lkml.org 
[lkml]   [2011]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PM8921 MFD V4 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver
Grant Likely,

Can you please review/ack this one?

Abhijeet

adharmap@codeaurora.org wrote:
> From: David Collins <collinsd@codeaurora.org>
>
> Add support for multi-purpose pins (MPPs) on Qualcomm PM8xxx
> PMIC chips.
>
> PM8xxx MPPs can be configured as digital or analog inputs or
> outputs, current sinks, or buffers.
>
> Note that mpp pins appear as gpio lines to the kernel. However they
> are implemented separately from the pmic's gpio driver as
> mpps have different configuration attributes and have different
> register controls than the pmic's gpio controller. Basically they are
> different set of pins.
>
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> ---
> drivers/gpio/Kconfig | 8 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/pm8xxx-mpp.c | 326 +++++++++++++++++++++++++++++++++++++
> drivers/mfd/pm8921-core.c | 31 ++++
> include/linux/mfd/pm8xxx/mpp.h | 233 ++++++++++++++++++++++++++
> include/linux/mfd/pm8xxx/pm8921.h | 9 +-
> 6 files changed, 607 insertions(+), 1 deletions(-)
> create mode 100644 drivers/gpio/pm8xxx-mpp.c
> create mode 100644 include/linux/mfd/pm8xxx/mpp.h
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 52c233e..7ada3b1 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -419,4 +419,12 @@ config GPIO_PM8XXX
> This option enables support for on-chip GPIO found on Qualcomm PM8xxx
> PMICs.
>
> +config MFD_PM8XXX_MPP
> + tristate "Support for Qualcomm PM8xxx MPP features"
> + depends on MFD_PM8XXX
> + default y if MFD_PM8XXX
> + help
> + This is the multi-purpose pin (MPP) driver for Qualcomm PM 8xxx PMIC
> + chips.
> +
> endif
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 10efe6c..0452caf 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -43,3 +43,4 @@ obj-$(CONFIG_GPIO_SX150X) += sx150x.o
> obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o
> obj-$(CONFIG_GPIO_ML_IOH) += ml_ioh_gpio.o
> obj-$(CONFIG_GPIO_PM8XXX) += pm8xxx-gpio.o
> +obj-$(CONFIG_MFD_PM8XXX_MPP) += pm8xxx-mpp.o
> diff --git a/drivers/gpio/pm8xxx-mpp.c b/drivers/gpio/pm8xxx-mpp.c
> new file mode 100644
> index 0000000..6e90e91
> --- /dev/null
> +++ b/drivers/gpio/pm8xxx-mpp.c
> @@ -0,0 +1,326 @@
> +/*
> + * Qualcomm PM8XXX Multi-Purpose Pin (MPP) driver
> + *
> + * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> +#include <linux/platform_device.h>
> +#include <linux/gpio.h>
> +#include <linux/seq_file.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/mfd/pm8xxx/core.h>
> +#include <linux/mfd/pm8xxx/mpp.h>
> +
> +/* MPP Type */
> +#define PM8XXX_MPP_TYPE_MASK 0xE0
> +#define PM8XXX_MPP_TYPE_SHIFT 5
> +
> +/* MPP Config Level */
> +#define PM8XXX_MPP_CONFIG_LVL_MASK 0x1C
