lkml.org 
[lkml]   [2011]   [Mar]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The pat
From
On Wed, Mar 9, 2011 at 3:27 PM, Robin Becker <replabrobin@gmail.com> wrote:
> From: replabrobin <robin@reportlab.com>
please use short subject for this commit, and move the description
into the commit description section
aslo, I would split this to two patches, one fixes the LED color name,
the second for adding the new LED.

>  static unsigned int sheevaplug_mpp_config[] __initdata = {
>        MPP29_GPIO,     /* USB Power Enable */
> -       MPP49_GPIO,     /* LED */
> +       MPP46_GPIO,     /* RED LED */
> +       MPP49_GPIO,     /* BLUE LED */
>        0
>  };
>
>  static unsigned int sheeva_esata_mpp_config[] __initdata = {
>        MPP29_GPIO,     /* USB Power Enable */
>        MPP44_GPIO,     /* SD Write Protect */
> +       MPP46_GPIO,     /* RED LED */
>        MPP47_GPIO,     /* SD Card Detect */
>        MPP49_GPIO,     /* LED Green */
please fix the comment as well
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-03-09 15:19    [W:0.046 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site