lkml.org 
[lkml]   [2011]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH V10 13/15] ptp: Added a clock that uses the eTSEC found on the MPC85xx.
    From
    Date
    On Thu, 2011-01-27 at 11:59 +0100, Richard Cochran wrote:
    > The eTSEC includes a PTP clock with quite a few features. This patch adds
    > support for the basic clock adjustment functions, plus two external time
    > stamps, one alarm, and the PPS callback.
    >
    > Signed-off-by: Richard Cochran <richard.cochran@omicron.at>

    This looks ok to me.

    Acked-by: John Stultz <johnstul@us.ibm.com>

    > ---
    > Documentation/powerpc/dts-bindings/fsl/tsec.txt | 57 +++
    > arch/powerpc/boot/dts/mpc8313erdb.dts | 14 +
    > arch/powerpc/boot/dts/mpc8572ds.dts | 14 +
    > arch/powerpc/boot/dts/p2020ds.dts | 14 +
    > arch/powerpc/boot/dts/p2020rdb.dts | 14 +
    > drivers/net/Makefile | 1 +
    > drivers/net/gianfar_ptp.c | 448 +++++++++++++++++++++++
    > drivers/net/gianfar_ptp_reg.h | 113 ++++++
    > drivers/ptp/Kconfig | 13 +
    > 9 files changed, 688 insertions(+), 0 deletions(-)
    > create mode 100644 drivers/net/gianfar_ptp.c
    > create mode 100644 drivers/net/gianfar_ptp_reg.h
    >
    > diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
    > index edb7ae1..f6edbb8 100644
    > --- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
    > +++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
    > @@ -74,3 +74,60 @@ Example:
    > interrupt-parent = <&mpic>;
    > phy-handle = <&phy0>
    > };
    > +
    > +* Gianfar PTP clock nodes
    > +
    > +General Properties:
    > +
    > + - compatible Should be "fsl,etsec-ptp"
    > + - reg Offset and length of the register set for the device
    > + - interrupts There should be at least two interrupts. Some devices
    > + have as many as four PTP related interrupts.
    > +
    > +Clock Properties:
    > +
    > + - tclk-period Timer reference clock period in nanoseconds.
    > + - tmr-prsc Prescaler, divides the output clock.
    > + - tmr-add Frequency compensation value.
    > + - cksel 0= external clock, 1= eTSEC system clock, 3= RTC clock input.
    > + Currently the driver only supports choice "1".
    > + - tmr-fiper1 Fixed interval period pulse generator.
    > + - tmr-fiper2 Fixed interval period pulse generator.
    > + - max-adj Maximum frequency adjustment in parts per billion.
    > +
    > + These properties set the operational parameters for the PTP
    > + clock. You must choose these carefully for the clock to work right.
    > + Here is how to figure good values:
    > +
    > + TimerOsc = system clock MHz
    > + tclk_period = desired clock period nanoseconds
    > + NominalFreq = 1000 / tclk_period MHz
    > + FreqDivRatio = TimerOsc / NominalFreq (must be greater that 1.0)
    > + tmr_add = ceil(2^32 / FreqDivRatio)
    > + OutputClock = NominalFreq / tmr_prsc MHz
    > + PulseWidth = 1 / OutputClock microseconds
    > + FiperFreq1 = desired frequency in Hz
    > + FiperDiv1 = 1000000 * OutputClock / FiperFreq1
    > + tmr_fiper1 = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
    > + max_adj = 1000000000 * (FreqDivRatio - 1.0) - 1
    > +
    > + The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
    > + driver expects that tmr_fiper1 will be correctly set to produce a 1
    > + Pulse Per Second (PPS) signal, since this will be offered to the PPS
    > + subsystem to synchronize the Linux clock.