> +#define PM8XXX_MPP_CONFIG_LVL_SHIFT 2
> +
> +/* MPP Config Control */
> +#define PM8XXX_MPP_CONFIG_CTRL_MASK 0x03
> +#define PM8XXX_MPP_CONFIG_CTRL_SHIFT 0
> +
> +struct pm8xxx_mpp_chip {
> + struct list_head link;
> + struct gpio_chip gpio_chip;
> + spinlock_t pm_lock;
> + u8 *ctrl_reg;
> + int mpp_base;
> + int irq_base;
> + int nmpps;
> + u16 base_addr;
> +};
> +
> +static LIST_HEAD(pm8xxx_mpp_chips);
> +static DEFINE_MUTEX(pm8xxx_mpp_chips_lock);
> +
> +static int pm8xxx_mpp_write(struct pm8xxx_mpp_chip *mpp_chip, u16 offset,
> + u8 val, u8 mask)
> +{
> + u8 reg;
> + int rc;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&mpp_chip->pm_lock, flags);
> +
> + reg = (mpp_chip->ctrl_reg[offset] & ~mask) | (val & mask);
> + rc = pm8xxx_writeb(mpp_chip->gpio_chip.dev->parent,
> + mpp_chip->base_addr + offset, reg);
> + if (!rc)
> + mpp_chip->ctrl_reg[offset] = reg;
> +
> + spin_unlock_irqrestore(&mpp_chip->pm_lock, flags);
> +
> + return rc;
> +}
> +
> +static int pm8xxx_mpp_to_irq(struct gpio_chip *chip, unsigned offset)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip = dev_get_drvdata(chip->dev);
> +
> + return mpp_chip->irq_base + offset;
> +}
> +
> +static int pm8xxx_mpp_get(struct gpio_chip *chip, unsigned offset)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip = dev_get_drvdata(chip->dev);
> + int rc;
> +
> + if ((mpp_chip->ctrl_reg[offset] & PM8XXX_MPP_TYPE_MASK) >>
> + PM8XXX_MPP_TYPE_SHIFT == PM8XXX_MPP_TYPE_D_OUTPUT)
> + rc = mpp_chip->ctrl_reg[offset] & PM8XXX_MPP_CONFIG_CTRL_MASK;
> + else
> + rc = pm8xxx_read_irq_stat(mpp_chip->gpio_chip.dev->parent,
> + mpp_chip->irq_base + offset);
> +
> + return rc;
> +}
> +
> +static void pm8xxx_mpp_set(struct gpio_chip *chip, unsigned offset, int val)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip = dev_get_drvdata(chip->dev);
> + u8 reg = val ? PM8XXX_MPP_DOUT_CTRL_HIGH : PM8XXX_MPP_DOUT_CTRL_LOW;
> + int rc;
> +
> + rc = pm8xxx_mpp_write(mpp_chip, offset, reg,
> + PM8XXX_MPP_CONFIG_CTRL_MASK);
> + if (rc)
> + pr_err("pm8xxx_mpp_write(): rc=%d\n", rc);
> +}
> +
> +static int pm8xxx_mpp_dir_input(struct gpio_chip *chip, unsigned offset)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip = dev_get_drvdata(chip->dev);
> + int rc = pm8xxx_mpp_write(mpp_chip, offset,
> + PM8XXX_MPP_TYPE_D_INPUT << PM8XXX_MPP_TYPE_SHIFT,
> + PM8XXX_MPP_TYPE_MASK);
> +
> + if (rc)
> + pr_err("pm8xxx_mpp_write(): rc=%d\n", rc);
> + return rc;
> +}
> +
> +static int pm8xxx_mpp_dir_output(struct gpio_chip *chip,
> + unsigned offset, int val)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip = dev_get_drvdata(chip->dev);
> + u8 reg = (PM8XXX_MPP_TYPE_D_OUTPUT << PM8XXX_MPP_TYPE_SHIFT) |
> + (val & PM8XXX_MPP_CONFIG_CTRL_MASK);
> + u8 mask = PM8XXX_MPP_TYPE_MASK | PM8XXX_MPP_CONFIG_CTRL_MASK;
> + int rc = pm8xxx_mpp_write(mpp_chip, offset, reg, mask);
