
[ 0.000000] [<ffffffff8167db6c>] ? early_ioremap+0x13/0x15
[ 0.000000] [<ffffffff816783bd>] ? __acpi_map_table+0x13/0x19
[ 0.000000] [<ffffffff811fbe1a>] ? warn_invalid_dmar+0x8a/0xa0
[ 0.000000] [<ffffffff8123a785>] ? acpi_tb_verify_checksum+0x11/0x49
[ 0.000000] [<ffffffff8168d684>] ? check_zero_address+0x5d/0x116
[ 0.000000] [<ffffffff81239f14>] ? acpi_get_table_with_size+0x53/0xb4
[ 0.000000] [<ffffffff8167d1cd>] ? pci_swiotlb_init+0x0/0x21
[ 0.000000] [<ffffffff8146fa8b>] ? _etext+0x0/0x1ff575
[ 0.000000] [<ffffffff8168d754>] ? detect_intel_iommu+0x17/0x84
[ 0.000000] [<ffffffff81674511>] ? pci_iommu_alloc+0x8d/0xb8
[ 0.000000] [<ffffffff8167d649>] ? mem_init+0x19/0xe3
[ 0.000000] [<ffffffff8166f9d4>] ? start_kernel+0x1c1/0x392
[ 0.000000] [<ffffffff8166f322>] ? x86_64_start_reservations+0x132/0x136
[ 0.000000] [<ffffffff8166f41c>] ? x86_64_start_kernel+0xf6/0xfd
[ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] Memory: 1978368k/2027520k available (4542k kernel code, 1168k absent, 47984k reserved, 2041k data, 388k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1396.557 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.49 BogoMIPS (lpj=4655190)
[ 0.003517] pid_max: default: 32768 minimum: 301
[ 0.003640] Security Framework initialized
[ 0.003730] SELinux: Initializing.
[ 0.003821] SELinux: Starting in permissive mode
[ 0.003839] Mount-cache hash table entries: 256
[ 0.004074] Initializing cgroup subsys cpuacct
[ 0.004164] Initializing cgroup subsys devices
[ 0.004252] Initializing cgroup subsys freezer
[ 0.004339] Initializing cgroup subsys net_cls
[ 0.004425] Initializing cgroup subsys blkio
[ 0.006710] mce: CPU supports 6 MCE banks
[ 0.006804] CPU0: Thermal monitoring enabled (TM2)
[ 0.006891] using mwait in idle threads.
[ 0.006976] CPU: Intel(R) Core(TM)2 Solo CPU U3500 @ 1.40GHz stepping 0a
[ 0.007201] ACPI: Core revision 20110112
[ 0.016730] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.016948] ... version: 2
[ 0.017034] ... bit width: 40
[ 0.017121] ... generic registers: 2
[ 0.017206] ... value mask: 000000ffffffffff
[ 0.017294] ... max period: 000000007fffffff
[ 0.017383] ... fixed-purpose events: 3
[ 0.017469] ... event mask: 0000000700000003
[ 0.017660] DMAR: Host address width 36
[ 0.017747] DMAR: DRHD base: 0x00000000000000 flags: 0x1
[ 0.017837] DMAR: parse DMAR table failure.