    > +
    > +Example:
    > +
    > + ptp_clock@24E00 {
    > + compatible = "fsl,etsec-ptp";
    > + reg = <0x24E00 0xB0>;
    > + interrupts = <12 0x8 13 0x8>;
    > + interrupt-parent = < &ipic >;
    > + tclk-period = <10>;
    > + tmr-prsc = <100>;
    > + tmr-add = <0x999999A4>;
    > + cksel = <0x1>;
    > + tmr-fiper1 = <0x3B9AC9F6>;
    > + tmr-fiper2 = <0x00018696>;
    > + max-adj = <659999998>;
    > + };
    > diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
    > index 183f2aa..85a7eaa 100644
    > --- a/arch/powerpc/boot/dts/mpc8313erdb.dts
    > +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
    > @@ -208,6 +208,20 @@
    > sleep = <&pmc 0x00300000>;
    > };
    >
    > + ptp_clock@24E00 {
    > + compatible = "fsl,etsec-ptp";
    > + reg = <0x24E00 0xB0>;
    > + interrupts = <12 0x8 13 0x8>;
    > + interrupt-parent = < &ipic >;
    > + tclk-period = <10>;
    > + tmr-prsc = <100>;
    > + tmr-add = <0x999999A4>;
    > + cksel = <0x1>;
    > + tmr-fiper1 = <0x3B9AC9F6>;
    > + tmr-fiper2 = <0x00018696>;
    > + max-adj = <659999998>;
    > + };
    > +
    > enet0: ethernet@24000 {
    > #address-cells = <1>;
    > #size-cells = <1>;
    > diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
    > index cafc128..74208cd 100644
    > --- a/arch/powerpc/boot/dts/mpc8572ds.dts
    > +++ b/arch/powerpc/boot/dts/mpc8572ds.dts
    > @@ -324,6 +324,20 @@
    > };
    > };
    >
    > + ptp_clock@24E00 {
    > + compatible = "fsl,etsec-ptp";
    > + reg = <0x24E00 0xB0>;
    > + interrupts = <68 2 69 2 70 2 71 2>;
    > + interrupt-parent = < &mpic >;
    > + tclk-period = <5>;
    > + tmr-prsc = <200>;
    > + tmr-add = <0xAAAAAAAB>;
    > + cksel = <1>;
    > + tmr-fiper1 = <0x3B9AC9FB>;
    > + tmr-fiper2 = <0x3B9AC9FB>;
    > + max-adj = <499999999>;
    > + };
    > +
    > enet0: ethernet@24000 {
    > #address-cells = <1>;
    > #size-cells = <1>;
    > diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
    > index 1101914..39d73bb 100644
    > --- a/arch/powerpc/boot/dts/p2020ds.dts
    > +++ b/arch/powerpc/boot/dts/p2020ds.dts
    > @@ -336,6 +336,20 @@
    > phy_type = "ulpi";
    > };
    >
    > + ptp_clock@24E00 {
    > + compatible = "fsl,etsec-ptp";
    > + reg = <0x24E00 0xB0>;
    > + interrupts = <68 2 69 2 70 2>;
    > + interrupt-parent = < &mpic >;
    > + tclk-period = <5>;
    > + tmr-prsc = <200>;
    > + tmr-add = <0xCCCCCCCD>;
    > + cksel = <1>;
    > + tmr-fiper1 = <0x3B9AC9FB>;
    > + tmr-fiper2 = <0x0001869B>;
    > + max-adj = <249999999>;
    > + };
    > +
    > enet0: ethernet@24000 {
    > #address-cells = <1>;
    > #size-cells = <1>;
    > diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
    > index da4cb0d..5498fb9 100644
    > --- a/arch/powerpc/boot/dts/p2020rdb.dts
    > +++ b/arch/powerpc/boot/dts/p2020rdb.dts
    > @@ -396,6 +396,20 @@
    > phy_type = "ulpi";
    > };
    >
    > + ptp_clock@24E00 {
    > + compatible = "fsl,etsec-ptp";
    > + reg = <0x24E00 0xB0>;
    > + interrupts = <68 2 69 2 70 2>;
    > + interrupt-parent = < &mpic >;
    > + tclk-period = <5>;
    > + tmr-prsc = <200>;
    > + tmr-add = <0xCCCCCCCD>;
    > + cksel = <1>;
    > + tmr-fiper1 = <0x3B9AC9FB>;
    > + tmr-fiper2 = <0x0001869B>;
    > + max-adj = <249999999>;
    > + };
    > +
    > enet0: ethernet@24000 {
    > #address-cells = <1>;
    > #size-cells = <1>;
    > diff --git a/drivers/net/Makefile b/drivers/net/Makefile
    > index b90738d..c303f5f 100644
    > --- a/drivers/net/Makefile
    > +++ b/drivers/net/Makefile
    > @@ -31,6 +31,7 @@ obj-$(CONFIG_ATL2) += atlx/
    > obj-$(CONFIG_ATL1E) += atl1e/
    > obj-$(CONFIG_ATL1C) += atl1c/
    > obj-$(CONFIG_GIANFAR) += gianfar_driver.o
    > +obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o
    > obj-$(CONFIG_TEHUTI) += tehuti.o
    > obj-$(CONFIG_ENIC) += enic/
    > obj-$(CONFIG_JME) += jme.o
    > diff --git a/drivers/net/gianfar_ptp.c b/drivers/net/gianfar_ptp.c
    > new file mode 100644
    > index 0000000..84fff15
    > --- /dev/null
    > +++ b/drivers/net/gianfar_ptp.c
    > @@ -0,0 +1,448 @@
    > +/*
    > + * PTP 1588 clock using the eTSEC
    > + *
    > + * Copyright (C) 2010 OMICRON electronics GmbH
    > + *
    > + * This program is free software; you can redistribute it and/or modify
    > + * it under the terms of the GNU General Public License as published by
    > + * the Free Software Foundation; either version 2 of the License, or
    > + * (at your option) any later version.
