lkml.org 
[lkml]   [2011]   [Mar]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[56/73] e1000e: 82579 PHY incorrectly identified during init
2.6.37-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Bruce Allan <bruce.w.allan@intel.com>

commit 664dc878ed6f0476b875547547a49e06f7a4e73b upstream.

During init, reading the 2 PHY ID registers back-to-back in the default
fast mode could return invalid data (all F's) and in slow mode could
return data to the second read the data from the first read. To resolve
the issue in fast mode, set to slow mode before any PHY accesses; to
resolve the issue in slow mode, put in a delay for every 82579 PHY access.
Since this PHY is currently only paired with the pch2lan MAC and the PHY
type is not known before the first PHY access which can fail this way,
check for this based on MAC-type.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


---
drivers/net/e1000e/ich8lan.c | 16 +++++++++++-----
drivers/net/e1000e/phy.c | 14 ++++++++++++++
2 files changed, 25 insertions(+), 5 deletions(-)

--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,12 +338,17 @@ static s32 e1000_init_phy_params_pchlan(
}

phy->id = e1000_phy_unknown;
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- goto out;
- if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+ switch (hw->mac.type) {
+ default:
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+ break;
+ /* fall-through */
+ case e1000_pch2lan:
/*
- * In case the PHY needs to be in mdio slow mode (eg. 82577),
+ * In case the PHY needs to be in mdio slow mode,
* set slow mode and try to get the PHY id again.
*/
ret_val = e1000_set_mdio_slow_mode_hv(hw);
@@ -352,6 +357,7 @@ static s32 e1000_init_phy_params_pchlan(
ret_val = e1000e_get_phy_id(hw);
if (ret_val)
goto out;
+ break;
}
phy->type = e1000e_get_phy_type_from_id(phy->id);

--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -226,6 +226,13 @@ s32 e1000e_read_phy_reg_mdic(struct e100
}
*data = (u16) mdic;

+ /*
+ * Allow some time after each MDIC transaction to avoid
+ * reading duplicate data in the next MDIC transaction.
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ udelay(100);
+
return 0;
}

@@ -279,6 +286,13 @@ s32 e1000e_write_phy_reg_mdic(struct e10
return -E1000_ERR_PHY;
}

+ /*
+ * Allow some time after each MDIC transaction to avoid
+ * reading duplicate data in the next MDIC transaction.
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ udelay(100);
+
return 0;
}




\
 
 \ /
  Last update: 2011-03-06 12:31    [W:0.024 / U:1.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site