[ 0.017925] Setting APIC routing to flat
[ 0.018363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053330] APIC calibration not consistent with PM-Timer: 449ms instead of 100ms
[ 0.053330] APIC delta adjusted to PM-Timer: 1246872 (5610906)
[ 0.053330] print_constraints: dummy:
[ 0.053330] NET: Registered protocol family 16
[ 0.053330] ACPI: bus type pci registered
[ 0.053330] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.053330] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.066950] PCI: Using configuration type 1 for base access
[ 0.068104] bio: create slab <bio-0> at 0
[ 0.070211] ACPI: EC: Look up EC in DSDT
[ 0.072117] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.074966] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.075944] ------------[ cut here ]------------
[ 0.076039] WARNING: at arch/x86/mm/ioremap.c:109 __ioremap_caller+0x360/0x370()
[ 0.076169] Hardware name: Aspire 1810T
[ 0.076255] Modules linked in:
[ 0.076380] Pid: 1, comm: swapper Tainted: G I 2.6.38.4 #11
[ 0.076470] Call Trace:
[ 0.076558] [<ffffffff8103175a>] ? warn_slowpath_common+0x7a/0xb0
[ 0.076653] [<ffffffff8145edd1>] ? acpi_os_map_memory+0x70/0x12d
[ 0.076666] [<ffffffff810317a5>] ? warn_slowpath_null+0x15/0x20
[ 0.076757] [<ffffffff81021340>] ? __ioremap_caller+0x360/0x370
[ 0.076849] [<ffffffff810c5d4f>] ? kmem_cache_alloc+0x8f/0xb0
[ 0.076939] [<ffffffff8102137f>] ? ioremap_cache+0xf/0x20
[ 0.077029] [<ffffffff8145edd1>] ? acpi_os_map_memory+0x70/0x12d
[ 0.077122] [<ffffffff8122fc42>] ? acpi_ex_system_memory_space_handler+0xe2/0x1e3
[ 0.077255] [<ffffffff8122fb60>] ? acpi_ex_system_memory_space_handler+0x0/0x1e3
[ 0.077388] [<ffffffff81228327>] ? acpi_ev_address_space_dispatch+0x174/0x1c3
[ 0.077519] [<ffffffff81229138>] ? acpi_ev_system_memory_region_setup+0x0/0x6e
[ 0.077650] [<ffffffff8122b5ee>] ? acpi_ex_region_read+0x36/0x5d
[ 0.077741] [<ffffffff8122b824>] ? acpi_ex_load_op+0x9f/0x256
[ 0.077832] [<ffffffff8122d8a3>] ? acpi_ex_opcode_1A_1T_0R+0x25/0x4b
[ 0.077924] [<ffffffff81225625>] ? acpi_ds_exec_end_op+0xf5/0x3e4
[ 0.078803] [<ffffffff81237ce0>] ? acpi_ps_parse_loop+0x7b8/0x950
[ 0.078895] [<ffffffff81225eca>] ? acpi_ds_call_control_method+0x106/0x198
[ 0.078988] [<ffffffff812370df>] ? acpi_ps_parse_aml+0x93/0x274
[ 0.079078] [<ffffffff81238526>] ? acpi_ps_execute_method+0x1c9/0x273
[ 0.079171] [<ffffffff81233a06>] ? acpi_ns_evaluate+0xda/0x1a5
[ 0.079261] [<ffffffff8123348a>] ? acpi_evaluate_object+0xfa/0x1f3
[ 0.079355] [<ffffffff8121ead1>] ? acpi_processor_set_pdc+0x174/0x19a
[ 0.079447] [<ffffffff8121eb79>] ? early_init_pdc+0x82/0x85
[ 0.079538] [<ffffffff81235214>] ? acpi_ns_walk_namespace+0xbb/0x17b
[ 0.079630] [<ffffffff8121eaf7>] ? early_init_pdc+0x0/0x85
[ 0.079721] [<ffffffff8121eaf7>] ? early_init_pdc+0x0/0x85
[ 0.079811] [<ffffffff8123332e>] ? acpi_walk_namespace+0x8e/0xc8
[ 0.079903] [<ffffffff8168ffd8>] ? acpi_init+0x0/0xd8
[ 0.079998] [<ffffffff816902d6>] ? acpi_early_processor_set_pdc+0x3a/0x53
[ 0.080091] [<ffffffff8168feb1>] ? acpi_bus_init+0xb6/0x1dd
[ 0.080183] [<ffffffff811cca7e>] ? kobject_create_and_add+0x3e/0x80
[ 0.080275] [<ffffffff81690049>] ? acpi_init+0x71/0xd8
[ 0.080364] [<ffffffff810002ae>] ? do_one_initcall+0x3e/0x170
[ 0.080457] [<ffffffff8166fc5d>] ? kernel_init+0xb8/0x139
[ 0.080547] [<ffffffff8102cb96>] ? schedule_tail+0x16/0x50
[ 0.080638] [<ffffffff81003834>] ? kernel_thread_helper+0x4/0x10
[ 0.080730] [<ffffffff8166fba5>] ? kernel_init+0x0/0x139
[ 0.080819] [<ffffffff81003830>] ? kernel_thread_helper+0x0/0x10
[ 0.080910] ---[ end trace a7919e7f17c0a726 ]---
[ 0.081015] ------------[ cut here ]------------
[ 0.081107] WARNING: at mm/page_alloc.c:2012 __alloc_pages_nodemask+0x620/0x7e0()
[ 0.081236] Hardware name: Aspire 1810T
[ 0.081321] Modules linked in:
[ 0.081445] Pid: 1, comm: swapper Tainted: G W I 2.6.38.4 #11
[ 0.081535] Call Trace:
[ 0.081620] [<ffffffff8103175a>] ? warn_slowpath_common+0x7a/0xb0
[ 0.081712] [<ffffffff810317a5>] ? warn_slowpath_null+0x15/0x20
[ 0.081803] [<ffffffff81097d50>] ? __alloc_pages_nodemask+0x620/0x7e0
[ 0.081896] [<ffffffff8145ee74>] ? acpi_os_map_memory+0x113/0x12d
[ 0.081987] [<ffffffff8122fc42>] ? acpi_ex_system_memory_space_handler+0xe2/0x1e3
[ 0.082118] [<ffffffff81228327>] ? acpi_ev_address_space_dispatch+0x174/0x1c3
