lkml.org 
[lkml]   [2011]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[010/272] hwmon: (via686a) Initialize fan_div values
2.6.37-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Jean Delvare <khali@linux-fr.org>

commit f790674d3f87df6390828ac21a7d1530f71b59c8 upstream.

Functions set_fan_min() and set_fan_div() assume that the fan_div
values have already been read from the register. The driver currently
doesn't initialize them at load time, they are only set when function
via686a_update_device() is called. This means that set_fan_min() and
set_fan_div() misbehave if, for example, "sensors -s" is called
before any monitoring application (e.g. "sensors") is has been run.

Fix the problem by always initializing the fan_div values at device
bind time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/hwmon/via686a.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -687,6 +687,13 @@ static int __devexit via686a_remove(stru
return 0;
}

+static void via686a_update_fan_div(struct via686a_data *data)
+{
+ int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+ data->fan_div[0] = (reg >> 4) & 0x03;
+ data->fan_div[1] = reg >> 6;
+}
+
static void __devinit via686a_init_device(struct via686a_data *data)
{
u8 reg;
@@ -700,6 +707,9 @@ static void __devinit via686a_init_devic
via686a_write_value(data, VIA686A_REG_TEMP_MODE,
(reg & ~VIA686A_TEMP_MODE_MASK)
| VIA686A_TEMP_MODE_CONTINUOUS);
+
+ /* Pre-read fan clock divisor values */
+ via686a_update_fan_div(data);
}

static struct via686a_data *via686a_update_device(struct device *dev)
@@ -751,9 +761,7 @@ static struct via686a_data *via686a_upda
(via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
0xc0) >> 6;

- i = via686a_read_value(data, VIA686A_REG_FANDIV);
- data->fan_div[0] = (i >> 4) & 0x03;
- data->fan_div[1] = i >> 6;
+ via686a_update_fan_div(data);
data->alarms =
via686a_read_value(data,
VIA686A_REG_ALARM1) |



\
 
 \ /
  Last update: 2011-02-16 03:21    [W:1.223 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site