lkml.org 
[lkml]   [2011]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/10] RTC: Fix the cross interrupt issue on rtc-test.
Date
From: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>

The rtc-test driver is meant to provide a test/debug code for the RTC
subsystem.

The rtc-test driver simulates specific interrupts by echoing to the
sys interface. Those were the update, alarm and periodic interrupts.

As a side effect of the new implementation, any interrupt generated in
the rtc-test driver would trigger the same code path in the generic
code, and thus the distinction among interrupts gets lost.

This patch preserves the previous behaviour of the rtc-test driver,
where e.g. an update interrupt would not trigger an alarm or periodic
interrupt, and vice-versa. In real world RTC drivers, this is not an
issue, but in the rtc-test driver it may be interesting to distinguish
these interrupts for testing purposes.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: rtc-linux@googlegroups.com
Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
drivers/rtc/rtc-test.c | 13 +++++++++----
1 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index 61ad5ab..34d5631 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -71,11 +71,16 @@ static ssize_t test_irq_store(struct device *dev,
struct rtc_device *rtc = platform_get_drvdata(plat_dev);

retval = count;
- if (strncmp(buf, "tick", 4) == 0)
+ if (strncmp(buf, "tick", 4) == 0 && rtc->pie_enabled)
rtc_update_irq(rtc, 1, RTC_PF | RTC_IRQF);
- else if (strncmp(buf, "alarm", 5) == 0)
- rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
- else if (strncmp(buf, "update", 6) == 0)
+ else if (strncmp(buf, "alarm", 5) == 0) {
+ struct rtc_wkalrm alrm;
+ int err = rtc_read_alarm(rtc, &alrm);
+
+ if (!err && alrm.enabled)
+ rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF);
+
+ } else if (strncmp(buf, "update", 6) == 0 && rtc->uie_rtctimer.enabled)
rtc_update_irq(rtc, 1, RTC_UF | RTC_IRQF);
else
retval = -EINVAL;
--
1.7.3.2.146.gca209


\
 
 \ /
  Last update: 2011-02-22 00:59    [W:0.122 / U:1.684 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site