    > + *
    > + * This program is distributed in the hope that it will be useful,
    > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
    > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    > + * GNU General Public License for more details.
    > + *
    > + * You should have received a copy of the GNU General Public License
    > + * along with this program; if not, write to the Free Software
    > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    > + */
    > +#include <linux/device.h>
    > +#include <linux/hrtimer.h>
    > +#include <linux/init.h>
    > +#include <linux/interrupt.h>
    > +#include <linux/kernel.h>
    > +#include <linux/module.h>
    > +#include <linux/of.h>
    > +#include <linux/of_platform.h>
    > +#include <linux/timex.h>
    > +#include <linux/io.h>
    > +
    > +#include <linux/ptp_clock_kernel.h>
    > +
    > +#include "gianfar_ptp_reg.h"
    > +#include "gianfar.h"
    > +
    > +#define DRIVER "gianfar_ptp"
    > +#define N_ALARM 1 /* first alarm is used internally to reset fipers */
    > +#define N_EXT_TS 2
    > +#define REG_SIZE sizeof(struct gianfar_ptp_registers)
    > +
    > +struct etsects {
    > + struct gianfar_ptp_registers *regs;
    > + struct ptp_clock *clock;
    > + struct ptp_clock_info caps;
    > + int irq;
    > + u64 alarm_interval; /* for periodic alarm */
    > + u64 alarm_value;
    > + u32 tclk_period; /* nanoseconds */
    > + u32 tmr_prsc;
    > + u32 tmr_add;
    > + u32 cksel;
    > + u32 tmr_fiper1;
    > + u32 tmr_fiper2;
    > +};
    > +
    > +/* Private globals */
    > +static struct etsects the_clock;
    > +DEFINE_SPINLOCK(register_lock);
    > +
    > +/*
    > + * Register access functions
    > + */
    > +
    > +static u64 tmr_cnt_read(struct etsects *etsects)
    > +{
    > + u64 ns;
    > + u32 lo, hi;
    > +
    > + lo = gfar_read(&etsects->regs->tmr_cnt_l);
    > + hi = gfar_read(&etsects->regs->tmr_cnt_h);
    > + ns = ((u64) hi) << 32;
    > + ns |= lo;
    > + return ns;
    > +}
    > +
    > +static void tmr_cnt_write(struct etsects *etsects, u64 ns)
    > +{
    > + u32 hi = ns >> 32;
    > + u32 lo = ns & 0xffffffff;
    > +
    > + gfar_write(&etsects->regs->tmr_cnt_l, lo);
    > + gfar_write(&etsects->regs->tmr_cnt_h, hi);
    > +}
    > +
    > +static void set_alarm(struct etsects *etsects)
    > +{
    > + u64 ns;
    > + u32 lo, hi;
    > +
    > + ns = tmr_cnt_read(etsects) + 1500000000ULL;
    > + ns = div_u64(ns, 1000000000UL) * 1000000000ULL;
    > + ns -= etsects->tclk_period;
    > + hi = ns >> 32;
    > + lo = ns & 0xffffffff;
    > + gfar_write(&etsects->regs->tmr_alarm1_l, lo);
    > + gfar_write(&etsects->regs->tmr_alarm1_h, hi);
    > +}
    > +
    > +static void set_fipers(struct etsects *etsects)
    > +{
    > + u32 tmr_ctrl = gfar_read(&etsects->regs->tmr_ctrl);
    > +
    > + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl & (~TE));
    > + gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc);
    > + gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
    > + gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
    > + set_alarm(etsects);
    > + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|TE);
    > +}
    > +
    > +/*
    > + * Interrupt service routine
    > + */
    > +
    > +static irqreturn_t isr(int irq, void *priv)
    > +{
    > + struct etsects *etsects = priv;
    > + struct ptp_clock_event event;
    > + u64 ns;
    > + u32 ack = 0, lo, hi, mask, val;
    > +
    > + val = gfar_read(&etsects->regs->tmr_tevent);
