lkml.org 
[lkml]   [2011]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5] fat: Batched discard support for fat
Date
Kyungmin Park <kmpark@infradead.org> writes:

>>> +     start = range->start >> sb->s_blocksize_bits;
>>> +     start = start / sbi->sec_per_clus;
>>
>> start is round-down, I think it's strange interface. E.g. user specified
>> the range as "start=10 len=1024". So the range should be 10-1034,
>> i.e. (assume cluster-size is 512) 512-1024, right?
>
> I don't know what's the correct way? If you're right. it's better to round-up.
> If cluster-size is 32KiB and start sector is in the middle of cluster,
> then which is better. round-down or round-up?

It depends on the design of this interface though, I bet it's round-up,
and should use same way with other FSes.

>>> +     minlen = range->minlen >> sb->s_blocksize_bits;
>>> +     minlen = minlen / sbi->sec_per_clus;
>>> +     trimmed = 0;
>>> +     count = 0;
>>> +     err = -EINVAL;
>>> +
>>> +     lock_fat(sbi);
>>> +     if (sbi->free_clusters != -1 && sbi->free_clus_valid)
>>> +             goto out;
>>
>> free clusters count validation doesn't matter here. If you want to check
>> free cluster count, you should check free_clusters==0 or not (after
>> validation).
>
> I borrowed it from "fat_count_free_clusters()". anyway fill fix it.

Yes. fat_count_free_clusters() needs to check free_clusters value,
because it updates free_clusters value. If it's uptodate, does nothing.

>>> +     if (start < FAT_START_ENT)
>>> +             start = FAT_START_ENT;
>>
>> Valid data cluster is 2 - max_cluster, but it should be mapped to 0 -
>> (max_cluster - FAT_START_ENT). Otherwise this interface's abstraction is
>> useless, right?
>
> user program don't know the filesystem internals. The same program is
> used for ext4 and fat. so it should be handled at filesystem.

Yes. It's what I'm saying. If user wants to trim 0-2 then user will
specify 0-2, but this trims only 2. It's not right.

>>> +     fatent_set_entry(&fatent, start);
>>> +
>>> +     while (count < sbi->max_cluster) {
>>> +             if (fatent.entry >= sbi->max_cluster)
>>> +                     fatent.entry = FAT_START_ENT;
>>
>> Why do we cyclic this?
> If the start is middle and len is the whole disk size, then check the
> all clusters.

Strange design. If user wants to trim between middle and end, user have
to know length from middle correctly? Ext4 really does it?

Thanks.
--
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-03-28 08:23    [W:0.061 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site