> +
> + if (rc)
> + pr_err("pm8xxx_mpp_write(): rc=%d\n", rc);
> + return rc;
> +}
> +
> +static void pm8xxx_mpp_dbg_show(struct seq_file *s, struct gpio_chip *chip)
> +{
> + static const char * const ctype[] = { "d_in", "d_out", "bi_dir",
> + "a_in", "a_out", "sink",
> + "dtest_sink", "dtest_out"
> + };
> + struct pm8xxx_mpp_chip *mpp_chip = dev_get_drvdata(chip->dev);
> + u8 type, state;
> + const char *label;
> + int i;
> +
> + for (i = 0; i < mpp_chip->nmpps; i++) {
> + label = gpiochip_is_requested(chip, i);
> + type = (mpp_chip->ctrl_reg[i] & PM8XXX_MPP_TYPE_MASK) >>
> + PM8XXX_MPP_TYPE_SHIFT;
> + state = pm8xxx_mpp_get(chip, i);
> + seq_printf(s, "gpio-%-3d (%-12.12s) %-10.10s"
> + " %s 0x%02x\n",
> + chip->base + i,
> + label ? label : "--",
> + ctype[type],
> + state ? "hi" : "lo",
> + mpp_chip->ctrl_reg[i]);
> + }
> +}
> +
> +int pm8xxx_mpp_config(unsigned mpp, unsigned type, unsigned level,
> + unsigned control)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip;
> + int rc, found = 0;
> + u8 config, mask;
> +
> + mutex_lock(&pm8xxx_mpp_chips_lock);
> + list_for_each_entry(mpp_chip, &pm8xxx_mpp_chips, link) {
> + if (mpp >= mpp_chip->mpp_base
> + && mpp < mpp_chip->mpp_base + mpp_chip->nmpps) {
> + found = 1;
> + break;
> + }
> + }
> + mutex_unlock(&pm8xxx_mpp_chips_lock);
> + if (!found) {
> + pr_err("called on mpp %d not handled by any pmic\n", mpp);
> + return -EINVAL;
> + }
> +
> + mask = PM8XXX_MPP_TYPE_MASK | PM8XXX_MPP_CONFIG_LVL_MASK |
> + PM8XXX_MPP_CONFIG_CTRL_MASK;
> + config = (type << PM8XXX_MPP_TYPE_SHIFT) & PM8XXX_MPP_TYPE_MASK;
> + config |= (level << PM8XXX_MPP_CONFIG_LVL_SHIFT) &
> + PM8XXX_MPP_CONFIG_LVL_MASK;
> + config |= control & PM8XXX_MPP_CONFIG_CTRL_MASK;
> +
> + rc = pm8xxx_mpp_write(mpp_chip, mpp - mpp_chip->mpp_base, config, mask);
> +
> + if (rc)
> + pr_err("pm8xxx_mpp_write(): rc=%d\n", rc);
> +
> + return rc;
> +}
> +EXPORT_SYMBOL_GPL(pm8xxx_mpp_config);
> +
> +static int __devinit pm8xxx_mpp_reg_init(struct pm8xxx_mpp_chip *mpp_chip)
> +{
> + int rc, i;
> +
> + for (i = 0; i < mpp_chip->nmpps; i++) {
> + rc = pm8xxx_readb(mpp_chip->gpio_chip.dev->parent,
> + mpp_chip->base_addr + i,
> + &mpp_chip->ctrl_reg[i]);
> + if (rc) {
> + pr_err("failed to read register 0x%x rc=%d\n",
> + mpp_chip->base_addr + i, rc);
> + return rc;
> + }
> + }
> + return 0;
> +}
> +
> +static int __devinit pm8xxx_mpp_probe(struct platform_device *pdev)
> +{
> + int rc;
> + const struct pm8xxx_mpp_platform_data *pdata = pdev->dev.platform_data;
> + struct pm8xxx_mpp_chip *mpp_chip;
> +
> + if (!pdata) {
> + pr_err("missing platform data\n");
> + return -EINVAL;
> + }
> +
> + mpp_chip = kzalloc(sizeof(struct pm8xxx_mpp_chip), GFP_KERNEL);
> + if (!mpp_chip) {
> + pr_err("Cannot allocate %d bytes\n",
> + sizeof(struct pm8xxx_mpp_chip));