    > +
    > + if (val & ETS1) {
    > + ack |= ETS1;
    > + hi = gfar_read(&etsects->regs->tmr_etts1_h);
    > + lo = gfar_read(&etsects->regs->tmr_etts1_l);
    > + event.type = PTP_CLOCK_EXTTS;
    > + event.index = 0;
    > + event.timestamp = ((u64) hi) << 32;
    > + event.timestamp |= lo;
    > + ptp_clock_event(etsects->clock, &event);
    > + }
    > +
    > + if (val & ETS2) {
    > + ack |= ETS2;
    > + hi = gfar_read(&etsects->regs->tmr_etts2_h);
    > + lo = gfar_read(&etsects->regs->tmr_etts2_l);
    > + event.type = PTP_CLOCK_EXTTS;
    > + event.index = 1;
    > + event.timestamp = ((u64) hi) << 32;
    > + event.timestamp |= lo;
    > + ptp_clock_event(etsects->clock, &event);
    > + }
    > +
    > + if (val & ALM2) {
    > + ack |= ALM2;
    > + if (etsects->alarm_value) {
    > + event.type = PTP_CLOCK_ALARM;
    > + event.index = 0;
    > + event.timestamp = etsects->alarm_value;
    > + ptp_clock_event(etsects->clock, &event);
    > + }
    > + if (etsects->alarm_interval) {
    > + ns = etsects->alarm_value + etsects->alarm_interval;
    > + hi = ns >> 32;
    > + lo = ns & 0xffffffff;
    > + spin_lock(&register_lock);
    > + gfar_write(&etsects->regs->tmr_alarm2_l, lo);
    > + gfar_write(&etsects->regs->tmr_alarm2_h, hi);
    > + spin_unlock(&register_lock);
    > + etsects->alarm_value = ns;
    > + } else {
    > + gfar_write(&etsects->regs->tmr_tevent, ALM2);
    > + spin_lock(&register_lock);
    > + mask = gfar_read(&etsects->regs->tmr_temask);
    > + mask &= ~ALM2EN;
    > + gfar_write(&etsects->regs->tmr_temask, mask);
    > + spin_unlock(&register_lock);
    > + etsects->alarm_value = 0;
    > + etsects->alarm_interval = 0;
    > + }
    > + }
    > +
    > + if (val & PP1) {
    > + ack |= PP1;
    > + event.type = PTP_CLOCK_PPS;
    > + ptp_clock_event(etsects->clock, &event);
    > + }
    > +
    > + if (ack) {
    > + gfar_write(&etsects->regs->tmr_tevent, ack);
    > + return IRQ_HANDLED;
    > + } else
    > + return IRQ_NONE;
    > +}
    > +
    > +/*
    > + * PTP clock operations
    > + */
    > +
    > +static int ptp_gianfar_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
    > +{
    > + u64 adj;
    > + u32 diff, tmr_add;
    > + int neg_adj = 0;
    > + struct etsects *etsects = container_of(ptp, struct etsects, caps);
    > +
    > + if (ppb < 0) {
    > + neg_adj = 1;
    > + ppb = -ppb;
    > + }
    > + tmr_add = etsects->tmr_add;
    > + adj = tmr_add;
    > + adj *= ppb;
    > + diff = div_u64(adj, 1000000000ULL);
    > +
    > + tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff;
    > +
    > + gfar_write(&etsects->regs->tmr_add, tmr_add);
    > +
    > + return 0;
    > +}
    > +
    > +static int ptp_gianfar_adjtime(struct ptp_clock_info *ptp, s64 delta)
    > +{
    > + s64 now;
    > + unsigned long flags;
    > + struct etsects *etsects = container_of(ptp, struct etsects, caps);
    > +
    > + spin_lock_irqsave(&register_lock, flags);
    > +
    > + now = tmr_cnt_read(etsects);
    > + now += delta;
    > + tmr_cnt_write(etsects, now);
    > +
    > + spin_unlock_irqrestore(&register_lock, flags);
    > +
    > + set_fipers(etsects);
    > +
    > + return 0;
    > +}
    > +
    > +static int ptp_gianfar_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
    > +{
    > + u64 ns;
    > + u32 remainder;
    > + unsigned long flags;
    > + struct etsects *etsects = container_of(ptp, struct etsects, caps);
    > +
    > + spin_lock_irqsave(&register_lock, flags);
