lkml.org 
[lkml]   [2011]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 11/13] da850: pruss SUART board specific additions.
Date
This patch adds the pruss SUART pin mux and registers the device
with the pruss mfd driver.

Signed-off-by: Subhasish Ghosh <subhasish@mistralsolutions.com>
---
arch/arm/mach-davinci/board-da850-evm.c | 36 +++++++++++++++++++++++++++++++
1 files changed, 36 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index f9c38f8..3858516 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1060,6 +1060,25 @@ const short da850_evm_pruss_can_pins[] = {
-1
};

+const short da850_evm_pruss_suart_pins[] = {
+ DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+ DA850_AHCLKR, DA850_ACLKR, DA850_AFSR,
+ DA850_AXR_13, DA850_AXR_9, DA850_AXR_7,
+ DA850_AXR_14, DA850_AXR_10, DA850_AXR_8,
+ -1
+};
+
+static int __init da850_evm_setup_pruss_suart(void)
+{
+ int ret;
+
+ ret = davinci_cfg_reg_list(da850_evm_pruss_suart_pins);
+ if (ret)
+ pr_warning("%s: da850_evm_pruss_suart_pins "
+ "mux setup failed: %d\n", __func__, ret);
+ return ret;
+}
+
static int __init da850_evm_setup_pruss_can(void)
{
int ret, val = 0;
@@ -1085,6 +1104,17 @@ static int __init da850_evm_setup_pruss_can(void)
return ret;
}

+static struct da850_evm_pruss_suart_data suart_data = {
+ .version = 1,
+ .resource = {
+ .name = "da8xx_mcasp0_iomem",
+ .start = DAVINCI_DA8XX_MCASP0_REG_BASE,
+ .end = DAVINCI_DA8XX_MCASP0_REG_BASE +
+ (SZ_1K * 12) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct da8xx_pruss_can_data can_data = {
.version = 1,
};
@@ -1094,6 +1124,12 @@ static struct da8xx_pruss_devices pruss_devices[] = {
.dev_name = "da8xx_pruss_can",
.pdata = &can_data,
.pdata_size = sizeof(can_data),
+ .setup = da850_evm_setup_pruss_suart,
+ },
+ {
+ .dev_name = "da8xx_pruss_uart",
+ .pdata = &suart_data,
+ .pdata_size = sizeof(suart_data),
.setup = da850_evm_setup_pruss_can,
},
{
--
1.7.2.3


\
 
 \ /
  Last update: 2011-02-11 15:43    [W:0.122 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site