lkml.org 
[lkml]   [2011]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subjectpcmcia vs. MECR on pxa25x/sa1111

After 2.6.34 changes, __pxa2xx_drv_pcmcia_probe() was replaced by
sa1111_pcmcia_add(). That unfortunately means that configure_sockets()
is not called, leading to MECR not being set properly, leading to
strange crashes.

Tested on pxa255+sa1111, I do not have lubbock board nearby. Perhaps
cleaner solution exists?

Signed-off-by: Pavel Machek <pma@sysgo.com>


--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -204,10 +204,10 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
}
#endif

-static void pxa2xx_configure_sockets(struct device *dev)
+void pxa2xx_configure_sockets(struct device *dev)
{
struct pcmcia_low_level *ops = dev->platform_data;

/*
* We have at least one socket, so set MECR:CIT
* (Card Is There)
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -209,6 +209,8 @@ static struct pcmcia_low_level lubbock_pcmcia_ops = {

#include "pxa2xx_base.h"

+extern void pxa2xx_configure_sockets(struct device *dev);
+
int pcmcia_lubbock_init(struct sa1111_dev *sadev)
{
int ret = -ENODEV;
@@ -228,6 +230,7 @@ int pcmcia_lubbock_init(struct sa1111_dev *sadev)
pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
pxa2xx_drv_pcmcia_add_one);
+ pxa2xx_configure_sockets(&(sadev->dev));
}

return ret;

\
 
 \ /
  Last update: 2011-02-01 13:05    [W:0.051 / U:6.300 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site