[ 0.082250] [<ffffffff81229138>] ? acpi_ev_system_memory_region_setup+0x0/0x6e
[ 0.082381] [<ffffffff81097f22>] ? __get_free_pages+0x12/0x50
[ 0.082473] [<ffffffff810c5f38>] ? __kmalloc+0x118/0x150
[ 0.082563] [<ffffffff8122b635>] ? acpi_os_allocate+0x20/0x22
[ 0.082652] [<ffffffff8122b859>] ? acpi_ex_load_op+0xd4/0x256
[ 0.082744] [<ffffffff8122d8a3>] ? acpi_ex_opcode_1A_1T_0R+0x25/0x4b
[ 0.082835] [<ffffffff81225625>] ? acpi_ds_exec_end_op+0xf5/0x3e4
[ 0.082927] [<ffffffff81237ce0>] ? acpi_ps_parse_loop+0x7b8/0x950
[ 0.083018] [<ffffffff81225eca>] ? acpi_ds_call_control_method+0x106/0x198
[ 0.083111] [<ffffffff812370df>] ? acpi_ps_parse_aml+0x93/0x274
[ 0.083202] [<ffffffff81238526>] ? acpi_ps_execute_method+0x1c9/0x273
[ 0.083332] [<ffffffff81233a06>] ? acpi_ns_evaluate+0xda/0x1a5
[ 0.083423] [<ffffffff8123348a>] ? acpi_evaluate_object+0xfa/0x1f3
[ 0.083515] [<ffffffff8121ead1>] ? acpi_processor_set_pdc+0x174/0x19a
[ 0.083608] [<ffffffff8121eb79>] ? early_init_pdc+0x82/0x85
[ 0.083698] [<ffffffff81235214>] ? acpi_ns_walk_namespace+0xbb/0x17b
[ 0.083790] [<ffffffff8121eaf7>] ? early_init_pdc+0x0/0x85
[ 0.083881] [<ffffffff8121eaf7>] ? early_init_pdc+0x0/0x85
[ 0.083970] [<ffffffff8123332e>] ? acpi_walk_namespace+0x8e/0xc8
[ 0.084061] [<ffffffff8168ffd8>] ? acpi_init+0x0/0xd8
[ 0.084150] [<ffffffff816902d6>] ? acpi_early_processor_set_pdc+0x3a/0x53
[ 0.084243] [<ffffffff8168feb1>] ? acpi_bus_init+0xb6/0x1dd
[ 0.084334] [<ffffffff811cca7e>] ? kobject_create_and_add+0x3e/0x80
[ 0.084426] [<ffffffff81690049>] ? acpi_init+0x71/0xd8
[ 0.084516] [<ffffffff810002ae>] ? do_one_initcall+0x3e/0x170
[ 0.084606] [<ffffffff8166fc5d>] ? kernel_init+0xb8/0x139
[ 0.084696] [<ffffffff8102cb96>] ? schedule_tail+0x16/0x50
[ 0.084786] [<ffffffff81003834>] ? kernel_thread_helper+0x4/0x10
[ 0.084878] [<ffffffff8166fba5>] ? kernel_init+0x0/0x139
[ 0.084967] [<ffffffff81003830>] ? kernel_thread_helper+0x0/0x10
[ 0.085057] ---[ end trace a7919e7f17c0a727 ]---
[ 0.085146] ACPI Error: Method parse/execution failed [\_PR_.CPU1.APPT] (Node ffff880078c6ac58), AE_NO_MEMORY (20110112/psparse-536)
[ 0.085454] ACPI Error: Method parse/execution failed [\_PR_.CPU1.GCAP] (Node ffff880078c6ac08), AE_NO_MEMORY (20110112/psparse-536)
[ 0.085756] ACPI Error: Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff880078c6abb8), AE_NO_MEMORY (20110112/psparse-536)
[ 0.086471] ACPI Error: Method parse/execution failed [\_PR_.CPU1.APCT] (Node ffff880078c6ac30), AE_NO_MEMORY (20110112/psparse-536)
[ 0.086791] ACPI Error: Method parse/execution failed [\_PR_.CPU2.GCAP] (Node ffff880078c6acd0), AE_NO_MEMORY (20110112/psparse-536)
[ 0.087093] ACPI Error: Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff880078c6ac80), AE_NO_MEMORY (20110112/psparse-536)
[ 0.088016] ACPI: Interpreter enabled
[ 0.088103] ACPI: (supports S0 S3 S4 S5)
[ 0.088388] ACPI: Using IOAPIC for interrupt routing
[ 0.094731] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.095031] ACPI: No dock devices found.
[ 0.095117] HEST: Table not found.
[ 0.095203] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.095755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.096655] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.096664] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.096756] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.096888] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.097031] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.097056] DMAR: Forcing write-buffer flush capability
[ 0.097144] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.097256] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.097271] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.097281] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.097288] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
[ 0.097325] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.097338] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
[ 0.097425] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.097488] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
[ 0.097569] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.099996] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
[ 0.123360] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.123367] pci 0000:00:1a.7: PME# disabled
[ 0.123401] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.123423] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
