lkml.org 
[lkml]   [2011]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] mmc: sdhci: make sdhci-pltfm device drivers self registered
On Thu, Mar 31, 2011 at 09:33:22AM -0600, Grant Likely wrote:
> On Fri, Mar 25, 2011 at 04:48:47PM +0800, Shawn Guo wrote:
> > The patch turns the common stuff in sdhci-pltfm.c into functions, and
> > add device drivers their own .probe and .remove which in turn call
> > into the common functions, so that those sdhci-pltfm device drivers
> > register itself and keep all device specific things away from common
> > sdhci-pltfm file.
> >
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
>
> Looks really good. Relatively minor comments below, but you can add
> this to the next version:
>
> Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
>
Thanks for the review.

[...]
> > +
> > +static int __devinit sdhci_cns3xxx_probe(struct platform_device *pdev)
> > +{
> > + struct sdhci_host *host;
> > + int ret;
> > +
> > + host = sdhci_pltfm_init(pdev, &sdhci_cns3xxx_pdata);
> > + if (!host)
> > + return -ENOMEM;
> > +
> > + ret = sdhci_add_host(host);
> > + if (ret)
> > + goto err_add_host;
> > +
> > + return 0;
> > +
> > +err_add_host:
> > + sdhci_pltfm_free(pdev);
> > + return ret;
> > +}
>
> This pattern in this function is used by 2 drivers in this patch, and
> 2 more users (with the addition of an sdhci_get_of_property() call) in
> the 3rd patch. An sdchi_pltfm_register(pdev, &pdata) that does the
> whole sequence would probably be valuable. Same for the _remove hook.
>
OK, one more pair of helper function will be added.

> Drivers that still need 2 stage registration, like the tegra driver,
> would still be able to call sdhci_pltfm_init() and sdhci_add_host()
> directly.
>
> > +
> > +static int __devexit sdhci_cns3xxx_remove(struct platform_device *pdev)
> > +{
> > + struct sdhci_host *host = platform_get_drvdata(pdev);
> > + int dead = 0;
> > + u32 scratch;
> > +
> > + scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
> > + if (scratch == (u32)-1)
> > + dead = 1;
> > +
> > + sdhci_remove_host(host, dead);
>
> The following would be equivalent to the above three lines:
>
> sdhci_remove_host(host, scratch == (u32)-1);
>
OK.

[...]
> > @@ -3,7 +3,7 @@
> > *
> > * Author: Saeed Bishara <saeed@marvell.com>
> > * Mike Rapoport <mike@compulab.co.il>
> > - * Based on sdhci-cns3xxx.c
> > + * Based on sdhci-dove.c
>
> This file *is* sdhci-dove.c. Did you intend this change? :-)
>
My bad.

[...]
> > +#ifdef CONFIG_OF
> > + plat = kzalloc(sizeof(*plat), GFP_KERNEL);
> > + if (!plat) {
> > + rc = -ENOMEM;
> > + goto err_no_plat;
> > + }
> > + pdev->dev.platform_data = plat;
> > +
> > + plat->cd_gpio = of_get_gpio(pdev->dev.of_node, 0);
> > + plat->wp_gpio = of_get_gpio(pdev->dev.of_node, 1);
> > + plat->power_gpio = of_get_gpio(pdev->dev.of_node, 2);
> > +
> > + dev_info(&pdev->dev, "using gpios cd=%i, wp=%i power=%i\n",
> > + plat->cd_gpio, plat->wp_gpio, plat->power_gpio);
> > +#endif
>
> This will need to be reworked for mainline since the Tegra device tree
> support only exists in my git tree. Basing it on devicetree/arm would
> work.
>
OK. Will against mmc-next and test esdhc dt changes on devicetree/arm.

--
Regards,
Shawn



\
 
 \ /
  Last update: 2011-04-01 08:11    [W:1.192 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site