> + return -ENOMEM;
> + }
> +
> + mpp_chip->ctrl_reg = kzalloc(pdata->core_data.nmpps, GFP_KERNEL);
> + if (!mpp_chip->ctrl_reg) {
> + pr_err("Cannot allocate %d bytes\n", pdata->core_data.nmpps);
> + rc = -ENOMEM;
> + goto free_mpp_chip;
> + }
> +
> + spin_lock_init(&mpp_chip->pm_lock);
> +
> + mpp_chip->gpio_chip.label = PM8XXX_MPP_DEV_NAME;
> + mpp_chip->gpio_chip.direction_input = pm8xxx_mpp_dir_input;
> + mpp_chip->gpio_chip.direction_output = pm8xxx_mpp_dir_output;
> + mpp_chip->gpio_chip.to_irq = pm8xxx_mpp_to_irq;
> + mpp_chip->gpio_chip.get = pm8xxx_mpp_get;
> + mpp_chip->gpio_chip.set = pm8xxx_mpp_set;
> + mpp_chip->gpio_chip.dbg_show = pm8xxx_mpp_dbg_show;
> + mpp_chip->gpio_chip.ngpio = pdata->core_data.nmpps;
> + mpp_chip->gpio_chip.can_sleep = 1;
> + mpp_chip->gpio_chip.dev = &pdev->dev;
> + mpp_chip->gpio_chip.base = pdata->mpp_base;
> + mpp_chip->irq_base = platform_get_irq(pdev, 0);
> + mpp_chip->mpp_base = pdata->mpp_base;
> + mpp_chip->base_addr = pdata->core_data.base_addr;
> + mpp_chip->nmpps = pdata->core_data.nmpps;
> +
> + mutex_unlock(&pm8xxx_mpp_chips_lock);
> + list_add(&mpp_chip->link, &pm8xxx_mpp_chips);
> + mutex_lock(&pm8xxx_mpp_chips_lock);
> +
> + platform_set_drvdata(pdev, mpp_chip);
> +
> + rc = gpiochip_add(&mpp_chip->gpio_chip);
> + if (rc) {
> + pr_err("gpiochip_add failed, rc=%d\n", rc);
> + goto reset_drvdata;
> + }
> +
> + rc = pm8xxx_mpp_reg_init(mpp_chip);
> + if (rc) {
> + pr_err("failed to read MPP ctrl registers, rc=%d\n", rc);
> + goto remove_chip;
> + }
> +
> + return 0;
> +
> +remove_chip:
> + if (gpiochip_remove(&mpp_chip->gpio_chip))
> + pr_err("failed to remove gpio chip\n");
> +reset_drvdata:
> + platform_set_drvdata(pdev, NULL);
> + mutex_destroy(&mpp_chip->pm_lock);
> +free_mpp_chip:
> + kfree(mpp_chip);
> + return rc;
> +}
> +
> +static int __devexit pm8xxx_mpp_remove(struct platform_device *pdev)
> +{
> + struct pm8xxx_mpp_chip *mpp_chip = platform_get_drvdata(pdev);
> +
> + mutex_lock(&pm8xxx_mpp_chips_lock);
> + list_del(&mpp_chip->link);
> + mutex_unlock(&pm8xxx_mpp_chips_lock);
> + platform_set_drvdata(pdev, NULL);
> + if (gpiochip_remove(&mpp_chip->gpio_chip))
> + pr_err("failed to remove gpio chip\n");
> + kfree(mpp_chip->ctrl_reg);
> + kfree(mpp_chip);
> +
> + return 0;
> +}
> +
> +static struct platform_driver pm8xxx_mpp_driver = {
> + .probe = pm8xxx_mpp_probe,
> + .remove = __devexit_p(pm8xxx_mpp_remove),
> + .driver = {
> + .name = PM8XXX_MPP_DEV_NAME,
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init pm8xxx_mpp_init(void)
> +{
> + return platform_driver_register(&pm8xxx_mpp_driver);
> +}
> +subsys_initcall(pm8xxx_mpp_init);
> +
> +static void __exit pm8xxx_mpp_exit(void)
> +{
> + platform_driver_unregister(&pm8xxx_mpp_driver);
> +}
