lkml.org 
[lkml]   [2011]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/5] s3fb: fix 15/16bpp modes with over 115MHz pixclocks on 86C365 Trio3D
Date
Enable pixel multiplexing in 15/16bpp modes when pixclock is over 115MHz
on Trio3D (86C365) cards to fix artifacts on the left side of screen.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- linux-2.6.38-rc4-/drivers/video/s3fb.c 2011-02-20 20:48:41.000000000 +0100
+++ linux-2.6.38-rc4/drivers/video/s3fb.c 2011-02-22 23:31:16.000000000 +0100
@@ -675,6 +675,15 @@
svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
else
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
+ } else if (par->chip == CHIP_365_TRIO3D) {
+ svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
+ if (info->var.pixclock > 8695) {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
+ hmul = 2;
+ } else {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x20, 0xF0);
+ multiplex = 1;
+ }
} else {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x30, 0xF0);
@@ -691,6 +700,15 @@
svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
else
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
+ } else if (par->chip == CHIP_365_TRIO3D) {
+ svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
+ if (info->var.pixclock > 8695) {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
+ hmul = 2;
+ } else {
+ svga_wcrt_mask(par->state.vgabase, 0x67, 0x40, 0xF0);
+ multiplex = 1;
+ }
} else {
svga_wcrt_mask(par->state.vgabase, 0x50, 0x10, 0x30);
svga_wcrt_mask(par->state.vgabase, 0x67, 0x50, 0xF0);
--
Ondrej Zary


\
 
 \ /
  Last update: 2011-03-01 20:21    [W:0.057 / U:10.868 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site