[ 0.123504] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.123510] pci 0000:00:1b.0: PME# disabled
[ 0.123537] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.123621] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.123627] pci 0000:00:1c.0: PME# disabled
[ 0.123660] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.123744] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.123749] pci 0000:00:1c.3: PME# disabled
[ 0.123790] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.123869] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
[ 0.123947] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.124026] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
[ 0.124108] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.124188] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
[ 0.124275] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.128607] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
[ 0.151972] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.151978] pci 0000:00:1d.7: PME# disabled
[ 0.152005] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.153329] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.153486] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.153515] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
[ 0.153527] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
[ 0.153540] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
[ 0.153552] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
[ 0.153563] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 0.153576] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
[ 0.153627] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.153632] pci 0000:00:1f.2: PME# disabled
[ 0.153657] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.153680] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
[ 0.153712] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 0.153828] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
[ 0.153858] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
[ 0.153874] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
[ 0.153973] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.153979] pci 0000:01:00.0: PME# disabled
[ 0.160008] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.160100] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.160106] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.160115] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.160205] pci 0000:02:00.0: [8086:4232] type 0 class 0x000280
[ 0.160246] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
[ 0.160405] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.160413] pci 0000:02:00.0: PME# disabled
[ 0.166678] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.166769] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.166775] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.166783] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.166870] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.166966] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.166973] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.166982] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.166986] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.166989] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.166993] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.166996] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.167018] pci_bus 0000:00: on NUMA node 0
[ 0.167023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.167328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.167407] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.167483] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.173038] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.175757] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.176319] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.176886] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.177447] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.178123] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.178804] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.179364] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.180007] SCSI subsystem initialized
[ 0.180134] libata version 3.00 loaded.
