lkml.org 
[lkml]   [2011]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[ANNOUNCE] usbmon capture and parser script
While trying to debug some issues on a driver on Linux, and using a Beagleboard card as a
hardware USB sniffer[1], I noticed the need of having a parser to work with
the sniffer data. While wireshark provides a good way of looking into the info,
most of the times, I just want to convert the data into something more concise
that allows me to work on a char terminal, and that allows to use a device-specific
parser that translates an obscure log into device-specific register reads and writes.

[1] using the code available at: http://beagleboard-usbsniffer.blogspot.com/

So, I wrote a parser, in perl, called parse_tcpdump_log.pl. The current version
is, in fact, more than a parser, as it allows both parsing a previously captured
log, or to start a capture and parse data in real time. The script is available
at the v4l-utils tree, on:
http://git.linuxtv.org/v4l-utils.git?a=blob;f=contrib/parse_tcpdump_log.pl;h=f90e981125462a58cadefa607cbff0ecb4b5ed45;hb=HEAD

At the output, each line is a URB data control transfer. The script groups the
request and the complete URB's into one line, so, each line of the dump
will correspond to a call to usb_control_msg().

The output is:

000000000 ms 000000 ms (000127 us EP=80) 80 06 00 01 00 00 28 00 >>> 12 01 00 02 00 00 00 40 40 20 13 65 10 01 00 01 02 01
000000000 ms 000000 ms (000002 us EP=80) 80 06 00 01 00 00 28 00 >>> 12 01 00 02 09 00 00 40 6b 1d 02 00 06 02 03 02 01 01
000000006 ms 000005 ms (000239 us EP=80) c0 00 00 00 45 00 03 00 <<< 00 00 10
000001006 ms 001000 ms (000112 us EP=80) c0 00 00 00 45 00 03 00 <<< 00 00 10
000001106 ms 000100 ms (000150 us EP=80) c0 00 00 00 45 00 03 00 <<< 00 00 10

The provided info on each of the above lines are:

- Time from the script start;
- Time from the last transaction;
- Time between URB send request and URB response;
- Endpoint for the transfer;
- 8 bytes with the following URB fields:
- Type (1 byte);
- Request (1 byte);
- wValue (2 bytes);
- wIndex (2 bytes);
- wLength (2 bytes);
- URB direction:
>>> - To URB device
<<< - To host
- Optional data (length is given by wLength).

It is also possible to produce a detailed log, when used with "--debug 2", like:

PARSED data:
RAW: ID => 0xffff880105a53f00
RAW: Payload => 00000000000000000000000000000000000200000000000012010002090000406b1d0200060203020101
RAW: Time => 1300309970.745112
RAW: Status => 0
RAW: ArrivalTime => 5584788795812741120.745112
RAW: URBLength => 18
RAW: TransferType => 2
RAW: Device => 1
RAW: Type => C
RAW: DataLength => 18
RAW: BusID => 1
RAW: HasData => present
RAW: Endpoint => 128
RAW: PayloadSize => 42
RAW: SetupRequest => not present

There are a few other parsers at the v4l-utils git tree that can work with the
default output format and produce a device-specific output. For example, the
parser_em28xx.pl will produce a code that will look close to the C clauses
inside the em28xx driver. So, for a real-time debug of the em28xx driver, for
example, it will do:

# ./parse_tcpdump_log.pl --pcap |./parse_em28xx.pl

em28xx_read_reg(dev, EM28XX_R26_COMPR); /* read 0x0c */
em28xx_write_reg(dev, EM28XX_R26_COMPR, 0x0c);
i2c_master_send(0xb8>>1, { 02 00 }, 0x02);
i2c_master_send(0xb8>>1, { 00 00 }, 0x02);
i2c_master_send(0xb8>>1, { 03 }, 0x01);
i2c_master_recv(0xb8>>1, &buf, 0x01); /* 6f */
em28xx_read_reg(dev, 0x05); /* read 0x00 */
i2c_master_send(0xb8>>1, { 03 6f }, 0x02);
em28xx_write_ac97(dev, AC97_MASTER_VOL, 0x8000);
em28xx_write_ac97(dev, AC97_LINE_LEVEL_VOL, 0x8000);
em28xx_write_ac97(dev, AC97_MASTER_MONO_VOL, 0x8000);
em28xx_write_ac97(dev, AC97_LFE_MASTER_VOL, 0x8000);

I wrote a short summary on how to use it at:
http://linuxtv.org/wiki/index.php/Bus_snooping/sniffing#Snooping_Procedures:

The script also accepts the "--man" and "--help" parameters to produce a manpage
or a help.

In summary, I hope that this script will ease USB device driver debug and development.

Feedback, fixes, etc are welcome.

Have fun,
Mauro.


\
 
 \ /
  Last update: 2011-03-16 19:37    [W:0.057 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site