> +module_exit(pm8xxx_mpp_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("PM8XXX MPP driver");
> +MODULE_VERSION("1.0");
> +MODULE_ALIAS("platform:" PM8XXX_MPP_DEV_NAME);
> diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
> index 3932bee..d0a991c 100644
> --- a/drivers/mfd/pm8921-core.c
> +++ b/drivers/mfd/pm8921-core.c
> @@ -25,6 +25,8 @@
> #define REG_HWREV 0x002 /* PMIC4 revision */
> #define REG_HWREV_2 0x0E8 /* PMIC4 revision 2 */
>
> +#define REG_MPP_BASE 0x050
> +
> struct pm8921 {
> struct device *dev;
> struct pm_irq_chip *irq_chip;
> @@ -96,6 +98,22 @@ static struct mfd_cell gpio_cell __devinitdata = {
> .num_resources = ARRAY_SIZE(gpio_cell_resources),
> };
>
> +static const struct resource mpp_cell_resources[] __devinitconst = {
> + {
> + .start = PM8921_IRQ_BLOCK_BIT(PM8921_MPP_BLOCK_START, 0),
> + .end = PM8921_IRQ_BLOCK_BIT(PM8921_MPP_BLOCK_START, 0)
> + + PM8921_NR_MPPS - 1,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct mfd_cell mpp_cell __devinitdata = {
> + .name = PM8XXX_MPP_DEV_NAME,
> + .id = -1,
> + .resources = mpp_cell_resources,
> + .num_resources = ARRAY_SIZE(mpp_cell_resources),
> +};
> +
> static int __devinit pm8921_add_subdevices(const struct pm8921_platform_data
> *pdata,
> struct pm8921 *pmic,
> @@ -131,6 +149,19 @@ static int __devinit pm8921_add_subdevices(const struct pm8921_platform_data
> }
> }
>
> + if (pdata->mpp_pdata) {
> + pdata->mpp_pdata->core_data.nmpps = PM8921_NR_MPPS;
> + pdata->mpp_pdata->core_data.base_addr = REG_MPP_BASE;
> + mpp_cell.platform_data = pdata->mpp_pdata;
> + mpp_cell.data_size = sizeof(struct pm8xxx_mpp_platform_data);
> + ret = mfd_add_devices(pmic->dev, 0, &mpp_cell, 1, NULL,
> + irq_base);
> + if (ret) {
> + pr_err("Failed to add mpp subdevice ret=%d\n", ret);
> + goto bail;
> + }
> + }
> +
> return 0;
> bail:
> if (pmic->irq_chip) {
> diff --git a/include/linux/mfd/pm8xxx/mpp.h b/include/linux/mfd/pm8xxx/mpp.h
> new file mode 100644
> index 0000000..c779760
> --- /dev/null
> +++ b/include/linux/mfd/pm8xxx/mpp.h
> @@ -0,0 +1,233 @@
> +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __PM8XXX_MPP_H
> +#define __PM8XXX_MPP_H
> +
> +#include <linux/errno.h>
> +
> +#define PM8XXX_MPP_DEV_NAME "pm8xxx-mpp"
> +
> +struct pm8xxx_mpp_core_data {
> + int base_addr;
> + int nmpps;
> +};
> +
> +struct pm8xxx_mpp_platform_data {
> + struct pm8xxx_mpp_core_data core_data;
> + int mpp_base;
> +};
> +
> +/* API */
> +#if defined(CONFIG_MFD_PM8XXX_MPP) || defined(CONFIG_MFD_PM8XXX_MPP_MODULE)
> +
> +/**
> + * pm8xxx_mpp_config() - configure control options of a multi-purpose pin (MPP)
> + * @mpp: global GPIO number corresponding to the MPP
> + * @type: MPP type which determines the overall MPP function (i.e. digital
> + * in/out/bi, analog in/out, current sink, or test). It should be
> + * set to the value of one of PM8XXX_MPP_TYPE_D_*.
