lkml.org 
[lkml]   [2011]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH OF 13/14] rtc/cmos: add OF bindings
    On Mon, Jan 24, 2011 at 09:59:01AM +0530, Sebastian Andrzej Siewior wrote:
    > This allows to load the OF driver based informations from the device
    > tree. Systems without BIOS may need to perform some initialization.
    > PowerPC creates a PNP device from the OF information and performs this
    > kind of initialization in their private PCI quirk. This looks more
    > generic.
    >
    > Cc: rtc-linux@googlegroups.com
    > Cc: Alessandro Zummo <a.zummo@towertech.it>
    > Cc: devicetree-discuss@lists.ozlabs.org
    > Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    > Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
    > ---
    > Documentation/powerpc/dts-bindings/rtc-cmos.txt | 28 ++++++++++++++
    > drivers/rtc/rtc-cmos.c | 46 +++++++++++++++++++++++
    > 2 files changed, 74 insertions(+), 0 deletions(-)
    > create mode 100644 Documentation/powerpc/dts-bindings/rtc-cmos.txt
    >
    > diff --git a/Documentation/powerpc/dts-bindings/rtc-cmos.txt b/Documentation/powerpc/dts-bindings/rtc-cmos.txt
    > new file mode 100644
    > index 0000000..7382989
    > --- /dev/null
    > +++ b/Documentation/powerpc/dts-bindings/rtc-cmos.txt

    Move to Documentation/devicetree/bindings/rtc/

    > @@ -0,0 +1,28 @@
    > + Motorola mc146818 compatible RTC
    > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    > +
    > +Required properties:
    > + - compatible : "motorola,mc146818"
    > + - reg : should contain registers location and length.
    > +
    > +Optional properties:
    > + - interrupts : should contain interrupt.
    > + - interrupt-parent : interrupt source phandle.
    > + - ctrl-reg : Contains the initial value of the control register also
    > + called "Register B".
    > + - freq-reg : Contains the initial value of the frequency register also
    > + called "Regsiter A".
    > +
    > +"Register A" and "B" are usually initialized by the firmware (BIOS for
    > +instance). If this is not done, it can be performed by the driver.
    > +
    > +ISA Example:
    > +
    > + rtc@70 {
    > + compatible = "motorola,mc146818";
    > + interrupts = <8 3>;
    > + interrupt-parent = <&ioapic1>;
    > + ctrl-reg = <2>;
    > + freq-reg = <0x26>;
    > + reg = <1 0x70 2>;
    > + };
    > diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
    > index c7ff8df..2709e00 100644
    > --- a/drivers/rtc/rtc-cmos.c
    > +++ b/drivers/rtc/rtc-cmos.c
    > @@ -37,6 +37,8 @@
    > #include <linux/mod_devicetable.h>
    > #include <linux/log2.h>
    > #include <linux/pm.h>
    > +#include <linux/of.h>
    > +#include <linux/of_platform.h>
    >
    > /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
    > #include <asm-generic/rtc.h>
    > @@ -1123,6 +1125,46 @@ static struct pnp_driver cmos_pnp_driver = {
    >
    > #endif /* CONFIG_PNP */
    >
    > +#ifdef CONFIG_OF
    > +static const struct of_device_id of_cmos_match[] = {
    > + {
    > + .compatible = "motorola,mc146818",
    > + },
    > + { },
    > +};
    > +MODULE_DEVICE_TABLE(of, of_cmos_match);
    > +
    > +static __init void cmos_of_init(struct platform_device *pdev)
    > +{
    > + struct device_node *node = pdev->dev.of_node;
    > + struct rtc_time time;
    > + int ret;
    > + const __be32 *val;
    > +
    > + if (!node)
    > + return;
    > +
    > + val = of_get_property(node, "ctrl-reg", NULL);
    > + if (val)
    > + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL);
    > +
    > + val = of_get_property(node, "freq-reg", NULL);
    > + if (val)
    > + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT);
    > +
    > + get_rtc_time(&time);
    > + ret = rtc_valid_tm(&time);
    > + if (ret) {
    > + struct rtc_time def_time = {
    > + .tm_year = 1,
    > + .tm_mday = 1,
    > + };
    > + set_rtc_time(&def_time);
    > + }
    > +}
    > +#else
    > +static inline void cmos_of_init(struct platform_device *pdev) {}
    > +#endif
    > /*----------------------------------------------------------------*/
    >
    > /* Platform setup should have set up an RTC device, when PNP is
    > @@ -1131,6 +1173,7 @@ static struct pnp_driver cmos_pnp_driver = {
    >
    > static int __init cmos_platform_probe(struct platform_device *pdev)
    > {
    > + cmos_of_init(pdev);
    > cmos_wake_setup(&pdev->dev);
    > return cmos_do_probe(&pdev->dev,
    > platform_get_resource(pdev, IORESOURCE_IO, 0),
    > @@ -1162,6 +1205,9 @@ static struct platform_driver cmos_platform_driver = {
    > #ifdef CONFIG_PM
    > .pm = &cmos_pm_ops,
    > #endif
    > +#if defined(CONFIG_OF)
    > + .of_match_table = of_cmos_match,
    > +#endif

    The #if defined(CONFIG_OF) is no longer necessary around
    .of_match_table, particularly if you have a #else above that #defines
    of_cmos_match to NULL.

    > }
    > };
    >
    > --
    > 1.7.3.2
    >
    > _______________________________________________
    > devicetree-discuss mailing list
    > devicetree-discuss@lists.ozlabs.org
    > https://lists.ozlabs.org/listinfo/devicetree-discuss


    \
     
     \ /
      Last update: 2011-02-16 23:13    [W:0.061 / U:271.484 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site