[ 0.180204] usbcore: registered new interface driver usbfs
[ 0.180309] usbcore: registered new interface driver hub
[ 0.180419] usbcore: registered new device driver usb
[ 0.180552] PCI: Using ACPI for IRQ routing
[ 0.180639] PCI: pci_cache_line_size set to 64 bytes
[ 0.180722] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.180725] reserve RAM buffer: 000000007ba63000 - 000000007bffffff
[ 0.180729] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
[ 0.180733] reserve RAM buffer: 000000007bbe0000 - 000000007bffffff
[ 0.180736] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.180840] NetLabel: Initializing
[ 0.180925] NetLabel: domain hash size = 128
[ 0.181010] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.181110] NetLabel: unlabeled traffic allowed by default
[ 0.181203] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.181298] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.181587] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.186686] Switching to clocksource hpet
[ 0.186806] pnp: PnP ACPI init
[ 0.186905] ACPI: bus type pnp registered
[ 0.187423] pnp 00:00: [bus 00-ff]
[ 0.187427] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.187430] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.187433] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.187436] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.187439] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.187442] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.187444] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.187447] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.187450] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.187453] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.187456] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.187459] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.187462] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.187464] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.187467] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.187470] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.187473] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.187476] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.187479] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.187532] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.187714] pnp 00:01: [io 0x002e-0x002f]
[ 0.187717] pnp 00:01: [io 0x004e-0x004f]
[ 0.187720] pnp 00:01: [io 0x164e-0x164f]
[ 0.187722] pnp 00:01: [io 0x0061]
[ 0.187724] pnp 00:01: [io 0x0070]
[ 0.187727] pnp 00:01: [io 0x0080]
[ 0.187729] pnp 00:01: [io 0x0092]
[ 0.187731] pnp 00:01: [io 0x00b2-0x00b3]
[ 0.187734] pnp 00:01: [io 0x0063]
[ 0.187739] pnp 00:01: [io 0x0065]
[ 0.187741] pnp 00:01: [io 0x0067]
[ 0.187743] pnp 00:01: [io 0x0600-0x060f]
[ 0.187746] pnp 00:01: [io 0x0610]
[ 0.187748] pnp 00:01: [io 0x0800-0x080f]
[ 0.187750] pnp 00:01: [io 0x0810-0x0817]
[ 0.187753] pnp 00:01: [io 0x0820-0x0823]
[ 0.187755] pnp 00:01: [io 0x0400-0x047f]
[ 0.187758] pnp 00:01: [io 0x0500-0x053f]
[ 0.187760] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.187763] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.187765] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.187768] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.187771] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.187773] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.187776] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.187778] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.187781] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.187783] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.187811] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
[ 0.188016] system 00:01: [io 0x0600-0x060f] has been reserved
[ 0.188108] system 00:01: [io 0x0610] has been reserved
[ 0.188199] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.188290] system 00:01: [io 0x0810-0x0817] has been reserved
[ 0.188381] system 00:01: [io 0x0820-0x0823] has been reserved
[ 0.188473] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.188563] system 00:01: [io 0x0500-0x053f] has been reserved
[ 0.188655] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.188748] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.188841] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.188934] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.189027] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.189119] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.189212] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.189305] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.189398] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.189491] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.189584] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.189599] pnp 00:02: [io 0x0000-0x001f]
[ 0.189601] pnp 00:02: [io 0x0081-0x0091]
[ 0.189604] pnp 00:02: [io 0x0093-0x009f]
[ 0.189606] pnp 00:02: [io 0x00c0-0x00df]
[ 0.189609] pnp 00:02: [dma 4]
[ 0.189644] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.189676] pnp 00:03: [io 0x0070-0x0077]
[ 0.189711] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.189804] pnp 00:04: [irq 0 disabled]
[ 0.189813] pnp 00:04: [irq 8]
[ 0.189816] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.189852] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.189870] pnp 00:05: [io 0x00f0]
[ 0.189876] pnp 00:05: [irq 13]
[ 0.189912] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.189926] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.189967] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.189967] Switched to NOHz mode on CPU #0
[ 0.189977] pnp 00:07: [io 0x0060]
[ 0.189980] pnp 00:07: [io 0x0064]
[ 0.189985] pnp 00:07: [irq 1]
[ 0.190034] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.190059] pnp 00:08: [irq 12]
