lkml.org 
[lkml]   [2011]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Fixed gpio polarity of gpio USB-phy reset.
Date
With commit 19403165 a main part of ehci-omap.c moved to
drivers/mfd/omap-usb-host.c created by commit 17cdd29d.
Due to this reorganisation the polarity used to reset the
external USB phy changed and USB host doesn't recognize
any devices.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
---
drivers/mfd/omap-usb-host.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 53450f4..491cac5 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -719,14 +719,14 @@ static int usbhs_enable(struct device *dev)
gpio_request(pdata->ehci_data->reset_gpio_port[0],
"USB1 PHY reset");
gpio_direction_output
- (pdata->ehci_data->reset_gpio_port[0], 1);
+ (pdata->ehci_data->reset_gpio_port[0], 0);
}

if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
gpio_request(pdata->ehci_data->reset_gpio_port[1],
"USB2 PHY reset");
gpio_direction_output
- (pdata->ehci_data->reset_gpio_port[1], 1);
+ (pdata->ehci_data->reset_gpio_port[1], 0);
}

/* Hold the PHY in RESET for enough time till DIR is high */
@@ -906,11 +906,11 @@ static int usbhs_enable(struct device *dev)

if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_set_value
- (pdata->ehci_data->reset_gpio_port[0], 0);
+ (pdata->ehci_data->reset_gpio_port[0], 1);

if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_set_value
- (pdata->ehci_data->reset_gpio_port[1], 0);
+ (pdata->ehci_data->reset_gpio_port[1], 1);
}

end_count:
--
1.7.0.4


\
 
 \ /
  Last update: 2011-04-14 09:35    [W:0.083 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site