    > +
    > + ns = tmr_cnt_read(etsects);
    > +
    > + spin_unlock_irqrestore(&register_lock, flags);
    > +
    > + ts->tv_sec = div_u64_rem(ns, 1000000000, &remainder);
    > + ts->tv_nsec = remainder;
    > + return 0;
    > +}
    > +
    > +static int ptp_gianfar_settime(struct ptp_clock_info *ptp,
    > + const struct timespec *ts)
    > +{
    > + u64 ns;
    > + unsigned long flags;
    > + struct etsects *etsects = container_of(ptp, struct etsects, caps);
    > +
    > + ns = ts->tv_sec * 1000000000ULL;
    > + ns += ts->tv_nsec;
    > +
    > + spin_lock_irqsave(&register_lock, flags);
    > +
    > + tmr_cnt_write(etsects, ns);
    > + set_fipers(etsects);
    > +
    > + spin_unlock_irqrestore(&register_lock, flags);
    > +
    > + return 0;
    > +}
    > +
    > +static int ptp_gianfar_enable(struct ptp_clock_info *ptp,
    > + struct ptp_clock_request *rq, int on)
    > +{
    > + struct etsects *etsects = container_of(ptp, struct etsects, caps);
    > + unsigned long flags;
    > + u32 bit, mask;
    > +
    > + switch (rq->type) {
    > + case PTP_CLK_REQ_EXTTS:
    > + switch (rq->extts.index) {
    > + case 0:
    > + bit = ETS1EN;
    > + break;
    > + case 1:
    > + bit = ETS2EN;
    > + break;
    > + default:
    > + return -EINVAL;
    > + }
    > + spin_lock_irqsave(&register_lock, flags);
    > + mask = gfar_read(&etsects->regs->tmr_temask);
    > + if (on)
    > + mask |= bit;
    > + else
    > + mask &= ~bit;
    > + gfar_write(&etsects->regs->tmr_temask, mask);
    > + spin_unlock_irqrestore(&register_lock, flags);
    > + return 0;
    > +
    > + case PTP_CLK_REQ_PPS:
    > + spin_lock_irqsave(&register_lock, flags);
    > + mask = gfar_read(&etsects->regs->tmr_temask);
    > + if (on)
    > + mask |= PP1EN;
    > + else
    > + mask &= ~PP1EN;
    > + gfar_write(&etsects->regs->tmr_temask, mask);
    > + spin_unlock_irqrestore(&register_lock, flags);
    > + return 0;
    > +
    > + default:
    > + break;
    > + }
    > +
    > + return -EOPNOTSUPP;
    > +}
    > +
    > +static struct ptp_clock_info ptp_gianfar_caps = {
    > + .owner = THIS_MODULE,
    > + .name = "gianfar clock",
    > + .max_adj = 512000,
    > + .n_alarm = N_ALARM,
    > + .n_ext_ts = N_EXT_TS,
    > + .n_per_out = 0,
    > + .pps = 1,
    > + .adjfreq = ptp_gianfar_adjfreq,
    > + .adjtime = ptp_gianfar_adjtime,
    > + .gettime = ptp_gianfar_gettime,
    > + .settime = ptp_gianfar_settime,
    > + .enable = ptp_gianfar_enable,
    > +};
    > +
    > +/* OF device tree */
    > +
    > +static int get_of_u32(struct device_node *node, char *str, u32 *val)
    > +{
    > + int plen;
    > + const u32 *prop = of_get_property(node, str, &plen);
    > +
    > + if (!prop || plen != sizeof(*prop))
    > + return -1;
    > + *val = *prop;
    > + return 0;
    > +}
    > +
    > +static int gianfar_ptp_probe(struct platform_device *dev,
    > + const struct of_device_id *match)
    > +{
    > + struct device_node *node = dev->dev.of_node;
    > + struct etsects *etsects = &the_clock;
    > + struct timespec now;
    > + u32 tmr_ctrl;
    > +
    > + etsects->caps = ptp_gianfar_caps;
    > +
    > + if (get_of_u32(node, "tclk-period", &etsects->tclk_period) ||
    > + get_of_u32(node, "tmr-prsc", &etsects->tmr_prsc) ||
    > + get_of_u32(node, "tmr-add", &etsects->tmr_add) ||
    > + get_of_u32(node, "cksel", &etsects->cksel) ||
    > + get_of_u32(node, "tmr-fiper1", &etsects->tmr_fiper1) ||
    > + get_of_u32(node, "tmr-fiper2", &etsects->tmr_fiper2) ||