[ 0.190105] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
[ 0.190216] pnp: PnP ACPI: found 9 devices
[ 0.190302] ACPI: ACPI bus type pnp unregistered
[ 0.196722] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.196814] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.196908] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
[ 0.197002] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
[ 0.197137] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.197227] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.197321] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
[ 0.197415] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
[ 0.197550] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.197637] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.197729] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.197820] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.197925] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.198019] pci 0000:00:1c.0: setting latency timer to 64
[ 0.198029] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.198122] pci 0000:00:1c.3: setting latency timer to 64
[ 0.198130] pci 0000:00:1e.0: setting latency timer to 64
[ 0.198135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.198138] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.198141] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.198144] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.198148] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.198151] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
[ 0.198154] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[ 0.198158] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.198161] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
[ 0.198164] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[ 0.198168] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.198171] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.198174] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.198177] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.198206] NET: Registered protocol family 2
[ 0.198333] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.198791] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.201454] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.201905] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.201997] TCP reno registered
[ 0.202083] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.202196] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.202452] NET: Registered protocol family 1
[ 0.202562] pci 0000:00:02.0: Boot video device
[ 0.230047] PCI: CLS 64 bytes, default 64
[ 0.230119] Trying to unpack rootfs image as initramfs...
[ 0.481407] Freeing initrd memory: 8480k freed
[ 0.486315] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.487199] Simple Boot Flag at 0x44 set to 0x1
[ 0.488002] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 0.488116] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.488396] audit: initializing netlink socket (disabled)
[ 0.488504] type=2000 audit(1304171775.486:1): initialized
[ 0.501304] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.503902] VFS: Disk quotas dquot_6.5.2
[ 0.504037] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.504657] msgmni has been set to 3880
[ 0.504804] SELinux: Registering netfilter hooks
[ 0.505084] alg: No test for stdrng (krng)
[ 0.505230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.505379] io scheduler noop registered
[ 0.505467] io scheduler deadline registered
[ 0.505603] io scheduler cfq registered (default)
[ 0.505773] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.505832] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.505921] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.505974] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[ 0.506085] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.506203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.506296] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.506730] intel_idle: MWAIT substates: 0x3122220
[ 0.506733] intel_idle: does not run on family 6 model 23
[ 0.507180] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.507635] ACPI: AC Adapter [ACAD] (on-line)
[ 0.507990] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.508127] ACPI: Power Button [PWRB]
[ 0.508267] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.510054] ACPI: Lid Switch [LID0]
[ 0.510197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.510331] ACPI: Sleep Button [SLPB]
[ 0.510481] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.510613] ACPI: Power Button [PWRF]
[ 0.510853] ACPI: acpi_idle registered with cpuidle
[ 0.510996] Monitor-Mwait will be used to enter C-1 state
[ 0.510999] Monitor-Mwait will be used to enter C-2 state
[ 0.511002] Monitor-Mwait will be used to enter C-3 state
[ 0.511006] Marking TSC unstable due to TSC halts in idle
[ 0.512655] ERST: Table is not found!
[ 0.512798] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.513492] Non-volatile memory driver v1.3
[ 0.513582] Linux agpgart interface v0.103
[ 0.513710] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.513972] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.515350] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.515544] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.515693] [drm] Initialized drm 1.1.0 20060810
[ 0.515808] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.515905] i915 0000:00:02.0: setting latency timer to 64
[ 0.517906] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.518058] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.596643] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 0.596650] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.596770] [drm] Driver supports precise vblank timestamp query.
