lkml.org 
[lkml]   [2011]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: reboot/kexec in 2.6.38
    On Tue, Apr 12, 2011 at 10:43 PM, Cyril Hrubis <metan@ucw.cz> wrote:
    > Hi!
    >> >> I think it's config issue. Never heard of this.
    >> >
    >> > I've just compiled and booted 2.6.38. The kernel boots without problems when
    >> > flashed in. But I've had no success with kexec, the last lines I see are:
    >> >
    >> > Starting new kernel
    >>
    >> Enable early_printk to a serial port if you can.
    >>
    >> There is definitely an issue in 2.6.38 where kdump doesn't work, that
    >> right now looks like a memblock issue.
    >
    > Finaly got time to solder serial adapter...
    >
    > And now, after I configured kernel to print to both ttyS0 serial console and
    > tty0 the kexec started to work.

    Cool. Please help check why it didn't work, and see if we have something
    broken.

    >
    > --
    > metan
    >


    \
     
     \ /
      Last update: 2011-04-12 17:15    [W:0.020 / U:30.892 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site