> + * @level: meaning depends upon MPP type specified
> + * @control: meaning depends upon MPP type specified
> + * Context: can sleep
> + *
> + * RETURNS: an appropriate -ERRNO error value on error, or zero for success.
> + *
> + * Usage of level argument:
> + * 1. type = PM8XXX_MPP_TYPE_D_INPUT, PM8XXX_MPP_TYPE_D_OUTPUT,
> + * PM8XXX_MPP_TYPE_D_BI_DIR, or PM8XXX_MPP_TYPE_DTEST_OUTPUT -
> + *
> + * level specifies that digital logic level to use for the MPP. It should
> + * be set to the value of one of PM8XXX_MPP_DIG_LEVEL_*. Actual regulator
> + * connections for these level choices are PMIC chip specific.
> + *
> + * 2. type = PM8XXX_MPP_TYPE_A_INPUT -
> + *
> + * level specifies where in the PMIC chip the analog input value should
> + * be routed to. It should be set to the value of one of
> + * PM8XXX_MPP_AIN_AMUX_*.
> + *
> + * 3. type = PM8XXX_MPP_TYPE_A_OUTPUT -
> + *
> + * level specifies the output analog voltage reference level. It should
> + * be set to the value of one of PM8XXX_MPP_AOUT_LVL_*.
> + *
> + * 4. type = PM8XXX_MPP_TYPE_SINK or PM8XXX_MPP_TYPE_DTEST_SINK -
> + *
> + * level specifies the output current level. It should be set to the value
> + * of one of PM8XXX_MPP_CS_OUT_*.
> + *
> + * Usage of control argument:
> + * 1. type = PM8XXX_MPP_TYPE_D_INPUT -
> + *
> + * control specifies how the digital input should be routed in the chip.
> + * It should be set to the value of one of PM8XXX_MPP_DIN_TO_*.
> + *
> + * 2. type = PM8XXX_MPP_TYPE_D_OUTPUT -
> + *
> + * control specifies the digital output value. It should be set to the
> + * value of one of PM8XXX_MPP_DOUT_CTRL_*.
> + *
> + * 3. type = PM8XXX_MPP_TYPE_D_BI_DIR -
> + *
> + * control specifies the pullup resistor value. It should be set to the
> + * value of one of PM8XXX_MPP_BI_PULLUP_*.
> + *
> + * 4. type = PM8XXX_MPP_TYPE_A_INPUT -
> + *
> + * control is unused; a value of 0 is sufficient.
> + *
> + * 5. type = PM8XXX_MPP_TYPE_A_OUTPUT -
> + *
> + * control specifies if analog output is enabled. It should be set to the
> + * value of one of PM8XXX_MPP_AOUT_CTRL_*.
> + *
> + * 6. type = PM8XXX_MPP_TYPE_SINK -
> + *
> + * control specifies if current sinking is enabled. It should be set to
> + * the value of one of PM8XXX_MPP_CS_CTRL_*.
> + *
> + * 7. type = PM8XXX_MPP_TYPE_DTEST_SINK -
> + *
> + * control specifies if current sinking is enabled. It should be set to
> + * the value of one of PM8XXX_MPP_DTEST_CS_CTRL_*.
> + *
> + * 8. type = PM8XXX_MPP_TYPE_DTEST_OUTPUT -
> + *
> + * control specifies which DTEST bus value to output. It should be set to
> + * the value of one of PM8XXX_MPP_DTEST_*.
