lkml.org 
[lkml]   [2011]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] mm/dmapool.c: Do not create/destroy sysfs file while holding pools_lock
On Tue, Mar 01, 2011 at 05:01:17PM -0800, Andrew Morton wrote:
> On Mon, 28 Feb 2011 16:41:24 -0600
> Russ Meyerriecks <rmeyerriecks@digium.com> wrote:
>
> > From: Shaun Ruffell <sruffell@digium.com>
> >
> > Eliminates a circular lock dependency reported by lockdep. When reading the
> > "pools" file from a PCI device via sysfs, the s_active lock is acquired before
> > the pools_lock. When unloading the driver and destroying the pool, pools_lock
> > is acquired before the s_active lock.
> >
> > cat/12016 is trying to acquire lock:
> > (pools_lock){+.+.+.}, at: [<c04ef113>] show_pools+0x43/0x140
> >
> > but task is already holding lock:
> > (s_active#82){++++.+}, at: [<c0554e1b>] sysfs_read_file+0xab/0x160
> >
> > which lock already depends on the new lock.
>
> sysfs_dirent_init_lockdep() and the 6992f53349 ("sysfs: Use one lockdep
> class per sysfs attribute") which added it are rather scary.
>
> The alleged bug appears to be due to taking pools_lock outside
> device_create_file() (which takes magical sysfs PseudoVirtualLocks)
> versus show_pools(), which takes pools_lock but is called from inside
> magical sysfs PseudoVirtualLocks.
>
> I don't know if this is actually a real bug or not. Probably not, as
> this device_create_file() does not match the reasons for 6992f53349:
> "There is a sysfs idiom where writing to one sysfs file causes the
> addition or removal of other sysfs files". But that's a guess.
>
> > --- a/mm/dmapool.c
> > +++ b/mm/dmapool.c
> > @@ -174,21 +174,28 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev,
> > init_waitqueue_head(&retval->waitq);
> >
> > if (dev) {
> > - int ret;
> > + int first_pool;
> >
> > mutex_lock(&pools_lock);
> > if (list_empty(&dev->dma_pools))
> > - ret = device_create_file(dev, &dev_attr_pools);
> > + first_pool = 1;
> > else
> > - ret = 0;
> > + first_pool = 0;
> > /* note: not currently insisting "name" be unique */
> > - if (!ret)
> > - list_add(&retval->pools, &dev->dma_pools);
> > - else {
> > - kfree(retval);
> > - retval = NULL;
> > - }
> > + list_add(&retval->pools, &dev->dma_pools);
> > mutex_unlock(&pools_lock);
> > +
> > + if (first_pool) {
> > + int ret;
> > + ret = device_create_file(dev, &dev_attr_pools);
> > + if (ret) {
> > + mutex_lock(&pools_lock);
> > + list_del(&retval->pools);
> > + mutex_unlock(&pools_lock);
> > + kfree(retval);
> > + retval = NULL;
> > + }
> > + }
>
> Not a good fix, IMO. The problem is that if two CPUs concurrently call
> dma_pool_create(), the first CPU will spend time creating the sysfs
> file. Meanwhile, the second CPU will whizz straight back to its
> caller. The caller now thinks that the sysfs file has been created and
> returns to userspace, which immediately tries to read the sysfs file.
> But the first CPU hasn't finished creating it yet. Userspace fails.
>
> One way of fixing this would be to create another singleton lock:
>
>
> {
> static DEFINE_MUTEX(pools_sysfs_lock);
> static bool pools_sysfs_done;
>
> mutex_lock(&pools_sysfs_lock);
> if (pools_sysfs_done == false) {
> create_sysfs_stuff();
> pools_sysfs_done = true;
> }
> mutex_unlock(&pools_sysfs_lock);
> }
>

If I am following, I do not believe using a static pools_sysfs_done flag
will not work since there is one pools file created in sysfs for each
device that creates one or more dma pools. A static flag like that will
fail for any aditional devices.

