lkml.org 
[lkml]   [2011]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] cleanup: Add 'struct dev' in the TTM layer to be passed in for DMA API calls.
From
On Thu, Mar 24, 2011 at 10:25 AM, Konrad Rzeszutek Wilk
<konrad.wilk@oracle.com> wrote:
> On Thu, Mar 24, 2011 at 08:52:20AM +0100, Thomas Hellstrom wrote:
>> On 03/23/2011 03:52 PM, Konrad Rzeszutek Wilk wrote:
>> >On Wed, Mar 23, 2011 at 02:17:18PM +0100, Thomas Hellstrom wrote:
>> >>On 03/23/2011 01:51 PM, Konrad Rzeszutek Wilk wrote:
>> >>>>>I was thinking about this a bit after I found that the PowerPC requires
>> >>>>>the 'struct dev'. But I got a question first, what do you with pages
>> >>>>>that were allocated to a device that can do 64-bit DMA and then
>> >>>>>move it to a device than can 32-bit DMA? Obviously the 32-bit card would
>> >>>>>set the TTM_PAGE_FLAG_DMA32 flag, but the 64-bit would not. What is the
>> >>>>>process then? Allocate a new page from the 32-bit device and then copy over the
>> >>>>>page from the 64-bit TTM and put the 64-bit TTM page?
>> >>>>Yes, in certain situations we need to copy, and if it's necessary in
>> >>>>some cases to use coherent memory with a struct device assoicated
>> >>>>with it, I agree it may be reasonable to do a copy in that case as
>> >>>>well. I'm against, however, to make that the default case when
>> >>>>running on bare metal.
>> >>>This situation could occur on native/baremetal. When you say 'default
>> >>>case' you mean for every type of page without consulting whether it
>> >>>had the TTM_PAGE_FLAG_DMA32?
>> >>No, Basically I mean a device that runs perfectly fine with
>> >>alloc_pages(DMA32) on bare metal shouldn't need to be using
>> >>dma_alloc_coherent() on bare metal, because that would mean we'd need
>> >>to take the copy path above.
>> >I think we got the scenarios confused (or I did at least).
>> >The scenario I used ("I was thinking.."), the 64-bit device would do
>> >alloc_page(GFP_HIGHUSER) and if you were to move it to a 32-bit device
>> >it would have to make a copy of the page as it could not reach the page
>> >from GFP_HIGUSER.
>> >
>> >The other scenario, which I think is what you are using, is that
>> >we have a 32-bit device allocating a page, so TTM_PAGE_FLAG_DMA32 is set
>> >and then we if we were to move it a 64-bit device it would need to
>> >copied. But I don't think that is the case - the page would be
>> >reachable by the 64-bit device. Help me out please if I am misunderstanding this.
>>
>> Yes, this is completely correct.
>>
>> Now, with a struct dev attached to each page in a 32-bit system
>> (coherent memory)
>> we would need to always copy in the 32-bit case, since you can't
>> hand over pages
>> belonging to other physical devices.
>> But on bare metal you don't need coherent memory, but in this case you
>> need to copy anyway becase you choose to allocate coherent memory.
>
> Ok, can we go back one more step back. I am unclear about one other
> thing. Lets think on this in terms of 2.6.38 code.
>
> When a page in the TTM pool is being moved back and forth and also changes
> the caching model, what happens on the free part? Is the original caching
> state put back on it? Say I allocated a DMA32 page (GFP_DMA32), and move it
> to another pool for another radeon device. I also do some cache changes:
> make it write-back, then  un-cached, then writeback, and when I am done, I
> return it back to the pool (DMA32). Once that is done I want to unload
> the DRM/TTM driver. Does that page get its caching state reverted
> back to what it originally had (probably un-cached)? And where is this done?

When ultimately being free all the page are set to write back again as
it's default of all allocated page (see ttm_pages_put). ttm_put_pages
will add page to the correct pool (uc or wc).

>
>>
>> I see a sort of a hackish way around these problems.
>>
>> Let's say ttm were trying to detect a hypervisor dummy virtual
>> device sitting on the pci bus. That device would perhaps provide pci
>> information detailing what GFP masks needing to
>> allocate coherent memory. The TTM page pool could then grab that
>> device and create a struct dev to use for allocating "anonymous" TTM
>> BO memory.
>>
>> Could that be a way forward? The struct dev would then be private to
>> the page pool code, bare metal wouldn't need to allocate coherent
>> memory, since the virtual device wouldn't be present. The page pool
>> code would need to be updated to be able to cache also coherent
>> pages.
>>
>> Xen would need to create such a device in the guest with a suitable
>> PCI ID that it would be explicitly willing to share with other
>> hypervisor suppliers....
>>
>> It's ugly, I know, but it might work...
>
> Or just create a phantom 'struct device' that is used with
> the TTM layer. And it has the lowest common denominator of the
> different graphic cards that exist. But that is a bit strange b/c
> for some machines (IBM boxes), you have per-device DMA API specific
> calls. This depends on what PCI bus you have the card as some of these
> boxes have multiple IOMMUs. So that wouldn't work that nicely..
>
> How about a backend TTM alloc API? So the calls to 'ttm_get_page'
> and 'ttm_put_page' call to a TTM-alloc API to do allocation.
>
> The default one is the native, and it would have those 'dma_alloc_coherent'
> removed.  When booting under virtualized
> environment a virtualisation "friendly" backend TTM alloc would
> register and all calls to 'put/get/probe' would be diverted to it.
> 'probe' would obviously check whether it should use this backend or not.
>
> It would mean two new files: drivers/gpu/drm/ttm/ttm-memory-xen.c and
> a ttm-memory-generic.c and some header work.
>
> It would still need to keep the 'dma_address[i]' around so that
> those can be passed to the radeon/nouveau GTT, but for native it
> could just contain BAD_DMA_ADDRESS - and the code in the radeon/nouveau
> GTT binding is smart to figure out to do 'pci_map_single' if the
> dma_addr_t has BAD_DMA_ADDRESS.
>
> The issuer here is with the caching I had a question about. We
> would need to reset the caching state back to the original one
> before free-ing it. So does the TTM pool de-alloc code deal with this?
>

Sounds doable. Thought i don't understand why you want virtualized
guest to be able to use hw directly. From my point of view all device
in a virtualized guest should be virtualized device that talks to the
host system driver.

Cheers,
Jerome
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2011-03-24 17:09    [W:0.072 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site