lkml.org 
[lkml]   [2011]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC] mmc: msm_sdcc: Use SPS BAM as DMA engine
Date
On recent MSMs, ADM (Data Mover) HW is not present
which means existing SDCC driver can perform data
transfer in PIO (peripheral IO) mode only.
But PIO mode requires lot of CPU attention which
would mean consuming extra CPU MIPS.

As a replacement on these recent MSMs, there is
a new DMA HW engine named SPS-BAM (as part of
Smart Peripheral System of MSM) is added for
data movement between SDCC core and system memory.

This patch has done changes in existing MSM SDCC
driver for using SPS-BAM as DMA engine.

This patch is just for early review.

This patch is dependent on following 2 patches:
https://patchwork.kernel.org/patch/586271/
http://www.spinics.net/lists/arm-kernel/msg118467.html

Subhash Jadavani (1):
mmc: msm_sdcc: Use SPS BAM as DMA engine

drivers/mmc/host/Kconfig | 10 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/msm_sdcc.c | 929 +++++++++++++++++++++++++++++++++++++--
drivers/mmc/host/msm_sdcc.h | 47 ++
drivers/mmc/host/msm_sdcc_dml.c | 303 +++++++++++++
drivers/mmc/host/msm_sdcc_dml.h | 120 +++++
6 files changed, 1374 insertions(+), 36 deletions(-)
create mode 100644 drivers/mmc/host/msm_sdcc_dml.c
create mode 100644 drivers/mmc/host/msm_sdcc_dml.h

--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


\
 
 \ /
  Last update: 2011-03-18 14:27    [W:0.056 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site