lkml.org 
[lkml]   [2011]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/10] Add yaffs2 file system: hok in to Linux tree
Date
yaffs2's own Kconfig and Makefile as well as hooking up to
existing fs/Kconfig and fs/Makefile and add entry to MAINTAINERS.

Signed-off-by: Charles Manning <cdhmanning@gmail.com>
---
MAINTAINERS | 7 ++
fs/Kconfig | 1 +
fs/Makefile | 1 +
fs/yaffs2/Kconfig | 161 ++++++++++++++++++++++++++++++++++++++++++++++++++++
fs/yaffs2/Makefile | 17 ++++++
5 files changed, 187 insertions(+), 0 deletions(-)
create mode 100644 fs/yaffs2/Kconfig
create mode 100644 fs/yaffs2/Makefile
diff --git a/MAINTAINERS b/MAINTAINERS
index 531c5cf..3c0c7f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6916,6 +6916,13 @@ L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/uartlite.c

+YAFFS2 FLASH FILE SYSTEM
+M: Charles Manning <cdhmanning@gmail.com>
+W: http://www.yaffs.net/
+L: yaffs@lists.aleph1.co.uk
+S: Maintained
+F: fs/yaffs2
+
YAM DRIVER FOR AX.25
M: Jean-Paul Roubelat <jpr@f6fbb.org>
L: linux-hams@vger.kernel.org
diff --git a/fs/Kconfig b/fs/Kconfig
index 3db9caa..3871e0d 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -175,6 +175,7 @@ source "fs/hfsplus/Kconfig"
source "fs/befs/Kconfig"
source "fs/bfs/Kconfig"
source "fs/efs/Kconfig"
+source "fs/yaffs2/Kconfig"
source "fs/jffs2/Kconfig"
# UBIFS File system configuration
source "fs/ubifs/Kconfig"
diff --git a/fs/Makefile b/fs/Makefile
index a7f7cef..e370ea5 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -121,3 +121,4 @@ obj-$(CONFIG_BTRFS_FS) += btrfs/
obj-$(CONFIG_GFS2_FS) += gfs2/
obj-$(CONFIG_EXOFS_FS) += exofs/
obj-$(CONFIG_CEPH_FS) += ceph/
+obj-$(CONFIG_YAFFS_FS) += yaffs2/
diff --git a/fs/yaffs2/Kconfig b/fs/yaffs2/Kconfig
new file mode 100644
index 0000000..658feea
--- /dev/null
+++ b/fs/yaffs2/Kconfig
@@ -0,0 +1,161 @@
+#
+# yaffs file system configurations
+#
+
+config YAFFS_FS
+ tristate "yaffs2 file system support"
+ default n
+ depends on MTD_BLOCK
+ select YAFFS_YAFFS1
+ select YAFFS_YAFFS2
+ help
+ yaffs2, or Yet Another Flash File System, is a file system
+ optimised for NAND Flash chips.
+
+ To compile the yaffs2 file system support as a module, choose M
+ here: the module will be called yaffs2.
+
+ If unsure, say N.
+
+ Further information on yaffs2 is available at
+ <http://www.aleph1.co.uk/yaffs/>.
+
+config YAFFS_YAFFS1
+ bool "512 byte / page devices"
+ depends on YAFFS_FS
+ default y
+ help
+ Enable yaffs1 support -- yaffs for 512 byte / page devices
+
+ Not needed for 2K-page devices.
+
+ If unsure, say Y.
+
+config YAFFS_9BYTE_TAGS
+ bool "Use older-style on-NAND data format with pageStatus byte"
+ depends on YAFFS_YAFFS1
+ default n
+ help
+
+ Older-style on-NAND data format has a "pageStatus" byte to record
+ chunk/page state. This byte is zero when the page is discarded.
+ Choose this option if you have existing on-NAND data using this
+ format that you need to continue to support. New data written
+ also uses the older-style format. Note: Use of this option
+ generally requires that MTD's oob layout be adjusted to use the
+ older-style format. See notes on tags formats and MTD versions
+ in yaffs_mtdif1.c.
+
+ If unsure, say N.
+
+config YAFFS_DOES_ECC
+ bool "Lets yaffs do its own ECC"
+ depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS
+ default n
+ help
+ This enables yaffs to use its own ECC functions instead of using
+ the ones from the generic MTD-NAND driver.
+
+ If unsure, say N.
+
+config YAFFS_ECC_WRONG_ORDER
+ bool "Use the same ecc byte order as Steven Hill's nand_ecc.c"
+ depends on YAFFS_FS && YAFFS_DOES_ECC && !YAFFS_9BYTE_TAGS