    > + get_of_u32(node, "max-adj", &etsects->caps.max_adj)) {
    > + pr_err("device tree node missing required elements\n");
    > + return -ENODEV;
    > + }
    > +
    > + etsects->irq = irq_of_parse_and_map(node, 0);
    > +
    > + if (etsects->irq == NO_IRQ) {
    > + pr_err("irq not in device tree\n");
    > + return -ENODEV;
    > + }
    > + if (request_irq(etsects->irq, isr, 0, DRIVER, etsects)) {
    > + pr_err("request_irq failed\n");
    > + return -ENODEV;
    > + }
    > + etsects->regs = of_iomap(node, 0);
    > + if (!etsects->regs) {
    > + pr_err("of_iomap ptp registers failed\n");
    > + return -EINVAL;
    > + }
    > + getnstimeofday(&now);
    > + ptp_gianfar_settime(&etsects->caps, &now);
    > +
    > + tmr_ctrl =
    > + (etsects->tclk_period & TCLK_PERIOD_MASK) << TCLK_PERIOD_SHIFT |
    > + (etsects->cksel & CKSEL_MASK) << CKSEL_SHIFT;
    > +
    > + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl);
    > + gfar_write(&etsects->regs->tmr_add, etsects->tmr_add);
    > + gfar_write(&etsects->regs->tmr_prsc, etsects->tmr_prsc);
    > + gfar_write(&etsects->regs->tmr_fiper1, etsects->tmr_fiper1);
    > + gfar_write(&etsects->regs->tmr_fiper2, etsects->tmr_fiper2);
    > + set_alarm(etsects);
    > + gfar_write(&etsects->regs->tmr_ctrl, tmr_ctrl|FS|RTPE|TE);
    > +
    > + etsects->clock = ptp_clock_register(&etsects->caps);
    > +
    > + return IS_ERR(etsects->clock) ? PTR_ERR(etsects->clock) : 0;
    > +}
    > +
    > +static int gianfar_ptp_remove(struct platform_device *dev)
    > +{
    > + gfar_write(&the_clock.regs->tmr_temask, 0);
    > + gfar_write(&the_clock.regs->tmr_ctrl, 0);
    > +
    > + ptp_clock_unregister(the_clock.clock);
    > + free_irq(the_clock.irq, &the_clock);
    > + iounmap(the_clock.regs);
    > +
    > + return 0;
    > +}
    > +
    > +static struct of_device_id match_table[] = {
    > + { .compatible = "fsl,etsec-ptp" },
    > + {},
    > +};
    > +
    > +static struct of_platform_driver gianfar_ptp_driver = {
    > + .driver = {
    > + .name = "gianfar_ptp",
    > + .of_match_table = match_table,
    > + .owner = THIS_MODULE,
    > + },
    > + .probe = gianfar_ptp_probe,
    > + .remove = gianfar_ptp_remove,
    > +};
    > +
    > +/* module operations */
    > +
    > +static int __init ptp_gianfar_init(void)
    > +{
    > + return of_register_platform_driver(&gianfar_ptp_driver);
    > +}
    > +
    > +module_init(ptp_gianfar_init);
    > +
    > +static void __exit ptp_gianfar_exit(void)
    > +{
    > + of_unregister_platform_driver(&gianfar_ptp_driver);
    > +}
    > +
    > +module_exit(ptp_gianfar_exit);
    > +
    > +MODULE_AUTHOR("Richard Cochran <richard.cochran@omicron.at>");
    > +MODULE_DESCRIPTION("PTP clock using the eTSEC");
    > +MODULE_LICENSE("GPL");
    > diff --git a/drivers/net/gianfar_ptp_reg.h b/drivers/net/gianfar_ptp_reg.h
    > new file mode 100644
    > index 0000000..95e171f
    > --- /dev/null
    > +++ b/drivers/net/gianfar_ptp_reg.h
    > @@ -0,0 +1,113 @@
    > +/* gianfar_ptp_reg.h
    > + * Generated by regen.tcl on Thu May 13 01:38:57 PM CEST 2010
    > + *
    > + * PTP 1588 clock using the gianfar eTSEC
    > + *
    > + * Copyright (C) 2010 OMICRON electronics GmbH
    > + *
    > + * This program is free software; you can redistribute it and/or modify
    > + * it under the terms of the GNU General Public License as published by
    > + * the Free Software Foundation; either version 2 of the License, or
    > + * (at your option) any later version.
