lkml.org 
[lkml]   [2011]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/4] x86: Minimize SRAT messages
Condense the SRAT: messages to show all the APIC id's on one line for
each Node. This not only saves space in the log buf, it also makes
it easier to spot inconsistencies in core to node placement.

On a system with 2368 cores on 248 nodes the change will be...

Was 2368 lines (for 2368 cores):

779 [0] SRAT: PXM 0 -> APIC 0x0000 -> Node 0
780 [0] SRAT: PXM 0 -> APIC 0x0002 -> Node 0
781 [0] SRAT: PXM 0 -> APIC 0x0004 -> Node 0
...
3145 [0] SRAT: PXM 247 -> APIC 0x3df0 -> Node 247
3146 [0] SRAT: PXM 247 -> APIC 0x3df2 -> Node 247

Now it's 248 lines (for 248 Nodes):

821 [0] SRAT: Node 0: PXM:APIC 0:0x0 :0x2 :0x4 :0x10 :0x12 ...
822 [0] SRAT: Node 1: PXM:APIC 1:0x40 :0x42 :0x44 :0x50 :0x52 ...
823 [0] SRAT: Node 2: PXM:APIC 2:0x80 :0x82 :0x84 :0x90 :0x92 ...
...
1067 [0] SRAT: Node 246: PXM:APIC 246:0x3d80 :0x3d82 :0x3d84 :0x3d90 ...
1068 [0] SRAT: Node 247: PXM:APIC 247:0x3dc0 :0x3dc2 :0x3dc4 :0x3dd2 ...

Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Jack Steiner <steiner@sgi.com>
Reviewed-by: Robin Holt <holt@sgi.com>
---
arch/x86/mm/srat_64.c | 19 +++++++++++++++++--
drivers/acpi/numa.c | 7 +++++++
2 files changed, 24 insertions(+), 2 deletions(-)

--- linux.orig/arch/x86/mm/srat_64.c
+++ linux/arch/x86/mm/srat_64.c
@@ -110,6 +110,12 @@ void __init acpi_numa_slit_init(struct a
memblock_x86_reserve_range(phys, phys + length, "ACPI SLIT");
}

+/*
+ * Keep track of previous node and PXM values so we can combine
+ * same ones onto a single line.
+ */
+static int __initdata last_node = NUMA_NO_NODE, last_pxm = PXM_INVAL;
+
/* Callback for Proximity Domain -> x2APIC mapping */
void __init
acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
@@ -141,8 +147,17 @@ acpi_numa_x2apic_affinity_init(struct ac
set_apicid_to_node(apic_id, node);
node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
- printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
- pxm, apic_id, node);
+ if (node != last_node) {
+ pr_info("SRAT: Node %u: PXM:APIC %u:0x%x",
+ node, pxm, apic_id);
+ last_node = node;
+ last_pxm = pxm;
+ } else if (pxm != last_pxm) {
+ pr_cont(" %u:0x%x", pxm, apic_id);
+ last_pxm = pxm;
+ } else {
+ pr_cont(" :0x%x", apic_id);
+ }
}

/* Callback for Proximity Domain -> LAPIC mapping */
--- linux.orig/drivers/acpi/numa.c
+++ linux/drivers/acpi/numa.c
@@ -286,6 +286,13 @@ int __init acpi_numa_init(void)
if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
acpi_parse_x2apic_affinity, 0);
+ /*
+ * Parsing ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY entries place
+ * multiple CPU's on the same Node line. This can leave the
+ * last entry "dangling" without a newline. Insert it here.
+ */
+ pr_cont("\n");
+
acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
acpi_parse_processor_affinity, 0);
ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
--


\
 
 \ /
  Last update: 2011-02-25 19:09    [W:2.938 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site