lkml.org 
[lkml]   [2011]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6] i2c-gpio: add devicetree support
On Thu, Feb 24, 2011 at 12:00:13PM +0800, Thomas Chou wrote:
> From: Albert Herranz <albert_herranz@yahoo.es>
>
> This patch adds devicetree support to i2c-gpio driver. The allocation
> of local data is integrated to a private structure, and use devm_*
> helper for easy cleanup.
>
> It is base on an earlier patch for gc-linux from
> Albert Herranz <albert_herranz@yahoo.es>.
>
> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
> CC: Albert Herranz <albert_herranz@yahoo.es>
> Acked-by: Haavard Skinnemoen <hskinnemoen@gmail.com>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> ---
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
> new file mode 100644
> index 0000000..38ef4f2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt
> @@ -0,0 +1,40 @@
> +GPIO-based I2C
> +
> +Required properties:
> +- compatible : should be "i2c-gpio".
> +- gpios : should specify GPIOs used for SDA and SCL lines, in that order.
> +Optional properties:
> +- sda-is-open-drain : present if SDA gpio is open-drain.
> +- scl-is-open-drain : present if SCL gpio is open-drain.
> +- scl-is-output-only : present if the output driver for SCL cannot be
> + turned off. this will prevent clock stretching from working.
> +- speed-hz : SCL frequency.

Hi Thomas,

One nitpick; I just looked, and other i2c controllers are already
using 'clock-frequency' instead of 'speed-hz' for the speed of the
bus. I'd like to see this patch use the same terminology.

Otherwise this looks good to me.

Thanks,
g.


\
 
 \ /
  Last update: 2011-02-24 17:25    [from the cache]
©2003-2011 Jasper Spaans