> + */
> +int pm8xxx_mpp_config(unsigned mpp, unsigned type, unsigned level,
> + unsigned control);
> +
> +#else
> +
> +static inline int pm8xxx_mpp_config(unsigned mpp, unsigned type, unsigned level,
> + unsigned control)
> +{
> + return -ENXIO;
> +}
> +
> +#endif
> +
> +/* MPP Type: type */
> +#define PM8XXX_MPP_TYPE_D_INPUT 0
> +#define PM8XXX_MPP_TYPE_D_OUTPUT 1
> +#define PM8XXX_MPP_TYPE_D_BI_DIR 2
> +#define PM8XXX_MPP_TYPE_A_INPUT 3
> +#define PM8XXX_MPP_TYPE_A_OUTPUT 4
> +#define PM8XXX_MPP_TYPE_SINK 5
> +#define PM8XXX_MPP_TYPE_DTEST_SINK 6
> +#define PM8XXX_MPP_TYPE_DTEST_OUTPUT 7
> +
> +/* Digital Input/Output: level */
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_0 0
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_1 1
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_2 2
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_3 3
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_4 4
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_5 5
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_6 6
> +#define PM8XXX_MPP_DIG_LEVEL_VIO_7 7
> +
> +/* Digital Input/Output: level [PM8058] */
> +#define PM8058_MPP_DIG_LEVEL_VPH 0
> +#define PM8058_MPP_DIG_LEVEL_S3 1
> +#define PM8058_MPP_DIG_LEVEL_L2 2
> +#define PM8058_MPP_DIG_LEVEL_L3 3
> +
> +/* Digital Input/Output: level [PM8901] */
> +#define PM8901_MPP_DIG_LEVEL_MSMIO 0
> +#define PM8901_MPP_DIG_LEVEL_DIG 1
> +#define PM8901_MPP_DIG_LEVEL_L5 2
> +#define PM8901_MPP_DIG_LEVEL_S4 3
> +#define PM8901_MPP_DIG_LEVEL_VPH 4
> +
> +/* Digital Input/Output: level [PM8921] */
> +#define PM8921_MPP_DIG_LEVEL_S4 1
> +#define PM8921_MPP_DIG_LEVEL_L15 3
> +#define PM8921_MPP_DIG_LEVEL_L17 4
> +#define PM8921_MPP_DIG_LEVEL_VPH 7
> +
> +/* Digital Input: control */
> +#define PM8XXX_MPP_DIN_TO_INT 0
> +#define PM8XXX_MPP_DIN_TO_DBUS1 1
> +#define PM8XXX_MPP_DIN_TO_DBUS2 2
> +#define PM8XXX_MPP_DIN_TO_DBUS3 3
> +
> +/* Digital Output: control */
> +#define PM8XXX_MPP_DOUT_CTRL_LOW 0
> +#define PM8XXX_MPP_DOUT_CTRL_HIGH 1
> +#define PM8XXX_MPP_DOUT_CTRL_MPP 2
> +#define PM8XXX_MPP_DOUT_CTRL_INV_MPP 3
> +
> +/* Bidirectional: control */
> +#define PM8XXX_MPP_BI_PULLUP_1KOHM 0
> +#define PM8XXX_MPP_BI_PULLUP_OPEN 1
> +#define PM8XXX_MPP_BI_PULLUP_10KOHM 2
> +#define PM8XXX_MPP_BI_PULLUP_30KOHM 3
> +
> +/* Analog Input: level */
> +#define PM8XXX_MPP_AIN_AMUX_CH5 0
> +#define PM8XXX_MPP_AIN_AMUX_CH6 1
> +#define PM8XXX_MPP_AIN_AMUX_CH7 2
> +#define PM8XXX_MPP_AIN_AMUX_CH8 3
> +#define PM8XXX_MPP_AIN_AMUX_CH9 4
> +#define PM8XXX_MPP_AIN_AMUX_ABUS1 5
> +#define PM8XXX_MPP_AIN_AMUX_ABUS2 6
> +#define PM8XXX_MPP_AIN_AMUX_ABUS3 7
> +
> +/* Analog Output: level */
> +#define PM8XXX_MPP_AOUT_LVL_1V25 0