[ 1.121220] fbcon: inteldrmfb (fb0) is primary device
[ 1.135288] Console: switching to colour frame buffer device 170x48
[ 1.139569] fb0: inteldrmfb frame buffer device
[ 1.139601] drm: registered panic notifier
[ 1.141192] acpi device:03: registered as cooling_device1
[ 1.141407] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.141474] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 1.141653] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.142846] brd: module loaded
[ 1.142962] ahci 0000:00:1f.2: version 3.0
[ 1.142975] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.143068] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.143113] ahci: SSS flag set, parallel bus scan disabled
[ 1.143196] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 1.143254] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
[ 1.143314] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.163983] scsi0 : ahci
[ 1.164101] scsi1 : ahci
[ 1.164192] scsi2 : ahci
[ 1.164283] scsi3 : ahci
[ 1.164379] scsi4 : ahci
[ 1.164469] scsi5 : ahci
[ 1.164550] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 43
[ 1.164604] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 43
[ 1.164654] ata3: DUMMY
[ 1.164674] ata4: DUMMY
[ 1.164695] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 43
[ 1.164749] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 43
[ 1.166529] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.168206] atl1c 0000:01:00.0: setting latency timer to 64
[ 1.253587] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 1.255266] console [netcon0] enabled
[ 1.256917] netconsole: network logging started
[ 1.258589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.260246] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.261914] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.261919] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.263622] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.265294] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.270798] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.270811] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
[ 1.283350] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.284979] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.286628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.288243] usb usb1: Product: EHCI Host Controller
[ 1.289827] usb usb1: Manufacturer: Linux 2.6.38.4 ehci_hcd
[ 1.291452] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.293112] hub 1-0:1.0: USB hub found
[ 1.294683] hub 1-0:1.0: 2 ports detected
[ 1.296319] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.297880] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.297884] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.299458] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.301045] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.306439] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.306450] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
[ 1.320023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.321552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.323079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.324597] usb usb2: Product: EHCI Host Controller
[ 1.326122] usb usb2: Manufacturer: Linux 2.6.38.4 ehci_hcd
[ 1.327631] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.329191] hub 2-0:1.0: USB hub found
[ 1.330639] hub 2-0:1.0: 6 ports detected
[ 1.332115] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.333555] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.335012] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.336446] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.336451] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.337874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.339281] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
[ 1.340722] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.342138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.343600] usb usb3: Product: UHCI Host Controller
[ 1.345056] usb usb3: Manufacturer: Linux 2.6.38.4 uhci_hcd
[ 1.346538] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.348089] hub 3-0:1.0: USB hub found
[ 1.349582] hub 3-0:1.0: 2 ports detected
[ 1.351119] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.352655] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.352659] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.354234] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.355866] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 1.357586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.359146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.360744] usb usb4: Product: UHCI Host Controller
[ 1.362252] usb usb4: Manufacturer: Linux 2.6.38.4 uhci_hcd
[ 1.363787] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.365424] hub 4-0:1.0: USB hub found
[ 1.366945] hub 4-0:1.0: 2 ports detected
[ 1.368488] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.370071] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.370076] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.371656] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.373321] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 1.374924] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.376486] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.378042] usb usb5: Product: UHCI Host Controller
[ 1.379572] usb usb5: Manufacturer: Linux 2.6.38.4 uhci_hcd
[ 1.381085] usb usb5: SerialNumber: 0000:00:1d.1
[ 1.382734] hub 5-0:1.0: USB hub found
[ 1.384290] hub 5-0:1.0: 2 ports detected
