lkml.org 
[lkml]   [2011]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: Push byte swaps out of wm8994 bulk read path
Date
For consistency with the write path push byte swaps of the WM8994 register
data out of the bulk read data path into the per-register APIs. The only
user of the bulk register read is the interrupt code which is updated to
do the swaps itself part of this patch.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm8994-core.c | 10 +++++-----
drivers/mfd/wm8994-irq.c | 6 ++++--
2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 3f5b7cc..e198d40 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -40,10 +40,8 @@ static int wm8994_read(struct wm8994 *wm8994, unsigned short reg,
return ret;

for (i = 0; i < bytes / 2; i++) {
- buf[i] = be16_to_cpu(buf[i]);
-
dev_vdbg(wm8994->dev, "Read %04x from R%d(0x%x)\n",
- buf[i], reg + i, reg + i);
+ be16_to_cpu(buf[i]), reg + i, reg + i);
}

return 0;
@@ -69,7 +67,7 @@ int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
if (ret < 0)
return ret;
else
- return val;
+ return be16_to_cpu(val);
}
EXPORT_SYMBOL_GPL(wm8994_reg_read);

@@ -79,7 +77,7 @@ EXPORT_SYMBOL_GPL(wm8994_reg_read);
* @wm8994: Device to read from
* @reg: First register
* @count: Number of registers
- * @buf: Buffer to fill.
+ * @buf: Buffer to fill. The data will be returned big endian.
*/
int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
int count, u16 *buf)
@@ -180,6 +178,8 @@ int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
if (ret < 0)
goto out;

+ r = be16_to_cpu(r);
+
r &= ~mask;
r |= val;

diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index f5e439a..1e3bf4a 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -225,9 +225,11 @@ static irqreturn_t wm8994_irq_thread(int irq, void *data)
return IRQ_NONE;
}

- /* Apply masking */
- for (i = 0; i < WM8994_NUM_IRQ_REGS; i++)
+ /* Bit swap and apply masking */
+ for (i = 0; i < WM8994_NUM_IRQ_REGS; i++) {
+ status[i] = be16_to_cpu(status[i]);
status[i] &= ~wm8994->irq_masks_cur[i];
+ }

/* Report */
for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
--
1.7.4.1


\
 
 \ /
  Last update: 2011-03-18 13:53    [W:0.068 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site