    > + *
    > + * This program is distributed in the hope that it will be useful,
    > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
    > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
    > + * GNU General Public License for more details.
    > + *
    > + * You should have received a copy of the GNU General Public License
    > + * along with this program; if not, write to the Free Software
    > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
    > + */
    > +#ifndef _GIANFAR_PTP_REG_H_
    > +#define _GIANFAR_PTP_REG_H_
    > +
    > +struct gianfar_ptp_registers {
    > + u32 tmr_ctrl; /* Timer control register */
    > + u32 tmr_tevent; /* Timestamp event register */
    > + u32 tmr_temask; /* Timer event mask register */
    > + u32 tmr_pevent; /* Timestamp event register */
    > + u32 tmr_pemask; /* Timer event mask register */
    > + u32 tmr_stat; /* Timestamp status register */
    > + u32 tmr_cnt_h; /* Timer counter high register */
    > + u32 tmr_cnt_l; /* Timer counter low register */
    > + u32 tmr_add; /* Timer drift compensation addend register */
    > + u32 tmr_acc; /* Timer accumulator register */
    > + u32 tmr_prsc; /* Timer prescale */
    > + u8 res1[4];
    > + u32 tmroff_h; /* Timer offset high */
    > + u32 tmroff_l; /* Timer offset low */
    > + u8 res2[8];
    > + u32 tmr_alarm1_h; /* Timer alarm 1 high register */
    > + u32 tmr_alarm1_l; /* Timer alarm 1 high register */
    > + u32 tmr_alarm2_h; /* Timer alarm 2 high register */
    > + u32 tmr_alarm2_l; /* Timer alarm 2 high register */
    > + u8 res3[48];
    > + u32 tmr_fiper1; /* Timer fixed period interval */
    > + u32 tmr_fiper2; /* Timer fixed period interval */
    > + u32 tmr_fiper3; /* Timer fixed period interval */
    > + u8 res4[20];
    > + u32 tmr_etts1_h; /* Timestamp of general purpose external trigger */
    > + u32 tmr_etts1_l; /* Timestamp of general purpose external trigger */
    > + u32 tmr_etts2_h; /* Timestamp of general purpose external trigger */
    > + u32 tmr_etts2_l; /* Timestamp of general purpose external trigger */
    > +};
    > +
    > +/* Bit definitions for the TMR_CTRL register */
    > +#define ALM1P (1<<31) /* Alarm1 output polarity */
    > +#define ALM2P (1<<30) /* Alarm2 output polarity */
    > +#define FS (1<<28) /* FIPER start indication */
    > +#define PP1L (1<<27) /* Fiper1 pulse loopback mode enabled. */
    > +#define PP2L (1<<26) /* Fiper2 pulse loopback mode enabled. */
    > +#define TCLK_PERIOD_SHIFT (16) /* 1588 timer reference clock period. */
    > +#define TCLK_PERIOD_MASK (0x3ff)
    > +#define RTPE (1<<15) /* Record Tx Timestamp to PAL Enable. */
    > +#define FRD (1<<14) /* FIPER Realignment Disable */
    > +#define ESFDP (1<<11) /* External Tx/Rx SFD Polarity. */
    > +#define ESFDE (1<<10) /* External Tx/Rx SFD Enable. */
    > +#define ETEP2 (1<<9) /* External trigger 2 edge polarity */
    > +#define ETEP1 (1<<8) /* External trigger 1 edge polarity */
    > +#define COPH (1<<7) /* Generated clock (TSEC_1588_GCLK) output phase. */
    > +#define CIPH (1<<6) /* External oscillator input clock phase. */
    > +#define TMSR (1<<5) /* Timer soft reset. When enabled, it resets all the timer registers and state machines. */
    > +#define BYP (1<<3) /* Bypass drift compensated clock */