[ 1.385866] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.387416] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.387421] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.388958] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.390513] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
[ 1.392072] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.393613] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.395167] usb usb6: Product: UHCI Host Controller
[ 1.396717] usb usb6: Manufacturer: Linux 2.6.38.4 uhci_hcd
[ 1.398233] usb usb6: SerialNumber: 0000:00:1d.2
[ 1.399847] hub 6-0:1.0: USB hub found
[ 1.401382] hub 6-0:1.0: 2 ports detected
[ 1.403026] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.412131] i8042: Detected active multiplexing controller, rev 1.1
[ 1.417271] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.418830] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.420399] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.421947] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.423453] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.424955] mousedev: PS/2 mouse device common for all mice
[ 1.426758] rtc_cmos 00:03: RTC can wake from S4
[ 1.428281] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.429776] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.431460] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.433169] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 1.434762] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 1.436372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.437887] iTCO_vendor_support: vendor-support=0
[ 1.439658] device-mapper: uevent: version 1.0.3
[ 1.441211] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.442932] device-mapper: multipath: version 1.2.0 loaded
[ 1.444448] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.445975] device-mapper: multipath queue-length: version 0.1.0 loaded
[ 1.447587] device-mapper: multipath service-time: version 0.2.0 loaded
[ 1.449198] cpuidle: using governor ladder
[ 1.450799] cpuidle: using governor menu
[ 1.452522] usbcore: registered new interface driver usbhid
[ 1.454025] usbhid: USB HID core driver
[ 1.455532] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.457421] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.458957] TCP cubic registered
[ 1.460455] Initializing XFRM netlink socket
[ 1.462019] NET: Registered protocol family 17
[ 1.463600] registered taskstats version 1
[ 1.465592] rtc_cmos 00:03: setting system clock to 2011-04-30 13:56:17 UTC (1304171777)
[ 1.636706] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 1.643377] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.692461] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001J, max UDMA/100
[ 1.694094] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.696460] ata1.00: configured for UDMA/100
[ 1.698153] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[ 1.699903] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.701605] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.703265] sd 0:0:0:0: [sda] Write Protect is off
[ 1.704871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.704897] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.757677] sda: sda1 sda2 sda3 sda4
[ 1.759612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.762790] usb 2-4: New USB device found, idVendor=058f, idProduct=6366
[ 1.764521] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.766271] usb 2-4: Product: Mass Storage Device
[ 1.767965] usb 2-4: Manufacturer: Generic
[ 1.769666] usb 2-4: SerialNumber: 058F63666433
[ 1.876701] usb 2-5: new high speed USB device using ehci_hcd and address 3
[ 2.020046] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.041055] usb 2-5: New USB device found, idVendor=064e, idProduct=a102
[ 2.042819] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 2.044589] usb 2-5: Product: WebCam
[ 2.046360] usb 2-5: Manufacturer: SuYin
[ 2.048114] usb 2-5: SerialNumber: CN0316-S30C-OV061-VA-R02.02.02
[ 2.238499] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 2.285052] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input5
[ 2.315143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[ 2.340066] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.660100] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.662777] Freeing unused kernel memory: 388k freed
[ 2.707782] <30>dracut: dracut-009-6.fc15
[ 2.733258] <30>udev[121]: starting version 167
[ 2.834647] <30>dracut: Starting plymouth daemon
[ 3.114162] Initializing USB Mass Storage driver...
[ 3.115983] scsi6 : usb-storage 2-4:1.0
[ 3.118050] usbcore: registered new interface driver usb-storage
[ 3.119787] USB Mass Storage support registered.
[ 3.449844] <30>dracut: luksOpen /dev/sda3 luksHome
[ 4.248702] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 4.253584] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 4.833573] sd 6:0:0:0: [sdb] 246016 512-byte logical blocks: (125 MB/120 MiB)
[ 4.836187] sd 6:0:0:0: [sdb] Write Protect is off
[ 4.838061] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 4.838809] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4.840662] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.845556] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4.847384] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.850322] sdb: sdb1
[ 4.859682] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4.861461] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4.863213] sd 6:0:0:0: [sdb] Attached SCSI removable disk




\
 
 \ /
  Last update: 2011-04-30 18:41    [W:0.048 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site