Assuming that lockdep has uncovered a real bug (I'm not 100% clear on
all the reasons that sysfs PseudoVirtualLocks are needed as opposed
to regular locks) what do you think about something like:

mm/dmapool.c: Do not create/destroy sysfs file while holding pools_lock

Eliminates a circular lock dependency reported by lockdep. When reading the
"pools" file from a PCI device via sysfs, the s_active lock is acquired before
the pools_lock. When unloading the driver and destroying the pool, pools_lock
is acquired before the s_active lock.

cat/12016 is trying to acquire lock:
(pools_lock){+.+.+.}, at: [<c04ef113>] show_pools+0x43/0x140

but task is already holding lock:
(s_active#82){++++.+}, at: [<c0554e1b>] sysfs_read_file+0xab/0x160

which lock already depends on the new lock.

This introduces a new pools_sysfs_lock that is used to synchronize
'pools' attribute creation / destruction without requiring 'pools_lock'
to be held.

Signed-off-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Russ Meyerriecks <rmeyerriecks@digium.com>
---
mm/dmapool.c | 37 +++++++++++++++++++++++++++----------
1 files changed, 27 insertions(+), 10 deletions(-)

diff --git a/mm/dmapool.c b/mm/dmapool.c
index 03bf3bb..b0dd40c 100644
--- a/mm/dmapool.c
+++ b/mm/dmapool.c
@@ -64,6 +64,7 @@ struct dma_page { /* cacheable header for 'allocation' bytes */
#define POOL_TIMEOUT_JIFFIES ((100 /* msec */ * HZ) / 1000)

static DEFINE_MUTEX(pools_lock);
+static DEFINE_MUTEX(pools_sysfs_lock);

static ssize_t
show_pools(struct device *dev, struct device_attribute *attr, char *buf)
@@ -174,21 +175,28 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev,
init_waitqueue_head(&retval->waitq);

if (dev) {
- int ret;
+ int first_pool;

+ mutex_lock(&pools_sysfs_lock);
mutex_lock(&pools_lock);
if (list_empty(&dev->dma_pools))
- ret = device_create_file(dev, &dev_attr_pools);
+ first_pool = 1;
else
- ret = 0;
+ first_pool = 0;
/* note: not currently insisting "name" be unique */
- if (!ret)
- list_add(&retval->pools, &dev->dma_pools);
- else {
- kfree(retval);
- retval = NULL;
- }
+ list_add(&retval->pools, &dev->dma_pools);
mutex_unlock(&pools_lock);
+
+ if (first_pool) {
+ if (device_create_file(dev, &dev_attr_pools)) {
+ mutex_lock(&pools_lock);
+ list_del(&retval->pools);
+ mutex_unlock(&pools_lock);
+ kfree(retval);
+ retval = NULL;
+ }
+ }
+ mutex_unlock(&pools_sysfs_lock);
} else
INIT_LIST_HEAD(&retval->pools);

@@ -263,12 +271,21 @@ static void pool_free_page(struct dma_pool *pool, struct dma_page *page)
*/
void dma_pool_destroy(struct dma_pool *pool)
{
+ int last_pool;
+
+ mutex_lock(&pools_sysfs_lock);
mutex_lock(&pools_lock);
list_del(&pool->pools);
if (pool->dev && list_empty(&pool->dev->dma_pools))
- device_remove_file(pool->dev, &dev_attr_pools);
+ last_pool = 1;
+ else
+ last_pool = 0;
mutex_unlock(&pools_lock);

+ if (last_pool)
+ device_remove_file(pool->dev, &dev_attr_pools);
+ mutex_unlock(&pools_sysfs_lock);
+
while (!list_empty(&pool->page_list)) {
struct dma_page *page;
page = list_entry(pool->page_list.next,
--
1.7.4


\
 
 \ /
  Last update: 2011-03-02 06:21    [W:0.058 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site