    > +#define TE (1<<2) /* 1588 timer enable. If not enabled, all the timer registers and state machines are disabled. */
    > +#define CKSEL_SHIFT (0) /* 1588 Timer reference clock source select. */
    > +#define CKSEL_MASK (0x3)
    > +
    > +/* Bit definitions for the TMR_TEVENT register */
    > +#define ETS2 (1<<25) /* External trigger 2 timestamp sampled */
    > +#define ETS1 (1<<24) /* External trigger 1 timestamp sampled */
    > +#define ALM2 (1<<17) /* Current time equaled alarm time register 2 */
    > +#define ALM1 (1<<16) /* Current time equaled alarm time register 1 */
    > +#define PP1 (1<<7) /* Indicates that a periodic pulse has been generated based on FIPER1 register */
    > +#define PP2 (1<<6) /* Indicates that a periodic pulse has been generated based on FIPER2 register */
    > +#define PP3 (1<<5) /* Indicates that a periodic pulse has been generated based on FIPER3 register */
    > +
    > +/* Bit definitions for the TMR_TEMASK register */
    > +#define ETS2EN (1<<25) /* External trigger 2 timestamp sample event enable */
    > +#define ETS1EN (1<<24) /* External trigger 1 timestamp sample event enable */
    > +#define ALM2EN (1<<17) /* Timer ALM2 event enable */
    > +#define ALM1EN (1<<16) /* Timer ALM1 event enable */
    > +#define PP1EN (1<<7) /* Periodic pulse event 1 enable */
    > +#define PP2EN (1<<6) /* Periodic pulse event 2 enable */
    > +
    > +/* Bit definitions for the TMR_PEVENT register */
    > +#define TXP2 (1<<9) /* Indicates that a PTP frame has been transmitted and its timestamp is stored in TXTS2 register */
    > +#define TXP1 (1<<8) /* Indicates that a PTP frame has been transmitted and its timestamp is stored in TXTS1 register */
    > +#define RXP (1<<0) /* Indicates that a PTP frame has been received */
    > +
    > +/* Bit definitions for the TMR_PEMASK register */
    > +#define TXP2EN (1<<9) /* Transmit PTP packet event 2 enable */
    > +#define TXP1EN (1<<8) /* Transmit PTP packet event 1 enable */
    > +#define RXPEN (1<<0) /* Receive PTP packet event enable */
    > +
    > +/* Bit definitions for the TMR_STAT register */
    > +#define STAT_VEC_SHIFT (0) /* Timer general purpose status vector */
    > +#define STAT_VEC_MASK (0x3f)
    > +
    > +/* Bit definitions for the TMR_PRSC register */
    > +#define PRSC_OCK_SHIFT (0) /* Output clock division/prescale factor. */
    > +#define PRSC_OCK_MASK (0xffff)
    > +
    > +#endif
    > diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
    > index 17be208..a4df298 100644
    > --- a/drivers/ptp/Kconfig
    > +++ b/drivers/ptp/Kconfig
    > @@ -24,4 +24,17 @@ config PTP_1588_CLOCK
    > To compile this driver as a module, choose M here: the module
    > will be called ptp.
    >
    > +config PTP_1588_CLOCK_GIANFAR
    > + tristate "Freescale eTSEC as PTP clock"
    > + depends on PTP_1588_CLOCK
    > + depends on GIANFAR
    > + help
    > + This driver adds support for using the eTSEC as a PTP
    > + clock. This clock is only useful if your PTP programs are
    > + getting hardware time stamps on the PTP Ethernet packets
    > + using the SO_TIMESTAMPING API.
    > +
    > + To compile this driver as a module, choose M here: the module
    > + will be called gianfar_ptp.
    > +
    > endmenu




    \
     
     \ /
      Last update: 2011-02-02 03:07    [W:3.638 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site