lkml.org 
[lkml]   [2011]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5]: s3fb: enable DTPC
Date
Enable Data Transfer Position Control (DTPC). This is needed at least on
Virge/DX to correctly display at higher pixclocks.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- linux-2.6.38-rc4-/drivers/video/s3fb.c 2011-02-28 17:28:27.000000000 +0100
+++ linux-2.6.38-rc4/drivers/video/s3fb.c 2011-02-28 18:53:00.000000000 +0100
@@ -126,6 +126,8 @@
static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x31, 4, 5}, {0x51, 0, 1}, VGA_REGSET_END};
static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */

+static const struct vga_regset s3_dtpc_regs[] = {{0x3B, 0, 7}, {0x5D, 6, 6}, VGA_REGSET_END};
+
static const struct svga_timing_regs s3_timing_regs = {
s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs,
s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs,
@@ -485,6 +487,7 @@
struct s3fb_info *par = info->par;
u32 value, mode, hmul, offset_value, screen_size, multiplex, dbytes;
u32 bpp = info->var.bits_per_pixel;
+ u32 htotal, hsstart;

if (bpp != 0) {
info->fix.ypanstep = 1;
@@ -604,7 +607,9 @@
if (par->chip == CHIP_360_TRIO3D_1X ||
par->chip == CHIP_362_TRIO3D_2X ||
par->chip == CHIP_368_TRIO3D_2X ||
- par->chip == CHIP_365_TRIO3D) {
+ par->chip == CHIP_365_TRIO3D ||
+ par->chip == CHIP_375_VIRGE_DX ||
+ par->chip == CHIP_385_VIRGE_GX) {
dbytes = info->var.xres * ((bpp+7)/8);
vga_wcrt(par->state.vgabase, 0x91, (dbytes + 7) / 8);
vga_wcrt(par->state.vgabase, 0x90, (((dbytes + 7) / 8) >> 8) | 0x80);
@@ -612,6 +617,16 @@
vga_wcrt(par->state.vgabase, 0x66, 0x81);
}

+ if (par->chip == CHIP_356_VIRGE_GX2 ||
+ par->chip == CHIP_357_VIRGE_GX2P ||
+ par->chip == CHIP_359_VIRGE_GX2P ||
+ par->chip == CHIP_360_TRIO3D_1X ||
+ par->chip == CHIP_362_TRIO3D_2X ||
+ par->chip == CHIP_368_TRIO3D_2X)
+ vga_wcrt(par->state.vgabase, 0x34, 0x00);
+ else /* enable Data Transfer Position Control (DTPC) */
+ vga_wcrt(par->state.vgabase, 0x34, 0x10);
+
svga_wcrt_mask(par->state.vgabase, 0x31, 0x00, 0x40);
multiplex = 0;
hmul = 1;
@@ -745,9 +760,14 @@
hmul, info->node);

/* Set interlaced mode start/end register */
- value = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len;
- value = ((value * hmul) / 8) - 5;
- vga_wcrt(par->state.vgabase, 0x3C, (value + 1) / 2);
+ htotal = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len;
+ htotal = ((htotal * hmul) / 8) - 5;
+ vga_wcrt(par->state.vgabase, 0x3C, (htotal + 1) / 2);
+
+ /* Set Data Transfer Position */
+ hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
+ value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1);
+ svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);

memset_io(info->screen_base, 0x00, screen_size);
/* Device and screen back on */
--
Ondrej Zary


\
 
 \ /
  Last update: 2011-03-01 20:21    [W:0.071 / U:4.548 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site