lkml.org 
[lkml]   [2011]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/1] m68k: merge m68k and m68knommu arch directories
Hi All,

I am ready to send a request to Linus to pull this in.
Anyone not ready for this to happen?

Regards
Greg


On 22/03/11 14:43, gerg@snapgear.com wrote:
> The following patch merges the m68k and m68knommu arch directories.
> This patch has been trimmed for review purposes - the automated file
> moving and mergeing carried out by the script contained in this email
> has been removed. Only the manually required changes after running the
> script are shown as the patch. (So to end up with the final required
> change you need to run this script then apply the patch).
>
> This change is available as the only commit on the m68knommu git tree,
> for-linux branch:
>
> The following changes since commit a952baa034ae7c2e4a66932005cbc7ebbccfe28d:
> Linus Torvalds (1):
> Merge branch 'for-linus' of git://git.kernel.org/.../dtor/input
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git for-linus
>
> Greg Ungerer (1):
> m68k: merge m68k and m68knommu arch directories
>
>
> It is also on the for-next branch in that tree, so will get some testing
> in the next tree for the next few days.
>
> I have done some testing on both MMU and non-MMU targets, and they
> worked fine. I tried a few ColdFire non-MMU builds, and I built and
> ran the Atari target in the AranyM emulator. Other than some option
> re-ordering the configs produced are the same.
>
> If everyone is happy I would like to ask Linus to pull this before the
> end of the current merge window.
>
> Regards
> Greg
>
>
> -----
>
> #!/bin/bash
>
> mergefile() {
> BASE=${1%.?}
> EXT=${1#${BASE}}
> git mv ${TARGET}/$1 ${TARGET}/${BASE}_mm${EXT}
> git mv ${SOURCE}/$1 ${TARGET}/${BASE}_no${EXT}
> cat<<-EOF> ${TARGET}/$1
> #ifdef CONFIG_MMU
> #include "${BASE}_mm${EXT}"
> #else
> #include "${BASE}_no${EXT}"
> #endif
> EOF
> git add ${TARGET}/$1
> }
>
> mergedir() {
> TARGET=arch/m68k/$1
> SOURCE=arch/m68knommu/$1
> files=${1}_MERGE_FILES
> MERGE_FILES=${!files}
>
> echo "merging files in $1"
> for F in $MERGE_FILES ; do
> mergefile $F
> done
>
> files=${1}_NOMERGE_FILES
> NOMERGE_FILES=${!files}
>
> echo "moving files in $1"
> for F in $NOMERGE_FILES ; do
> git mv ${SOURCE}/$F ${TARGET}/$F
> done
>
> files=${1}_REMOVE_FILES
> REMOVE_FILES=${!files}
>
> echo "removing common files in $1"
> for F in $REMOVE_FILES ; do
> git rm ${SOURCE}/$F
> done
>
> if [ -e ${SOURCE}/Makefile ]; then
> git mv ${TARGET}/Makefile ${TARGET}/Makefile_mm
> git mv ${SOURCE}/Makefile ${TARGET}/Makefile_no
> cat<<-EOF> ${TARGET}/Makefile
> ifdef CONFIG_MMU
> include ${TARGET}/Makefile_mm
> else
> include ${TARGET}/Makefile_no
> endif
> EOF
> git add ${TARGET}/Makefile
> fi
> }
>
> configs_MERGE_FILES=""
> configs_NOMERGE_FILES="m5208evb_defconfig \
> m5272c3_defconfig \
> m5307c3_defconfig \
> m5249evb_defconfig \
> m5275evb_defconfig \
> m5407c3_defconfig"
> configs_REMOVE_FILES=""
> kernel_MERGE_FILES="asm-offsets.c \
> dma.c entry.S \
> m68k_ksyms.c \
> module.c \
> process.c \
> ptrace.c \
> setup.c \
> signal.c \
> sys_m68k.c \
> time.c \
> traps.c \
> vmlinux.lds.S"
> kernel_NOMERGE_FILES="init_task.c \
> irq.c \
> syscalltable.S"
> kernel_REMOVE_FILES=""
> lib_MERGE_FILES="checksum.c \
> muldi3.c"
> lib_NOMERGE_FILES="delay.c \
> divsi3.S \
> memcpy.c \
> memmove.c \
> memset.c \
> modsi3.S \
> mulsi3.S \
> udivsi3.S \
> umodsi3.S"
> lib_REMOVE_FILES="ashldi3.c \
> ashrdi3.c \
> lshrdi3.c"
> mm_MERGE_FILES="init.c kmap.c"
> mm_NOMERGE_FILES=""
> mm_REMOVE_FILES=""
>
> DIRS="configs kernel lib mm"
>
> echo "STARTing merge"
> for dir in $DIRS ; do
> echo "merging $dir..."
> mergedir $dir
> done
> echo "moving platform"
> git mv arch/m68knommu/platform arch/m68k/
> git rm arch/m68knommu/defconfig
>
> echo "merging master Makefile"
> git mv arch/m68k/Makefile arch/m68k/Makefile_mm
> git mv arch/m68knommu/Makefile arch/m68k/Makefile_no
> cat<<-EOF> arch/m68k/Makefile
> ifdef CONFIG_MMU
> include arch/m68k/Makefile_mm
> else
> include arch/m68k/Makefile_no
> endif
> EOF
> git add arch/m68k/Makefile
>
> echo "removing remaining m68knommu dirs"
> git rm -r arch/m68knommu
> rm -r arch/m68knommu
> exit 0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>


--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com


\
 
 \ /
  Last update: 2011-03-25 13:03    [W:0.121 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site