lkml.org 
[lkml]   [2011]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] [media] a800: get rid of on-stack dma buffers
Date
usb_control_msg initiates (and waits for completion of) a dma transfer using
the supplied buffer. That buffer thus has to be seperately allocated on
the heap.

In lib/dma_debug.c the function check_for_stack even warns about it:
WARNING: at lib/dma-debug.c:866 check_for_stack

Note: This change is tested to compile only, as I don't have the hardware.

Signed-off-by: Florian Mickler <florian@mickler.org>
---
drivers/media/dvb/dvb-usb/a800.c | 17 +++++++++++++----
1 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index 53b93a4..fe2366b 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -78,17 +78,26 @@ static struct rc_map_table rc_map_a800_table[] = {

static int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
- u8 key[5];
+ int ret;
+ u8 *key = kmalloc(5, GFP_KERNEL);
+ if (!key)
+ return -ENOMEM;
+
if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0),
0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5,
- 2000) != 5)
- return -ENODEV;
+ 2000) != 5) {
+ ret = -ENODEV;
+ goto out;
+ }

/* call the universal NEC remote processor, to find out the key's state and event */
dvb_usb_nec_rc_key_to_event(d,key,event,state);
if (key[0] != 0)
deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]);
- return 0;
+ ret = 0;
+out:
+ kfree(key);
+ return ret;
}

/* USB Driver stuff */
--
1.7.4.1


\
 
 \ /
  Last update: 2011-03-21 19:37    [W:0.613 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site