+ default n
+ help
+ This makes yaffs_ecc.c use the same ecc byte order as Steven
+ Hill's nand_ecc.c. If not set, then you get the same ecc byte
+ order as SmartMedia.
+
+ If unsure, say N.
+
+config YAFFS_YAFFS2
+ bool "2048 byte (or larger) / page devices"
+ depends on YAFFS_FS
+ default y
+ help
+ Enable yaffs2 support -- yaffs for >= 2K bytes per page devices
+
+ If unsure, say Y.
+
+config YAFFS_AUTO_YAFFS2
+ bool "Autoselect yaffs2 format"
+ depends on YAFFS_YAFFS2
+ default y
+ help
+ Without this, you need to explicitely use yaffs2 as the file
+ system type. With this, you can say "yaffs" and yaffs or yaffs2
+ will be used depending on the device page size (yaffs on
+ 512-byte page devices, yaffs2 on 2K page devices).
+
+ If unsure, say Y.
+
+config YAFFS_DISABLE_TAGS_ECC
+ bool "Disable yaffs from doing ECC on tags by default"
+ depends on YAFFS_FS && YAFFS_YAFFS2
+ default n
+ help
+ This defaults yaffs to using its own ECC calculations on tags instead of
+ just relying on the MTD.
+ This behavior can also be overridden with tags_ecc_on and
+ tags_ecc_off mount options.
+
+ If unsure, say N.
+
+config YAFFS_ALWAYS_CHECK_CHUNK_ERASED
+ bool "Force chunk erase check"
+ depends on YAFFS_FS
+ default n
+ help
+ Normally yaffs only checks chunks before writing until an erased
+ chunk is found. This helps to detect any partially written
+ chunks that might have happened due to power loss.
+
+ Enabling this forces on the test that chunks are erased in flash
+ before writing to them. This takes more time but is potentially
+ a bit more secure.
+
+ Suggest setting Y during development and ironing out driver
+ issues etc. Suggest setting to N if you want faster writing.
+
+ If unsure, say Y.
+
+config YAFFS_EMPTY_LOST_AND_FOUND
+ bool "Empty lost and found on boot"
+ depends on YAFFS_FS
+ default n
+ help
+ If this is enabled then the contents of lost and found is
+ automatically dumped at mount.
+
+ If unsure, say N.
+
+config YAFFS_DISABLE_BLOCK_REFRESHING
+ bool "Disable yaffs2 block refreshing"
+ depends on YAFFS_FS
+ default n
+ help
+ If this is set, then block refreshing is disabled.
+ Block refreshing infrequently refreshes the oldest block in
+ a yaffs2 file system. This mechanism helps to refresh flash to
+ mitigate against data loss. This is particularly useful for MLC.
+
+ If unsure, say N.
+
+config YAFFS_DISABLE_BACKGROUND
+ bool "Disable yaffs2 background processing"
+ depends on YAFFS_FS
+ default n
+ help
+ If this is set, then background processing is disabled.
+ Background processing makes many foreground activities faster.
+
+ If unsure, say N.
+
+config YAFFS_XATTR
+ bool "Enable yaffs2 xattr support"
+ depends on YAFFS_FS
+ default y
+ help
+ If this is set then yaffs2 will provide xattr support.
+ If unsure, say Y.
diff --git a/fs/yaffs2/Makefile b/fs/yaffs2/Makefile
new file mode 100644
index 0000000..e63a28a
--- /dev/null
+++ b/fs/yaffs2/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the linux YAFFS filesystem routines.
+#
+
+obj-$(CONFIG_YAFFS_FS) += yaffs.o
+
+yaffs-y := yaffs_ecc.o yaffs_vfs.o yaffs_guts.o yaffs_checkptrw.o
+yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o
+yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o
+yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o
+yaffs-y += yaffs_nameval.o yaffs_attribs.o
+yaffs-y += yaffs_allocator.o
+yaffs-y += yaffs_yaffs1.o
+yaffs-y += yaffs_yaffs2.o
+yaffs-y += yaffs_bitmap.o
+yaffs-y += yaffs_verify.o
+
--
1.7.1


\
 
 \ /
  Last update: 2011-02-09 04:31    [from the cache]
©2003-2011 Jasper Spaans