> +#define PM8XXX_MPP_AOUT_LVL_1V25_2 1
> +#define PM8XXX_MPP_AOUT_LVL_0V625 2
> +#define PM8XXX_MPP_AOUT_LVL_0V3125 3
> +#define PM8XXX_MPP_AOUT_LVL_MPP 4
> +#define PM8XXX_MPP_AOUT_LVL_ABUS1 5
> +#define PM8XXX_MPP_AOUT_LVL_ABUS2 6
> +#define PM8XXX_MPP_AOUT_LVL_ABUS3 7
> +
> +/* Analog Output: control */
> +#define PM8XXX_MPP_AOUT_CTRL_DISABLE 0
> +#define PM8XXX_MPP_AOUT_CTRL_ENABLE 1
> +#define PM8XXX_MPP_AOUT_CTRL_MPP_HIGH_EN 2
> +#define PM8XXX_MPP_AOUT_CTRL_MPP_LOW_EN 3
> +
> +/* Current Sink: level */
> +#define PM8XXX_MPP_CS_OUT_5MA 0
> +#define PM8XXX_MPP_CS_OUT_10MA 1
> +#define PM8XXX_MPP_CS_OUT_15MA 2
> +#define PM8XXX_MPP_CS_OUT_20MA 3
> +#define PM8XXX_MPP_CS_OUT_25MA 4
> +#define PM8XXX_MPP_CS_OUT_30MA 5
> +#define PM8XXX_MPP_CS_OUT_35MA 6
> +#define PM8XXX_MPP_CS_OUT_40MA 7
> +
> +/* Current Sink: control */
> +#define PM8XXX_MPP_CS_CTRL_DISABLE 0
> +#define PM8XXX_MPP_CS_CTRL_ENABLE 1
> +#define PM8XXX_MPP_CS_CTRL_MPP_HIGH_EN 2
> +#define PM8XXX_MPP_CS_CTRL_MPP_LOW_EN 3
> +
> +/* DTEST Current Sink: control */
> +#define PM8XXX_MPP_DTEST_CS_CTRL_EN1 0
> +#define PM8XXX_MPP_DTEST_CS_CTRL_EN2 1
> +#define PM8XXX_MPP_DTEST_CS_CTRL_EN3 2
> +#define PM8XXX_MPP_DTEST_CS_CTRL_EN4 3
> +
> +/* DTEST Digital Output: control */
> +#define PM8XXX_MPP_DTEST_DBUS1 0
> +#define PM8XXX_MPP_DTEST_DBUS2 1
> +#define PM8XXX_MPP_DTEST_DBUS3 2
> +#define PM8XXX_MPP_DTEST_DBUS4 3
> +
> +#endif
> diff --git a/include/linux/mfd/pm8xxx/pm8921.h b/include/linux/mfd/pm8xxx/pm8921.h
> index def8c31..19cffb2 100644
> --- a/include/linux/mfd/pm8xxx/pm8921.h
> +++ b/include/linux/mfd/pm8xxx/pm8921.h
> @@ -21,22 +21,29 @@
> #include <linux/device.h>
> #include <linux/mfd/pm8xxx/irq.h>
> #include <linux/mfd/pm8xxx/gpio.h>
> +#include <linux/mfd/pm8xxx/mpp.h>
>
> #define PM8921_NR_IRQS 256
>
> #define PM8921_NR_GPIOS 44
>
> +#define PM8921_NR_MPPS 12
> +
> #define PM8921_GPIO_BLOCK_START 24
> +#define PM8921_MPP_BLOCK_START 16
> #define PM8921_IRQ_BLOCK_BIT(block, bit) ((block) * 8 + (bit))
>
> -/* GPIOs [1,N] */
> +/* GPIOs and MPPs [1,N] */
> #define PM8921_GPIO_IRQ(base, gpio) ((base) + \
> PM8921_IRQ_BLOCK_BIT(PM8921_GPIO_BLOCK_START, (gpio)-1))
> +#define PM8921_MPP_IRQ(base, mpp) ((base) + \
> + PM8921_IRQ_BLOCK_BIT(PM8921_MPP_BLOCK_START, (mpp)-1))
>
> struct pm8921_platform_data {
> int irq_base;
> struct pm8xxx_irq_platform_data *irq_pdata;
> struct pm8xxx_gpio_platform_data *gpio_pdata;
> + struct pm8xxx_mpp_platform_data *mpp_pdata;
> };
>
> #endif


--
--
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm
Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2011-03-22 19:49    [W:0.350 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site