lkml.org 
[lkml]   [2011]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[250/272] drm/radeon/kms: Enable new pll calculation for avivo+ asics
2.6.37-stable review patch.  If anyone has any objections, please let us know.

------------------

From: Alex Deucher <alexdeucher@gmail.com>

commit 619efb105924d8cafa0c1dd9389e9ab506f5425d upstream.

New algo is used for r5xx+ and legacy is used for
r1xx-r4xx, rv515.

I've tested on all relevant GPUs and monitors that I
have access to and have found no problems.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26562
https://bugzilla.kernel.org/show_bug.cgi?id=26552
May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=32556

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
drivers/gpu/drm/radeon/atombios_crtc.c | 18 ++++++++++++++++--
drivers/gpu/drm/radeon/radeon_atombios.c | 10 ----------
drivers/gpu/drm/radeon/radeon_display.c | 3 +++
3 files changed, 19 insertions(+), 12 deletions(-)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -531,6 +531,7 @@ static u32 atombios_adjust_pll(struct dr
dp_clock = dig_connector->dp_clock;
}
}
+/* this might work properly with the new pll algo */
#if 0 /* doesn't work properly on some laptops */
/* use recommended ref_div for ss */
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
@@ -548,6 +549,11 @@ static u32 atombios_adjust_pll(struct dr
adjusted_clock = mode->clock * 2;
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
+ /* rv515 needs more testing with this option */
+ if (rdev->family != CHIP_RV515) {
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+ pll->flags |= RADEON_PLL_IS_LCD;
+ }
} else {
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
@@ -915,8 +921,16 @@ static void atombios_crtc_set_pll(struct
/* adjust pixel clock as needed */
adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss);

- radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
- &ref_div, &post_div);
+ /* rv515 seems happier with the old algo */
+ if (rdev->family == CHIP_RV515)
+ radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+ &ref_div, &post_div);
+ else if (ASIC_IS_AVIVO(rdev))
+ radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+ &ref_div, &post_div);
+ else
+ radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+ &ref_div, &post_div);

atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss);

--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1136,16 +1136,6 @@ bool radeon_atom_get_clock_info(struct d
p1pll->pll_out_min = 64800;
else
p1pll->pll_out_min = 20000;
- } else if (p1pll->pll_out_min > 64800) {
- /* Limiting the pll output range is a good thing generally as
- * it limits the number of possible pll combinations for a given
- * frequency presumably to the ones that work best on each card.
- * However, certain duallink DVI monitors seem to like
- * pll combinations that would be limited by this at least on
- * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per
- * family.
- */
- p1pll->pll_out_min = 64800;
}

p1pll->pll_in_min =
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -603,6 +603,9 @@ void radeon_compute_pll_legacy(struct ra
pll_out_max = pll->pll_out_max;
}

+ if (pll_out_min > 64800)
+ pll_out_min = 64800;
+
if (pll->flags & RADEON_PLL_USE_REF_DIV)
min_ref_div = max_ref_div = pll->reference_div;
else {



\
 
 \ /
  Last update: 2011-02-16 01:55    [W:0.539 / U:2.700 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site